<div dir="ltr"><font face="monospace, monospace">After flashing the firmware to GENERIC (tmobile) on MC7455 I get an error about InvalidTransition.</font><div><font face="monospace, monospace"><br></font></div><div><font face="monospace, monospace">Here are the firmware files:<br></font><div><div><font face="monospace, monospace"><br></font></div><div><div><font face="monospace, monospace">-rwxr-xr-x 1 root root 64432017 May 19 14:38 SWI9X30C_02.24.05.06.cwe</font></div><div><font face="monospace, monospace">-rwxr-xr-x 1 root root 3889 Jul 13 20:40 SWI9X30C_02.24.05.06_GENERIC_002.026_000.nvu</font></div></div><div><font face="monospace, monospace"><br></font></div><div><font face="monospace, monospace"><br></font></div><div><font face="monospace, monospace">Here's the error, and I also attached the entire log.</font></div><div><font face="monospace, monospace"><br></font></div><div><font face="monospace, monospace">error: couldn't connect the modem: 'GDBus.Error:org.freedesktop.libqmi.Error.Protocol.InvalidTransition: Couldn't set operating mode: QMI protocol error (60): 'InvalidTransition''</font><br></div><div><font face="monospace, monospace"><br></font></div><div><font face="monospace, monospace">Here is a longer excerpt:</font></div><div><font face="monospace, monospace"><br></font></div><div><font face="monospace, monospace"><div>Wed Sep 13 17:59:47 2017 user.notice ModemManager: hotplug: setting interface 'broadband' as available</div><div>Wed Sep 13 17:59:47 2017 daemon.notice netifd: Interface 'broadband' is setting up now</div><div>Wed Sep 13 17:59:47 2017 daemon.notice netifd: broadband (7376): modem available at /org/freedesktop/ModemManager1/Modem/0</div><div>Wed Sep 13 17:59:47 2017 daemon.notice netifd: broadband (7376): imsi is 310260655174033</div><div>Wed Sep 13 17:59:47 2017 daemon.notice netifd: broadband (7376): set APN to <a href="http://fast.t-mobile.com">fast.t-mobile.com</a> because apn was auto and IMSI was 310260655174033</div><div>Wed Sep 13 17:59:47 2017 daemon.notice netifd: broadband (7376): starting connection with apn=<a href="http://fast.t-mobile.com">fast.t-mobile.com</a>,pin=1234</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <info> [1505325587.550808] [mm-iface-modem-simple.c:641] connect_auth_ready(): Simple connect started...</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.550866] [mm-iface-modem-simple.c:651] connect_auth_ready(): PIN: 1234</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.550904] [mm-iface-modem-simple.c:653] connect_auth_ready(): Operator ID: unspecified</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.550940] [mm-iface-modem-simple.c:655] connect_auth_ready(): Allowed roaming: yes</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.550976] [mm-iface-modem-simple.c:657] connect_auth_ready(): APN: <a href="http://fast.t-mobile.com">fast.t-mobile.com</a></div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.551013] [mm-iface-modem-simple.c:665] connect_auth_ready(): IP family: unspecified</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.551047] [mm-iface-modem-simple.c:673] connect_auth_ready(): Allowed authentication: unspecified</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.551084] [mm-iface-modem-simple.c:675] connect_auth_ready(): User: unspecified</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.551121] [mm-iface-modem-simple.c:677] connect_auth_ready(): Password: unspecified</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.551159] [mm-iface-modem-simple.c:679] connect_auth_ready(): Number: unspecified</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <info> [1505325587.551195] [mm-iface-modem-simple.c:461] connection_step(): Simple connect state (3/8): Enable</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <info> [1505325587.551272] [mm-iface-modem.c:1431] __iface_modem_update_state_internal(): Modem /org/freedesktop/ModemManager1/Modem/0: state changed (disabled -> enabling)</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.551618] [mm-broadband-modem.c:8821] enabling_started(): Skipping modem initialization: device hotplugged</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.551666] [mm-port-serial.c:1158] mm_port_serial_open(): (ttyUSB2) opening serial port...</div><div>Wed Sep 13 17:59:47 2017 daemon.warn [4129]: <warn> [1505325587.552355] [mm-port-serial.c:513] real_config_fd(): (ttyUSB2): port attributes not fully set</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.552451] [mm-port-serial.c:1288] mm_port_serial_open(): (ttyUSB2) device open count is 1 (open)</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.552495] [mm-port-serial-at.c:495] mm_port_serial_at_run_init_sequence(): (ttyUSB2): running init sequence...</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.552569] [mm-port-serial.c:1158] mm_port_serial_open(): (ttyUSB0) opening serial port...</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.552716] [mm-port-serial.c:1288] mm_port_serial_open(): (ttyUSB0) device open count is 1 (open)</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.552760] [mm-broadband-modem.c:8837] enabling_started(): Flashing primary AT port before enabling...