[Nouveau] [drm] nouveau Pointer to BIT loadval table invalid

gregor gl080572 at gmail.com
Thu Jul 28 07:52:58 PDT 2011


since a few day's i get the strange error during boot

[greglee at PSi_baLL ~]$ dmesg | grep invalid
[    0.722615] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    8.585707] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table
invalid   <<=======

the "drm" part refuses to load properly.... i followed procedure from
http://nouveau.freedesktop.org/wiki/Bugs


regards

Gregor Leemhuis
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20110728/54cb195c/attachment-0001.htm>
-------------- next part --------------
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-ARCH (tobias at T-POWA-LX) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 23 23:17:54 CEST 2011
[    0.000000] Command line: root=/dev/disk/by-uuid/97345204-d660-4ca2-a383-b940c80abf97 ro quiet    
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[    0.000000]  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bfd6f000 (usable)
[    0.000000]  BIOS-e820: 00000000bfd6f000 - 00000000bfdbf000 (reserved)
[    0.000000]  BIOS-e820: 00000000bfdbf000 - 00000000bfe82000 (usable)
[    0.000000]  BIOS-e820: 00000000bfe82000 - 00000000bfebf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfebf000 - 00000000bfeea000 (usable)
[    0.000000]  BIOS-e820: 00000000bfeea000 - 00000000bfeff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bfeff000 - 00000000bff00000 (usable)
[    0.000000]  BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Packard Bell     EasyNote LJ65   /EasyNote LJ65   , BIOS V2.09 02/08/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFF00000 mask FFFF00000 write-protect
[    0.000000]   1 base 0FFFC0000 mask FFFFE0000 uncachable
[    0.000000]   2 base 000000000 mask F80000000 write-back
[    0.000000]   3 base 080000000 mask FC0000000 write-back
[    0.000000]   4 base 0BFF00000 mask FFFF00000 uncachable
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xbff00 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bff00000
[    0.000000]  0000000000 - 00bfe00000 page 2M
[    0.000000]  00bfe00000 - 00bff00000 page 4k
[    0.000000] kernel direct mapping tables up to bff00000 @ bfee5000-bfeea000
[    0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[    0.000000]  0100000000 - 0140000000 page 2M
[    0.000000] kernel direct mapping tables up to 140000000 @ 13fffa000-140000000
[    0.000000] RAMDISK: 37dd8000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 00000000bfefe120 00064 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 00000000bfefd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT 00000000bfeec000 0BB87 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS 00000000bfe8f000 00040
[    0.000000] ACPI: HPET 00000000bfefc000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC 00000000bfefb000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG 00000000bfefa000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: ASF! 00000000bfef9000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SLIC 00000000bfef8000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: BOOT 00000000bfeeb000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SSDT 00000000bfeea000 00655 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000140000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[    0.000000]   NODE_DATA [000000013fffb000 - 000000013fffffff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00140000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[6] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000bfd6f
[    0.000000]     0: 0x000bfdbf -> 0x000bfe82
[    0.000000]     0: 0x000bfebf -> 0x000bfeea
[    0.000000]     0: 0x000bfeff -> 0x000bff00
[    0.000000]     0: 0x00100000 -> 0x00140000
[    0.000000] On node 0 totalpages: 1048044
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 767638 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 258560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bfd6f000 - 00000000bfdbf000
[    0.000000] PM: Registered nosave memory: 00000000bfe82000 - 00000000bfebf000
[    0.000000] PM: Registered nosave memory: 00000000bfeea000 - 00000000bfeff000
[    0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[    0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[    0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s78464 r8192 d23936 u524288
[    0.000000] pcpu-alloc: s78464 r8192 d23936 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1030119
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/disk/by-uuid/97345204-d660-4ca2-a383-b940c80abf97 ro quiet    
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4056492k/5242880k available (4061k kernel code, 1050704k absent, 135684k reserved, 3307k data, 712k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: PIT calibration matches HPET. 1 loops
[    0.000000] Detected 2194.495 MHz processor.
[    0.006670] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.86 BogoMIPS (lpj=7314983)
[    0.006674] pid_max: default: 32768 minimum: 301
[    0.006805] Security Framework initialized
[    0.006811] AppArmor: AppArmor disabled by boot time parameter
[    0.007209] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009626] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010823] Mount-cache hash table entries: 256
[    0.011276] Initializing cgroup subsys cpuacct
[    0.011312] Initializing cgroup subsys memory
[    0.011334] Initializing cgroup subsys devices
[    0.011336] Initializing cgroup subsys freezer
[    0.011339] Initializing cgroup subsys net_cls
[    0.011341] Initializing cgroup subsys blkio
[    0.011401] CPU: Physical Processor ID: 0
[    0.011403] CPU: Processor Core ID: 0
[    0.011405] mce: CPU supports 6 MCE banks
[    0.011413] CPU0: Thermal monitoring enabled (TM1)
[    0.011417] using mwait in idle threads.
