org.freedesktop.libmbim.Error.Status.Failure: Failure

Hugo Osvaldo Barrera hugo at whynothugo.nl
Wed Apr 2 00:59:48 UTC 2025


I'm using a Quectel EM05-CE, and trying to connect via simple connect
using:

    doas mmcli -m 0 --simple-connect="pin=1234,profile-id=1"

This fails with a rather opaque error message:

    error: couldn't connect the modem: 'GDBus.Error:org.freedesktop.libmbim.Error.Status.Failure: Failure'

The service itself logs:

    <msg> [modem0] simple connect started... 
    <msg> [modem0] simple connect state (6/10): register 
    <msg> [modem0] simple connect state (7/10): wait to get packet service state attached 
    <msg> [modem0] simple connect state (8/10): bearer 
    <msg> [modem0] simple connect state (9/10): connect 
    <msg> [modem0] state changed (registered -> connecting) 
    <wrn> [modem0/bearer0] connection attempt #2 failed: Failure 
    <msg> [modem0] state changed (connecting -> registered) 
    <msg> [modem0/bearer0] connection #2 finished: duration 0s 
    <wrn> [modem0] couldn't connect bearer: Failure 

I'm using modemmanager-1.22.0-r2 on Alpine Linux on x86_64. Any idea how
to further debug the issue?

The following is the output of mmcli -m 0

  --------------------------------
  General  |                 path: /org/freedesktop/ModemManager1/Modem/0
           |            device id: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  --------------------------------
  Hardware |         manufacturer: Quectel
           |                model: Quectel EM05-CE
           |    firmware revision: EM05CEFCR08A13M1G_LNV
           |         h/w revision: QUECTEL Mobile Broadband Modul
           |            supported: gsm-umts, lte
           |              current: gsm-umts, lte
           |         equipment id: XXXXXXXXXXXXXXX
  --------------------------------
  System   |               device: /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2
           |              physdev: /sys/devices/pci0000:00/0000:00:14.0/usb3/3-2
           |              drivers: cdc_mbim
           |               plugin: quectel
           |         primary port: cdc-wdm0
           |                ports: cdc-wdm0 (mbim), wwan0 (net)
  --------------------------------
  Status   |                 lock: sim-pin2
           |       unlock retries: sim-pin2 (5)
           |                state: registered
           |          power state: on
           |          access tech: lte
           |       signal quality: 22% (recent)
  --------------------------------
  Modes    |            supported: allowed: 2g, 3g, 4g; preferred: none
           |              current: allowed: 2g, 3g, 4g; preferred: none
  --------------------------------
  IP       |            supported: ipv4, ipv6, ipv4v6
  --------------------------------
  3GPP     |                 imei: XXXXXXXXXXXXXXX
           |        enabled locks: sim, fixed-dialing
           |          operator id: 20408
           |        operator name: Youfone
           |         registration: home
           | packet service state: attached
  --------------------------------
  SIM      |     primary sim path: /org/freedesktop/ModemManager1/SIM/0
  --------------------------------
  Bearer   |                paths: /org/freedesktop/ModemManager1/Bearer/0

Thanks,

-- 
Hugo



More information about the ModemManager-devel mailing list