[Nouveau] [Bug 38074] Dual head doesn't work for some combination of monitors (second screen still off)
bugzilla-daemon at freedesktop.org
bugzilla-daemon at freedesktop.org
Tue Dec 20 08:20:04 PST 2011
https://bugs.freedesktop.org/show_bug.cgi?id=38074
--- Comment #16 from Luzipher <luziphermcleod at yahoo.ie> 2011-12-20 08:20:04 PST ---
No, 1280x1024 doesn't work as well (same result: I can move the mouse there but
the screen stays black and enters power save).
Commands used:
xrandr --output DVI-D-1 --set "scaling mode" "None"
xrandr --output DVI-D-1 --right-of LVDS-1 --mode 0xa7
Outputs:
## xrandr --verbose (only for DVI-D-1, after setting scaling mode to none) ##
DVI-D-1 connected (normal left inverted right x axis y axis)
Identifier: 0x94
Timestamp: 615302
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff0010ac2ea053324b30
1e12010380342078eeee91a3544c9926
0f5054a54b00714f8180a94001010101
010101010101283c80a070b023403020
360006442100001a000000ff00473237
344838374f304b325320000000fc0044
454c4c20453234385746500a000000fd
00384c1e5311000a2020202020200037
dithering: Off
supported: Off On Automatic
scaling mode: None
supported: None Full Center Full aspect
1920x1200 (0xa4) 154.0MHz +HSync -VSync +preferred
h: width 1920 start 1968 end 2000 total 2080 skew 0 clock 74.0KHz
v: height 1200 start 1203 end 1209 total 1235 clock 60.0Hz
1600x1200 (0xa5) 162.0MHz +HSync +VSync
h: width 1600 start 1664 end 1856 total 2160 skew 0 clock 75.0KHz
v: height 1200 start 1201 end 1204 total 1250 clock 60.0Hz
1280x1024 (0xa6) 135.0MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz
1280x1024 (0xa7) 108.0MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1152x864 (0xa8) 108.0MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz
v: height 864 start 865 end 868 total 900 clock 75.0Hz
1024x768 (0xa9) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0xaa) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
800x600 (0xab) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0xac) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
640x480 (0xad) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0xae) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0xaf) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
## xrandr after second command ##
DVI-D-1 connected 1280x1024+1920+0 (normal left inverted right x axis y axis)
518mm x 324mm
1920x1200 60.0 +
1600x1200 60.0
1280x1024 75.0 60.0*
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
--
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
More information about the Nouveau
mailing list