[    0.012615] ACPI: Core revision 20110413
[    0.020014] ftrace: allocating 16143 entries in 64 pages
[    0.027054] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.060580] CPU0: Intel Pentium(R) Dual-Core CPU       T4400  @ 2.20GHz stepping 0a
[    0.063329] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.063329] ... version:                2
[    0.063329] ... bit width:              40
[    0.063329] ... generic registers:      2
[    0.063329] ... value mask:             000000ffffffffff
[    0.063329] ... max period:             000000007fffffff
[    0.063329] ... fixed-purpose events:   3
[    0.063329] ... event mask:             0000000700000003
[    0.080180] NMI watchdog enabled, takes one hw-pmu counter.
[    0.106676] Booting Node   0, Processors  #1
[    0.106679] smpboot cpu 1: start_ip = 99000
[    0.203352] NMI watchdog enabled, takes one hw-pmu counter.
[    0.209992] Brought up 2 CPUs
[    0.209994] Total of 2 processors activated (8781.73 BogoMIPS).
[    0.210950] devtmpfs: initialized
[    0.211276] PM: Registering ACPI NVS region at bfe82000 (249856 bytes)
[    0.211276] print_constraints: dummy: 
[    0.213333] NET: Registered protocol family 16
[    0.213467] ACPI: bus type pci registered
[    0.213637] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.213640] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.227315] PCI: Using configuration type 1 for base access
[    0.227775] bio: create slab <bio-0> at 0
[    0.228595] ACPI: EC: Look up EC in DSDT
[    0.231669] ACPI: Executed 1 blocks of module-level executable AML code
[    0.233018] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.233354] ACPI: SSDT 00000000bfd8dc98 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.233795] ACPI: Dynamic OEM Table Load:
[    0.233798] ACPI: SSDT           (null) 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.233929] ACPI: SSDT 00000000bfd8b598 00537 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.234356] ACPI: Dynamic OEM Table Load:
[    0.234358] ACPI: SSDT           (null) 00537 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.253556] ACPI: SSDT 00000000bfd8ce18 001CF (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.254009] ACPI: Dynamic OEM Table Load:
[    0.254012] ACPI: SSDT           (null) 001CF (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.263426] ACPI: SSDT 00000000bfd8df18 0008D (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.263863] ACPI: Dynamic OEM Table Load:
[    0.263866] ACPI: SSDT           (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.286715] ACPI: Interpreter enabled
[    0.286718] ACPI: (supports S0 S3 S4 S5)
[    0.286747] ACPI: Using IOAPIC for interrupt routing
[    0.491701] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.491923] ACPI: No dock devices found.
[    0.491925] HEST: Table not found.
[    0.491928] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.492189] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.492687] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.492690] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.492692] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.492696] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[    0.492710] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[    0.492734] DMAR: Forcing write-buffer flush capability
[    0.492736] DMAR: Disabling IOMMU for graphics on this chipset
[    0.492759] pci 0000:00:01.0: [8086:2a41] type 1 class 0x000604
[    0.492795] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.492798] pci 0000:00:01.0: PME# disabled
[    0.492844] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[    0.492901] pci 0000:00:1a.0: reg 20: [io  0x50e0-0x50ff]
[    0.492965] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[    0.493026] pci 0000:00:1a.1: reg 20: [io  0x50c0-0x50df]
[    0.493091] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[    0.493701] pci 0000:00:1a.7: reg 10: [mem 0xd9304c00-0xd9304fff]
[    0.498620] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.498625] pci 0000:00:1a.7: PME# disabled
[    0.498654] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[    0.498671] pci 0000:00:1b.0: reg 10: [mem 0xd9300000-0xd9303fff 64bit]
[    0.498731] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.498735] pci 0000:00:1b.0: PME# disabled
[    0.498757] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[    0.498817] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.498821] pci 0000:00:1c.0: PME# disabled
[    0.498844] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[    0.498905] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.498909] pci 0000:00:1c.1: PME# disabled
[    0.498931] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
[    0.498991] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.498995] pci 0000:00:1c.2: PME# disabled
[    0.499026] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[    0.499089] pci 0000:00:1d.0: reg 20: [io  0x50a0-0x50bf]
[    0.499153] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[    0.499216] pci 0000:00:1d.1: reg 20: [io  0x5080-0x509f]
[    0.499280] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[    0.499343] pci 0000:00:1d.2: reg 20: [io  0x5060-0x507f]
[    0.499401] pci 0000:00:1d.3: [8086:2939] type 0 class 0x000c03
[    0.499462] pci 0000:00:1d.3: reg 20: [io  0x5040-0x505f]
[    0.499530] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[    0.500367] pci 0000:00:1d.7: reg 10: [mem 0xd9304800-0xd9304bff]
[    0.504890] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.504895] pci 0000:00:1d.7: PME# disabled
[    0.504917] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.504979] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