</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.552833] [mm-port-serial-at.c:459] debug_log(): (ttyUSB2): --> 'ATE0<CR>'</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.569542] [mm-port-serial-at.c:459] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.569711] [mm-port-serial-at.c:459] debug_log(): (ttyUSB2): --> 'ATV1<CR>'</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.579978] [mm-port-serial-at.c:459] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.580145] [mm-port-serial-at.c:459] debug_log(): (ttyUSB2): --> 'AT+CMEE=1<CR>'</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.599273] [mm-port-serial-at.c:459] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.599444] [mm-port-serial-at.c:459] debug_log(): (ttyUSB2): --> 'ATX4<CR>'</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.609063] [mm-port-serial-at.c:459] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.609234] [mm-port-serial-at.c:459] debug_log(): (ttyUSB2): --> 'AT&C1<CR>'</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.619646] [mm-port-serial-at.c:459] debug_log(): (ttyUSB2): <-- '<CR><LF>OK<CR><LF>'</div><div>Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.654312] [mm-broadband-modem-qmi.c:3276] load_power_state(): Getting device operating mode...</div><div>Wed Sep 13 17:59:47 2017 daemon.debug [4129]: [/dev/cdc-wdm0] sent message...</div><div><<<<<< RAW:</div><div><<<<<< length = 13</div><div><<<<<< data = 01:0C:00:00:02:02:00:14:00:2D:00:00:00</div><div>Wed Sep 13 17:59:47 2017 daemon.debug [4129]: [/dev/cdc-wdm0] sent generic request (translated)...</div><div><<<<<< QMUX:</div><div><<<<<< length = 12</div><div><<<<<< flags = 0x00</div><div><<<<<< service = "dms"</div><div><<<<<< client = 2</div><div><<<<<< QMI:</div><div><<<<<< flags = "none"</div><div><<<<<< transaction = 20</div><div><<<<<< tlv_length = 0</div><div><<<<<< message = "Get Operating Mode" (0x002D)</div><div>Wed Sep 13 17:59:47 2017 daemon.debug [4129]: [/dev/cdc-wdm0] received message...</div><div><<<<<< RAW:</div><div><<<<<< length = 24</div><div><<<<<< data = 01:17:00:80:02:02:02:14:00:2D:00:0B:00:02:04:00:00:00:00:00:01:01:00:01</div><div>Wed Sep 13 17:59:47 2017 daemon.debug [4129]: [/dev/cdc-wdm0] received generic response (translated)...</div><div><<<<<< QMUX:</div><div><<<<<< length = 23</div><div><<<<<< flags = 0x80</div><div><<<<<< service = "dms"</div><div><<<<<< client = 2</div><div><<<<<< QMI:</div><div><<<<<< flags = "response"</div><div><<<<<< transaction = 20</div><div><<<<<< tlv_length = 11</div><div><<<<<< message = "Get Operating Mode" (0x002D)</div><div><<<<<< TLV:</div><div><<<<<< type = "Result" (0x02)</div><div><<<<<< length = 4</div><div><<<<<< value = 00:00:00:00</div><div><<<<<< translated = SUCCESS</div><div><<<<<< TLV:</div><div><Wed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <debug> [1505325587.692362] [mm-broadband-modem-qmi.c:3096] set_operating_mode_context_step(): Setting device operating mode...</div><div>Wed Sep 13 17:59:47 2017 daemon.debug [4129]: [/dev/cdc-wdm0] sent message...</div><div><<<<<< RAW:</div><div><<<<<< length = 17</div><div><<<<<< data = 01:10:00:00:02:02:00:15:00:2E:00:04:00:01:01:00:00</div><div>Wed Sep 13 17:59:47 2017 daemon.debug [4129]: [/dev/cdc-wdm0] sent generic request (translated)...</div><div><<<<<< QMUX:</div><div><<<<<< length = 16</div><div><<<<<< flags = 0x00</div><div><<<<<< service = "dms"</div><div><<<<<< client = 2</div><div><<<<<< QMI:</div><div><<<<<< flags = "none"</div><div><<<<<< transaction = 21</div><div><<<<<< tlv_length = 4</div><div><<<<<< message = "Set Operating Mode" (0x002E)</div><div><<<<<< TLV:</div><div><<<<<< type = "Mode" (0x01)</div><div><<<<<< length = 1</div><div><<<<<< value = 00</div><div><<<<<< translated = online</div><div>Wed Sep 13 17:59:47 2017 daemon.debug [4129]: [/dev/cdc-wdm0] received message...</div><div><<<<<< RAW:</div><div><<<<<< length = 20</div><div><<<<<< data = 01:13:00:80:02:02:02:15:00:2E:00:07:00:02:04:00:01:00:3C:00</div><div>Wed Sep 13 17:59:47 2017 daemon.debug [4129]: [/dev/cdc-wdm0] received generic response (translated)...</div><div><<<<<< QMUX:</div><div><<<<<< length = 19</div><div><<<<<< flags = 0x80</div><div><<<<<< service = "dms"</div><div><<<<<< client = 2</div><div><<<<<< QMI:</div><div><<<<<< flags = "response"</div><div><<<<<< transaction = 21</div><div><<<<<< tlv_length = 7</div><div><<<<<< message = "Set Operating Mode" (0x002E)</div><div><<<<<< TLV:</div><div><<<<<< type = "Result" (0x02)</div><div><<<<<< length = 4</div><div><<<<<< value = 01:00:3C:00</div><div><<<<<< translated = FAILURE: InvalidTransiWed Sep 13 17:59:47 2017 <a href="http://daemon.info">daemon.info</a> [4129]: <info> [1505325587.756461] [mm-iface-modem.c:1431] __iface_modem_update_state_internal(): Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabling -> disabled)</div><div>Wed Sep 13 17:59:47 2017 daemon.notice netifd: broadband (7376): error: couldn't connect the modem: 'GDBus.Error:org.freedesktop.libqmi.Error.Protocol.InvalidTransition: Couldn't set operating mode: QMI protocol error (60): 'InvalidTransition</div></font></div><div><br></div><div><br></div><div>Any idea could be wrong? This worked before I flashed the modem several times.</div><div><br></div></div></div></div>