[Nouveau] [Bug 57034] [NVA0] [Quadro FX 4800] display port connectors not recognized

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=57034

--- Comment #2 from Orion Poplawski <orion at cora.nwra.com> ---
Things are looking better with 3.10.9:

$ ls /sys/class/drm/card*-*/status
/sys/class/drm/card0-DP-1/status  /sys/class/drm/card0-DP-2/status 
/sys/class/drm/card0-DVI-I-1/status
$ cat /sys/class/drm/card*-*/status
connected
connected
disconnected

But I'm not getting any output on DP-2 - monitor is in power save but I don't
know why.

$ xrandr
Screen 0: minimum 320 x 200, current 3200 x 1200, maximum 8192 x 8192
DVI-I-1 disconnected (normal left inverted right x axis y axis)
DP-1 connected primary 1600x1200+0+0 (normal left inverted right x axis y axis)
367mm x 275mm
   1600x1200      60.0*+
   1280x1024      75.0     60.0
   1152x864       75.0
   1024x768       75.1     60.0
   800x600        75.0     60.3
   640x480        75.0     60.0
   720x400        70.1
DP-2 connected 1600x1200+1600+0 (normal left inverted right x axis y axis)
367mm x 275mm
   1600x1200      60.0*+
   1280x1024      75.0     60.0
   1152x864       75.0
   1024x768       75.1     60.0
   800x600        75.0     60.3
   640x480        75.0     60.0
   720x400        70.1

-- 
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20130826/14575006/attachment.html>