[    0.505099] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[    0.505120] pci 0000:00:1f.2: reg 10: [io  0x5108-0x510f]
[    0.505129] pci 0000:00:1f.2: reg 14: [io  0x5114-0x5117]
[    0.505138] pci 0000:00:1f.2: reg 18: [io  0x5100-0x5107]
[    0.505147] pci 0000:00:1f.2: reg 1c: [io  0x5110-0x5113]
[    0.505156] pci 0000:00:1f.2: reg 20: [io  0x5020-0x503f]
[    0.505165] pci 0000:00:1f.2: reg 24: [mem 0xd9304000-0xd93047ff]
[    0.505202] pci 0000:00:1f.2: PME# supported from D3hot
[    0.505206] pci 0000:00:1f.2: PME# disabled
[    0.505225] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[    0.505241] pci 0000:00:1f.3: reg 10: [mem 0xd9305000-0xd93050ff 64bit]
[    0.505265] pci 0000:00:1f.3: reg 20: [io  0x5000-0x501f]
[    0.505345] pci 0000:01:00.0: [10de:0a74] type 0 class 0x000300
[    0.505362] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[    0.505380] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.505398] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.505410] pci 0000:01:00.0: reg 24: [io  0x4000-0x407f]
[    0.505422] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[    0.505501] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[    0.505517] pci 0000:01:00.1: reg 10: [mem 0xd3000000-0xd3003fff]
[    0.509994] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.509998] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.510001] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd30fffff]
[    0.510006] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.510050] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.510054] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.510058] pci 0000:00:1c.0:   bridge window [mem 0xd8300000-0xd92fffff]
[    0.510064] pci 0000:00:1c.0:   bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[    0.510127] pci 0000:04:00.0: [168c:002a] type 0 class 0x000280
[    0.510151] pci 0000:04:00.0: reg 10: [mem 0xd7200000-0xd720ffff 64bit]
[    0.510245] pci 0000:04:00.0: supports D1
[    0.510247] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[    0.510253] pci 0000:04:00.0: PME# disabled
[    0.510279] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.510290] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[    0.510293] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.510297] pci 0000:00:1c.1:   bridge window [mem 0xd7200000-0xd82fffff]
[    0.510304] pci 0000:00:1c.1:   bridge window [mem 0xd4100000-0xd50fffff 64bit pref]
[    0.510374] pci 0000:05:00.0: [14e4:1698] type 0 class 0x000200
[    0.510400] pci 0000:05:00.0: reg 10: [mem 0xd6100000-0xd610ffff 64bit]
[    0.510507] pci 0000:05:00.0: PME# supported from D3hot D3cold
[    0.510513] pci 0000:05:00.0: PME# disabled
[    0.516649] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[    0.516653] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.516657] pci 0000:00:1c.2:   bridge window [mem 0xd6100000-0xd71fffff]
[    0.516663] pci 0000:00:1c.2:   bridge window [mem 0xd5100000-0xd60fffff 64bit pref]
[    0.516730] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[    0.516734] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.516738] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.516745] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.516747] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.516750] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.516752] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.516755] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    0.516779] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.516934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.517006] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.517046] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.517084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[    0.517140]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.517143]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.517145] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.521512] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.521571] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[    0.521623] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.521673] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.521724] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.521776] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[    0.521826] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[    0.521876] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[    0.522011] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.522015] vgaarb: loaded
[    0.522016] vgaarb: bridge control possible 0000:01:00.0
[    0.522109] PCI: Using ACPI for IRQ routing
[    0.523819] PCI: pci_cache_line_size set to 64 bytes
[    0.523922] reserve RAM buffer: 000000000009e000 - 000000000009ffff 
[    0.523925] reserve RAM buffer: 00000000bfd6f000 - 00000000bfffffff 
[    0.523927] reserve RAM buffer: 00000000bfe82000 - 00000000bfffffff 
[    0.523930] reserve RAM buffer: 00000000bfeea000 - 00000000bfffffff 
[    0.523932] reserve RAM buffer: 00000000bff00000 - 00000000bfffffff 
[    0.524077] NetLabel: Initializing
[    0.524079] NetLabel:  domain hash size = 128
[    0.524080] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.524096] NetLabel:  unlabeled traffic allowed by default
[    0.524112] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.524117] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.524122] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.533316] Switching to clocksource hpet
[    0.536539] Switched to NOHz mode on CPU #0
[    0.536609] Switched to NOHz mode on CPU #1
[    0.541144] pnp: PnP ACPI init
[    0.541166] ACPI: bus type pnp registered
[    0.541466] pnp 00:00: [bus 00-ff]
