[Networkmanager] WPA3-Enterprise scan list issue

[manjunatha srinivasan]

Hi
>From the results of listed scanned SSIDs with its capabilities for command
"nmcli dev wifi list", it is observed for a SSID that supports for
WPA3-Enterprise capability is shown as "--". For all other SSIDs, its
capabilities are shown as expected. For e.g. : 802.1X if it is
WPA2-Enterprise, WPA2/WPA3 if it is WPA2-Personal/WPA3-Personal. Please let
me any configuration to be enabled in NetwowrkManager or any fix to be done
in WiFi router part.
Also it is observed while sniffing the packets the capability is
represented for WPA3-Enterprise and also connecting to SSID with capability
WPA3-Enterprise is always successful.
Also I am using the management key for WPA3-Enterprise as 192-bit suite
(i.e. 802-11-wireless-security.key-mgmt wpa-eap-suite-b-192) with nmcli
command while configuring.

Below is O/P where WPA3-Enterprise based SSID shown as "--".
<MAC address>  <wpa3-enterprise-ssid>          Infra  1     260 Mbit/s  74
     ***   --
<MAC address>  <wpa2-enterpise-ssid>           Infra  1     260 Mbit/s  72
     ***   WPA2 802.1X
<MAC address>  <wpa3-personnal-ssid>           Infra  1     260 Mbit/s  72
     ***   WPA3
<MAC address>  <wpa2-personnal-ssid>           Infra  1     260 Mbit/s  72
     ***   WPA2

Thanks & Regards
Manjunatha Srinivasan N
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/networkmanager/attachments/20231019/04a878e1/attachment.htm>