VLAN connection starts late

[Marco Moock]

Hello!

I have a trunk to my PC and I noticed that the VLAN connection needs
some seconds to be active.
This has the affect that after a fast login some applications can't use
the network immediately.

How can I further diagnose that?

The ethernet connection has IPv4/IPv6 disabled (untagged stuff not
allowed) and the VLAN2 connection established IPv4/IPv6 addressing.

The connection.* settings:
connection.id:                          VLAN2
connection.uuid:                        26xyz
connection.stable-id:                   --
connection.type:                        vlan
connection.interface-name:              vlan2
connection.autoconnect:                 yes
connection.autoconnect-priority:        0
connection.autoconnect-retries:         -1 (default)
connection.multi-connect:               0 (default)
connection.auth-retries:                -1
connection.timestamp:                   1726808657
connection.permissions:                 --
connection.zone:                        --
connection.controller:                  --
connection.master:                      --
connection.slave-type:                  --
connection.port-type:                   --
connection.autoconnect-slaves:          -1 (default)
connection.autoconnect-ports:           -1 (default)
connection.down-on-poweroff:            -1 (default)
connection.secondaries:                 --
connection.gateway-ping-timeout:        0
connection.metered:                     unknown
connection.lldp:                        default
connection.mdns:                        -1 (default)
connection.llmnr:                       -1 (default)
connection.dns-over-tls:                -1 (default)
connection.mptcp-flags:                 0x0 (default)
connection.wait-device-timeout:         -1
connection.wait-activation-delay:       -1


-- 
kind regards
Marco