[    0.541469] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.541471] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.541473] pnp 00:00: [io  0x0d00-0xffff window]
[    0.541476] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.541478] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.541480] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.541482] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.541484] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.541486] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.541488] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.541490] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.541496] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.541498] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.541500] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.541502] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.541504] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.541506] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.541508] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[    0.541510] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.541637] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.640135] pnp 00:01: [io  0x002e-0x002f]
[    0.640138] pnp 00:01: [io  0x004e-0x004f]
[    0.640140] pnp 00:01: [io  0x164e-0x164f]
[    0.640141] pnp 00:01: [io  0x0061]
[    0.640143] pnp 00:01: [io  0x0070]
[    0.640145] pnp 00:01: [io  0x0080]
[    0.640146] pnp 00:01: [io  0x0092]
[    0.640148] pnp 00:01: [io  0x00b2-0x00b3]
[    0.640150] pnp 00:01: [io  0x0063]
[    0.640152] pnp 00:01: [io  0x0065]
[    0.640153] pnp 00:01: [io  0x0067]
[    0.640155] pnp 00:01: [io  0x0600-0x060f]
[    0.640157] pnp 00:01: [io  0x0610]
[    0.640158] pnp 00:01: [io  0x0800-0x080f]
[    0.640160] pnp 00:01: [io  0x0810-0x0817]
[    0.640162] pnp 00:01: [io  0x0820-0x0823]
[    0.640164] pnp 00:01: [io  0x0400-0x047f]
[    0.640165] pnp 00:01: [io  0x0500-0x057f]
[    0.640167] pnp 00:01: [io  0x0068]
[    0.640169] pnp 00:01: [io  0x006c]
[    0.640170] pnp 00:01: [io  0xff2c-0xff2f]
[    0.640173] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[    0.640174] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.640176] pnp 00:01: [mem 0xfed10000-0xfed13fff]
[    0.640178] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.640180] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.640182] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    0.640184] pnp 00:01: [mem 0xfed20000-0xfed8ffff]
[    0.640186] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.640217] pnp 00:01: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io  0x1000-0x1fff]
[    0.640299] system 00:01: [io  0x0600-0x060f] has been reserved
[    0.640305] system 00:01: [io  0x0610] has been reserved
[    0.640308] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.640310] system 00:01: [io  0x0810-0x0817] has been reserved
[    0.640313] system 00:01: [io  0x0820-0x0823] has been reserved
[    0.640315] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.640318] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.640321] system 00:01: [io  0xff2c-0xff2f] has been reserved
[    0.640325] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.640328] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.640331] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.640333] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.640336] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.640339] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.640342] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.640344] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.640348] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.640358] pnp 00:02: [io  0x0000-0x001f]
[    0.640360] pnp 00:02: [io  0x0081-0x0091]
[    0.640361] pnp 00:02: [io  0x0093-0x009f]
[    0.640363] pnp 00:02: [io  0x00c0-0x00df]
[    0.640368] pnp 00:02: [dma 4]
[    0.640399] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.640422] pnp 00:03: [io  0x0070-0x0077]
[    0.640452] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.640512] pnp 00:04: [irq 0 disabled]
[    0.640522] pnp 00:04: [irq 8]
[    0.640524] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.640556] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.640566] pnp 00:05: [io  0x00f0]
[    0.640571] pnp 00:05: [irq 13]
[    0.640602] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.640612] pnp 00:06: [mem 0xfff00000-0xffffffff]
[    0.640647] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[    0.640676] pnp 00:07: [io  0x0060]
[    0.640678] pnp 00:07: [io  0x0064]
[    0.640683] pnp 00:07: [irq 1]
[    0.640717] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.640780] pnp 00:08: [irq 12]
[    0.640817] pnp 00:08: Plug and Play ACPI device, IDs SYN1b16 SYN1b00 SYN0002 PNP0f13 (active)
[    0.640978] pnp: PnP ACPI: found 9 devices
[    0.640980] ACPI: ACPI bus type pnp unregistered
[    0.647262] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[    0.647270] PCI: max bus depth: 1 pci_try_num: 2
[    0.647312] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
[    0.647316] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.647319] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.647323] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd30fffff]
[    0.647326] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.647331] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.647334] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.647339] pci 0000:00:1c.0:   bridge window [mem 0xd8300000-0xd92fffff]
[    0.647343] pci 0000:00:1c.0:   bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[    0.647350] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[    0.647353] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.647358] pci 0000:00:1c.1:   bridge window [mem 0xd7200000-0xd82fffff]
