<!DOCTYPE html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
<p>
<blockquote type="cite">
<pre class="moz-quote-pre" wrap="">Did you connect the modem using NetworkManager (e.g. using nmcli) or
did you connect the modem using mmcli?</pre>
</blockquote>
I see where you are going with this. It seems I expected more of
the interaction between the ModemManager and Network Manager . To
answer your question, no I have only used mmcli. Let me try the
process with nmcli.</p>
<p><br>
</p>
<div class="moz-cite-prefix">On 2/13/24 14:43, Aleksander Morgado
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAAFgFrVc9U=zEbARZ0LBqN2XPcQp6Jc-XLGSuVWb+jdAEubBfg@mail.gmail.com">
<pre class="moz-quote-pre" wrap="">Hey,
On Tue, Feb 13, 2024 at 1:18 PM Garfield Watkins
<a class="moz-txt-link-rfc2396E" href="mailto:garfield.watkins@gmail.com"><garfield.watkins@gmail.com></a> wrote:
</pre>
<blockquote type="cite">
<pre class="moz-quote-pre" wrap="">
Bearer 0 is the initial default bearer.
Bearer 1 is the connected bearer
Output from mmcli -b 1 is:
---------------------------------
General | path: /org/freedesktop/ModemManager1/Bearer/1
| type: default
---------------------------------
Status | connected: yes
| suspended: no
| multiplexed: no
| interface: enp0s20f0u2
| ip timeout: 20
| profile id: 1
---------------------------------
Properties | apn: internet
| roaming: allowed
| ip type: ipv4
---------------------------------
IPv4 configuration | method: dhcp
| prefix: 0
---------------------------------
Statistics | start date: 2024-02-13T12:08:31Z
| attempts: 1
Please note ModemManager is not responsible for running the DHCP
client in the net interface, so if your plugin is reporting "dhcp" IP
method in the connected bearer settings (in your get_ip_config_3gpp()
method), then whoever is the network management layer on top of
ModemManager would be the one in charge of running DHCP client.
I have NetworkManager running. I was under the assumption that it would automatically run its dhcp client on the interface. It seems to do this when I manually issue AT+CGACT=1,1. Its only when running under ModemManager that nothing seems to happen, in fact I have tried to run dhclient enp0s20f0u2 and only then do i get an ip address.
</pre>
</blockquote>
<pre class="moz-quote-pre" wrap="">
Did you connect the modem using NetworkManager (e.g. using nmcli) or
did you connect the modem using mmcli?
</pre>
</blockquote>
</body>
</html>