[Nouveau] [Bug 39498] New: nouveau hangs on unresponsive black screen at startup

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=39498

           Summary: nouveau hangs on unresponsive black screen at startup
           Product: xorg
           Version: git
          Platform: Other
        OS/Version: Linux (All)
            Status: NEW
          Severity: blocker
          Priority: medium
         Component: Driver/nouveau
        AssignedTo: nouveau at lists.freedesktop.org
        ReportedBy: guido at trentalancia.com
         QAContact: xorg-team at lists.x.org


The Nouveau driver hangs on unresponsive black screen at startup (though it is
backlit).

None of ctrl-alt-del, ctrl-alt-fX works. The computer can only be rebooted by
pressing the power button.

I am using the Nouveau driver from git, libdrm from git and the nouveau kernel
module from version 2.6.39.3 (cannot try 3.0 yet, thus no out-of-tree git from
freedesktop either).

The card is an NVidia GeForce GT 330M. It should have Optmimus but with the
hardware mux (BIOS configured to "discrete" instead of "switchable").

The "nv" driver works fine. The binary NVidia driver also ends up with an
unresponsive black screen.

I have checked most (perhaps all) things on the Nouveau Troubleshooting page
without success.

I have tried with and without the "vga=775" option.

I am going to quote the output of lspci below and attach a few log files
(output of dmesg, Xorg.log and lsmod).

The log files collected without the vga=775 kernel option are divide the dmesg
output before and after starting X. The other two log files are obtained
without passing any "vga=" option at boot and should be similar.

01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 330M]
(rev a2) (prog-if 00 [VGA controller])
        Subsystem: Acer Incorporated [ALI] Device 035a
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 7
        Region 0: Memory at b2000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at a0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at b0000000 (64-bit, prefetchable) [size=32M]
        Region 5: I/O ports at 3000 [size=128]
        Expansion ROM at b3080000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [78] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 <64us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency
L0 <256ns, L1 <4us
                        ClockPM+ Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain-
CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB
        Capabilities: [b4] Vendor Specific Information: Len=14 <?>
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                        Status: NegoPending- InProgress-
        Capabilities: [128 v1] Power Budgeting <?>
        Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1
Len=024 <?>
        Kernel modules: nouveau, nvidiafb

-- 
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.