[    0.647362] pci 0000:00:1c.1:   bridge window [mem 0xd4100000-0xd50fffff 64bit pref]
[    0.647369] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[    0.647371] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.647377] pci 0000:00:1c.2:   bridge window [mem 0xd6100000-0xd71fffff]
[    0.647381] pci 0000:00:1c.2:   bridge window [mem 0xd5100000-0xd60fffff 64bit pref]
[    0.647387] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[    0.647389] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.647394] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.647398] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.647414] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.647419] pci 0000:00:01.0: setting latency timer to 64
[    0.647424] pci 0000:00:1c.0: enabling device (0001 -> 0003)
[    0.647431] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.647436] pci 0000:00:1c.0: setting latency timer to 64
[    0.647443] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.647447] pci 0000:00:1c.1: setting latency timer to 64
[    0.647455] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.647459] pci 0000:00:1c.2: setting latency timer to 64
[    0.647466] pci 0000:00:1e.0: setting latency timer to 64
[    0.647470] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.647472] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.647474] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.647477] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[    0.647479] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.647481] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[    0.647483] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.647486] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.647488] pci_bus 0000:02: resource 1 [mem 0xd8300000-0xd92fffff]
[    0.647490] pci_bus 0000:02: resource 2 [mem 0xd3100000-0xd40fffff 64bit pref]
[    0.647493] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.647495] pci_bus 0000:04: resource 1 [mem 0xd7200000-0xd82fffff]
[    0.647497] pci_bus 0000:04: resource 2 [mem 0xd4100000-0xd50fffff 64bit pref]
[    0.647499] pci_bus 0000:05: resource 0 [io  0x1000-0x1fff]
[    0.647501] pci_bus 0000:05: resource 1 [mem 0xd6100000-0xd71fffff]
[    0.647504] pci_bus 0000:05: resource 2 [mem 0xd5100000-0xd60fffff 64bit pref]
[    0.647506] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    0.647509] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    0.647511] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    0.647513] pci_bus 0000:06: resource 7 [mem 0xc0000000-0xfebfffff]
[    0.647596] NET: Registered protocol family 2
[    0.647801] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.649145] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.653668] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.654202] TCP: Hash tables configured (established 524288 bind 65536)
[    0.654206] TCP reno registered
[    0.654225] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.654266] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.654594] NET: Registered protocol family 1
[    0.680055] pci 0000:01:00.0: Boot video device
[    0.680079] PCI: CLS 64 bytes, default 64
[    0.680135] Unpacking initramfs...
[    0.711607] Freeing initrd memory: 2144k freed
[    0.712580] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.712584] Placing 64MB software IO TLB between ffff8800bbd6f000 - ffff8800bfd6f000
[    0.712586] software IO TLB at phys 0xbbd6f000 - 0xbfd6f000
[    0.712611] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.712613] Simple Boot Flag at 0x44 set to 0x1
[    0.713022] audit: initializing netlink socket (disabled)
[    0.713034] type=2000 audit(1311857642.709:1): initialized
[    0.724157] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.749068] VFS: Disk quotas dquot_6.5.2
[    0.749217] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.749387] msgmni has been set to 7927
[    0.749622] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.749660] io scheduler noop registered
[    0.749662] io scheduler deadline registered
[    0.749713] io scheduler cfq registered (default)
[    0.749826] pcieport 0000:00:01.0: setting latency timer to 64
[    0.749858] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.749912] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.749957] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.750044] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.750089] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.750156] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.750201] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[    0.750358] intel_idle: MWAIT substates: 0x2220
[    0.750360] intel_idle: does not run on family 6 model 23
[    0.750365] ERST: Table is not found!
[    0.750436] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.866998] Linux agpgart interface v0.103
[    0.867086] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    0.898807] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.898844] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.898931] mousedev: PS/2 mouse device common for all mice
[    0.902080] rtc_cmos 00:03: RTC can wake from S4
[    0.902194] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.902223] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.902233] cpuidle: using governor ladder
[    0.902235] cpuidle: using governor menu
[    0.902482] TCP cubic registered
[    0.902485] NET: Registered protocol family 17
[    0.902497] Registering the dns_resolver key type
[    0.902597] PM: Hibernation image not present or could not be loaded.
[    0.902603] registered taskstats version 1
[    0.913763] rtc_cmos 00:03: setting system clock to 2011-07-28 12:54:03 UTC (1311857643)
[    0.913815] Initializing network drop monitor service
[    0.915153] Freeing unused kernel memory: 712k freed
[    0.915322] Write protecting the kernel read-only data: 6144k
[    0.915479] Freeing unused kernel memory: 16k freed
[    0.918178] Freeing unused kernel memory: 776k freed
[    0.932676] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.935693] udevd[54]: starting version 172
[    1.033509] usbcore: registered new interface driver usbfs
[    1.033539] usbcore: registered new interface driver hub
[    1.034011] SCSI subsystem initialized
[    1.044381] usbcore: registered new device driver usb
[    1.044456] libata version 3.00 loaded.
[    1.048997] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.049041] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[    1.049079] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.049084] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.049135] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.049177] ehci_hcd 0000:00:1a.7: debug port 1
[    1.053060] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    1.053086] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xd9304c00
[    1.066690] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.066846] hub 1-0:1.0: USB hub found
[    1.066851] hub 1-0:1.0: 4 ports detected
[    1.066951] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.066987] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.066991] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.067001] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.067036] ehci_hcd 0000:00:1d.7: debug port 1
[    1.070910] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.070929] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd9304800
[    1.083348] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.083480] hub 2-0:1.0: USB hub found
[    1.083485] hub 2-0:1.0: 8 ports detected
[    1.083585] ahci 0000:00:1f.2: version 3.0
[    1.083601] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.083649] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    1.083698] ahci: SSS flag set, parallel bus scan disabled
[    1.083735] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.083738] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems sxs 
[    1.083743] ahci 0000:00:1f.2: setting latency timer to 64
[    1.103946] scsi0 : ahci
[    1.104049] scsi1 : ahci
[    1.104115] scsi2 : ahci
[    1.104178] scsi3 : ahci
[    1.104247] scsi4 : ahci
[    1.104311] scsi5 : ahci
[    1.104516] ata1: SATA max UDMA/133 abar m2048 at 0xd9304000 port 0xd9304100 irq 44
[    1.104520] ata2: SATA max UDMA/133 abar m2048 at 0xd9304000 port 0xd9304180 irq 44
[    1.104522] ata3: DUMMY
[    1.104523] ata4: DUMMY
[    1.104526] ata5: SATA max UDMA/133 abar m2048 at 0xd9304000 port 0xd9304300 irq 44
[    1.104529] ata6: SATA max UDMA/133 abar m2048 at 0xd9304000 port 0xd9304380 irq 44
[    1.145229] uhci_hcd: USB Universal Host Controller Interface driver
[    1.145288] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.145299] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.145304] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.145424] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.145470] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000050e0
[    1.145630] hub 3-0:1.0: USB hub found
[    1.145635] hub 3-0:1.0: 2 ports detected
[    1.145708] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.145716] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.145719] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.145729] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.145756] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050c0
[    1.145886] hub 4-0:1.0: USB hub found
[    1.145890] hub 4-0:1.0: 2 ports detected
[    1.145957] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.145963] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.145967] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.145974] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.146001] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
[    1.146123] hub 5-0:1.0: USB hub found
[    1.146127] hub 5-0:1.0: 2 ports detected
[    1.146193] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.146200] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.146203] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.146211] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.146247] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
[    1.146371] hub 6-0:1.0: USB hub found
[    1.146375] hub 6-0:1.0: 2 ports detected
[    1.146442] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[    1.146448] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.146451] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.146458] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.146485] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00005060
[    1.146608] hub 7-0:1.0: USB hub found
[    1.146612] hub 7-0:1.0: 2 ports detected
[    1.146706] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.146714] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.146717] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.146725] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    1.146762] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040
[    1.146888] hub 8-0:1.0: USB hub found
[    1.146892] hub 8-0:1.0: 2 ports detected
[    1.533354] usb 2-4: new high speed USB device number 3 using ehci_hcd
[    1.590018] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.633202] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
[    1.633205] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.635390] ata1.00: configured for UDMA/133
[    1.635584] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
[    1.713372] Refined TSC clocksource calibration: 2194.499 MHz.
[    1.713379] Switching to clocksource tsc
[    1.923345] usb 3-1: new low speed USB device number 2 using uhci_hcd
[    2.115836] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input1
[    2.115906] generic-usb 0003:062A:0201.0001: input,hidraw0: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:1a.0-1/input0
[    2.120022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.120294] ata2.00: ATAPI: Optiarc DVD RW AD-7585H, KX04, max UDMA/100
[    2.120960] ata2.00: configured for UDMA/100
[    2.122892] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7585H  KX04 PQ: 0 ANSI: 5
[    2.144031] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input2
[    2.144270] generic-usb 0003:062A:0201.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:1a.0-1/input1
[    2.144294] usbcore: registered new interface driver usbhid
[    2.144297] usbhid: USB HID core driver
[    2.313345] usb 5-1: new full speed USB device number 2 using uhci_hcd
[    2.440018] ata5: SATA link down (SStatus 0 SControl 300)
[    2.495506] input: MLK USB Multi-Smart Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input3
[    2.495608] generic-usb 0003:04FC:0801.0003: input,hidraw2: USB HID v1.11 Mouse [MLK USB Multi-Smart Mouse] on usb-0000:00:1d.0-1/input0
[    2.760018] ata6: SATA link down (SStatus 0 SControl 300)
[    2.770634] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.770697] sd 0:0:0:0: [sda] Write Protect is off
[    2.770700] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.770725] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.772436] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.772440] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.772703] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.807587]  sda: sda1 sda2 sda3 sda4
[    2.807985] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.430849] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    5.345593] udevd[269]: starting version 172
[    5.723808] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input4
[    5.723816] ACPI: Power Button [PWRB]
[    5.723867] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input5
[    5.723915] ACPI: Lid Switch [LID0]
[    5.723957] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0E:00/input/input6
[    5.723961] ACPI: Sleep Button [SLPB]
[    5.724034] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    5.724037] ACPI: Power Button [PWRF]
[    5.892504] ACPI: acpi_idle registered with cpuidle
[    5.897830] Monitor-Mwait will be used to enter C-1 state
[    5.901691] Monitor-Mwait will be used to enter C-2 state
[    5.901717] Marking TSC unstable due to TSC halts in idle
[    5.904867] Switching to clocksource hpet
[    5.936699] thermal LNXTHERM:00: registered as thermal_zone0
[    5.936702] ACPI: Thermal Zone [TZ01] (28 C)
[    6.056749] acpi device:03: registered as cooling_device2
[    6.056893] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[    6.056902] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    6.081364] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    6.081821] ACPI: AC Adapter [AC] (off-line)
[    6.225312] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    6.335504] wmi: Mapper loaded
[    6.430931] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.430982] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    6.450635] cfg80211: Calling CRDA to update world regulatory domain
[    6.530355] iTCO_vendor_support: vendor-support=0
[    7.630129] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    7.630139] ACPI: Battery Slot [BAT0] (battery present)
[    7.667888] Linux media interface: v0.10
[    7.685547] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[    7.685921] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[    7.686003] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.703748] acer_wmi: Acer Laptop ACPI-WMI Extras
[    7.704397] acer_wmi: Brightness must be controlled by generic video driver
[    7.841469] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    7.841671] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    7.841702] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    7.896444] tg3.c:v3.119 (May 18, 2011)
[    7.896467] tg3 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    7.896478] tg3 0000:05:00.0: setting latency timer to 64
[    7.963363] Linux video capture interface: v2.00
[    7.987649] tg3 0000:05:00.0: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 70:5a:b6:db:0e:7b
[    7.987654] tg3 0000:05:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    7.987657] tg3 0000:05:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    7.987660] tg3 0000:05:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    8.006071] hda_codec: ALC272X: BIOS auto-probing.
[    8.007006] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[    8.009400] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.009467] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    8.009607] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    8.009993] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.010038] hda_intel: Disabling MSI
[    8.010471] HDA Intel 0000:01:00.1: setting latency timer to 64
[    8.013111] uvcvideo: Found UVC 1.00 device Video WebCam (064e:a103)
[    8.015737] ath9k 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.015752] ath9k 0000:04:00.0: setting latency timer to 64
[    8.020316] [drm] Initialized drm 1.1.0 20060810
[    8.031344] input: Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input13
[    8.031411] usbcore: registered new interface driver uvcvideo
[    8.031413] USB Video Class driver (v1.1.0)
[    8.076387] MXM: GUID detected in BIOS
[    8.457060] ath: EEPROM regdomain: 0x65
[    8.457063] ath: EEPROM indicates we should expect a direct regpair map
[    8.457067] ath: Country alpha2 being used: 00
[    8.457068] ath: Regpair used: 0x65
[    8.506713] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[    8.535626] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[    8.535927] Registered led device: ath9k-phy0
[    8.535936] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900050e0000, irq=17
[    8.583360] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[    8.656713] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[    8.730404] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[    8.843592] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    8.843670] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    8.843735] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[    8.843798] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[    8.845056] nouveau 0000:01:00.0: power state changed by ACPI to D0
[    8.845068] nouveau 0000:01:00.0: power state changed by ACPI to D0
[    8.845080] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.845092] nouveau 0000:01:00.0: setting latency timer to 64
[    8.847847] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8a00a2)
[    8.858197] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[    8.973762] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    8.973768] [drm] nouveau 0000:01:00.0: BIT BIOS found
[    8.973771] [drm] nouveau 0000:01:00.0: Bios version 70.18.3a.00
[    8.973774] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[    8.973860] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[    8.973863] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[    8.973866] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000313 00010034
[    8.973869] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 08014382 00020010
[    8.973871] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02049300 00000000
[    8.973875] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[    8.973878] [drm] nouveau 0000:01:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
[    8.973881] [drm] nouveau 0000:01:00.0:   1: 0x00001161: type 0x61 idx 1 tag 0x07
[    8.973884] [drm] nouveau 0000:01:00.0:   2: 0x00001231: type 0x31 idx 2 tag 0x07
[    8.973886] [drm] nouveau 0000:01:00.0:   3: 0x01000331: type 0x31 idx 3 tag 0x5e
[    8.973889] [drm] nouveau 0000:01:00.0:   4: 0x01000461: type 0x61 idx 4 tag 0x5e
[    8.973891] [drm] nouveau 0000:01:00.0:   5: 0x02000546: type 0x46 idx 5 tag 0x5f
[    8.973894] [drm] nouveau 0000:01:00.0:   6: 0x00010631: type 0x31 idx 6 tag 0x51
[    8.973896] [drm] nouveau 0000:01:00.0:   7: 0x00010746: type 0x46 idx 7 tag 0x51
[    8.973899] [drm] nouveau 0000:01:00.0:   8: 0x00020846: type 0x46 idx 8 tag 0x52
[    8.973901] [drm] nouveau 0000:01:00.0:   9: 0x00000900: type 0x00 idx 9 tag 0xff
[    8.973913] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDCA2
[    9.019484] [drm] nouveau 0000:01:00.0: 0xDF33: Condition still not met after 20ms, skipping following opcodes
[    9.044772] [drm] nouveau 0000:01:00.0: 0xDF37: Condition still not met after 20ms, skipping following opcodes
[    9.069549] [drm] nouveau 0000:01:00.0: 0xE0CA: Condition still not met after 20ms, skipping following opcodes
[    9.069558] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE0F7
[    9.080378] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEC16
[    9.080393] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEC2F
[    9.249197] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xED35
[    9.249200] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xED9A
[    9.272280] [drm] nouveau 0000:01:00.0: 0xDB16: Condition still not met after 20ms, skipping following opcodes
[    9.302978] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[    9.302984] [drm] nouveau 0000:01:00.0: 0: memory 135MHz core 135MHz shader 270MHz voltage 850mV timing 2
[    9.302988] [drm] nouveau 0000:01:00.0: 1: memory 405MHz core 405MHz shader 810MHz voltage 850mV timing 1
[    9.302992] [drm] nouveau 0000:01:00.0: 3: memory 790MHz core 606MHz shader 1468MHz voltage 1000mV timing 0
[    9.303020] [drm] nouveau 0000:01:00.0: c: memory 405MHz core 405MHz shader 810MHz voltage 850mV
[    9.303197] [TTM] Zone  kernel: Available graphics memory: 2030070 kiB.
[    9.303199] [TTM] Initializing pool allocator.
[    9.303222] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[    9.306513] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[    9.342451] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[    9.343795] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    9.343798] [drm] No driver support for vblank timestamp query.
[    9.371271] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000
[    9.484534] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input18
[    9.529833] [drm] nouveau 0000:01:00.0: allocated 1600x900 fb: 0x40000000, bo ffff880137a60800
[    9.529917] fbcon: nouveaufb (fb0) is primary device
[   10.855333] Console: switching to colour frame buffer device 200x56
[   10.857565] fb0: nouveaufb frame buffer device
[   10.857567] drm: registered panic notifier
[   10.857574] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[   10.973132] usbcore: registered new interface driver snd-usb-audio
[   11.028601] loop: module loaded
[   11.056904] fuse init (API version 7.16)
[   12.398019] EXT4-fs (sda4): re-mounted. Opts: (null)
[   17.764513] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   18.165798] ip_tables: (C) 2000-2006 Netfilter Core Team
[   28.975536] Netfilter messages via NETLINK v0.30.
[   29.495131] tg3 0000:05:00.0: irq 46 for MSI/MSI-X
[   34.718864] tg3 0000:05:00.0: PME# enabled
[   34.718881] pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
[   34.753440] tg3 0000:05:00.0: irq 46 for MSI/MSI-X
[   38.491683] wlan0: authenticate with 00:19:5b:57:29:db (try 1)
[   38.494905] wlan0: authenticated
[   38.494930] wlan0: associate with 00:19:5b:57:29:db (try 1)
[   38.505436] wlan0: RX AssocResp from 00:19:5b:57:29:db (capab=0x431 status=0 aid=3)
[   38.505440] wlan0: associated
[  298.984722] chromium-sandbo (10674): /proc/10672/oom_adj is deprecated, please use /proc/10672/oom_score_adj instead.


More information about the Nouveau mailing list