[Nouveau] [Bug 63481] [NV1A] No monitor signal since commit ebb945a94 (3.7-rc1)

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=63481

Claudio Laurita <claudio.laurita at integrazionetotale.it> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|RESOLVED                    |REOPENED
         Resolution|FIXED                       |---

--- Comment #5 from Claudio Laurita <claudio.laurita at integrazionetotale.it> ---
I'm experiencing the same problem on a debian kernel 3.11-0.bpo.2-486.
(I think it could be the same)
These are the relevant lines in Xorg.0.log

[    21.460] (II) NOUVEAU driver Date:   Thu Nov 7 14:56:48 2013 +1000
[    21.460] (II) NOUVEAU driver for NVIDIA chipset families :
[    21.467] (--) NOUVEAU(0): Chipset: "NVIDIA NV1A"
[    21.467] (II) NOUVEAU(0): Creating default Display subsection in Screen
section
[    21.467] (==) NOUVEAU(0): Depth 16, (--) framebuffer bpp 16
[    21.467] (==) NOUVEAU(0): RGB weight 565
[    21.467] (==) NOUVEAU(0): Default visual is TrueColor
[    21.467] (==) NOUVEAU(0): Using HW cursor
[    21.467] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[    21.467] (==) NOUVEAU(0): Page flipping enabled
[    21.467] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[    21.590] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    21.690] (II) NOUVEAU(0): EDID for output DVI-I-1
[    21.690] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[    21.690] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184
1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    21.690] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056
 600 601 605 628 +hsync +vsync (37.9 kHz e)
[    21.690] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024
 600 601 603 625 +hsync +vsync (35.2 kHz e)
[    21.690] (II) NOUVEAU(0): Modeline "848x480"x60.0   33.75  848 864 976 1088
 480 486 494 517 +hsync +vsync (31.0 kHz e)
[    21.690] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800 
480 489 492 525 -hsync -vsync (31.5 kHz e)
[    21.690] (II) NOUVEAU(0): Output DVI-I-1 connected
[    21.690] (II) NOUVEAU(0): Using exact sizes for initial modes
[    21.690] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1024x768
[    21.690] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[    21.690] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[    21.690] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from
0.0 MHz), 48.4 kHz, 60.0 Hz
[    21.690] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184
1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    21.690] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0
MHz), 37.9 kHz, 60.3 Hz
[    21.690] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056
 600 601 605 628 +hsync +vsync (37.9 kHz e)
[    21.690] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0
MHz), 35.2 kHz, 56.2 Hz
[    21.690] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024
 600 601 603 625 +hsync +vsync (35.2 kHz e)
[    21.690] (**) NOUVEAU(0):  Driver mode "848x480": 33.8 MHz (scaled from 0.0
MHz), 31.0 kHz, 60.0 Hz
[    21.691] (II) NOUVEAU(0): Modeline "848x480"x60.0   33.75  848 864 976 1088
 480 486 494 517 +hsync +vsync (31.0 kHz e)
[    21.691] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0
MHz), 31.5 kHz, 59.9 Hz
[    21.691] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800 
480 489 492 525 -hsync -vsync (31.5 kHz e)
[    21.691] (==) NOUVEAU(0): DPI set to (96, 96)
[    21.720] (II) NOUVEAU(0): Opened GPU channel 0
[    21.732] (II) NOUVEAU(0): [DRI2] Setup complete
[    21.732] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau_vieux
[    21.732] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau_vieux
[    21.801] (==) NOUVEAU(0): Backing store disabled
[    21.801] (==) NOUVEAU(0): Silken mouse enabled
[    21.803] (==) NOUVEAU(0): DPMS enabled
[    21.803] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[    22.934] (II) NOUVEAU(0): NVEnterVT is called.
[    22.955] (II) NOUVEAU(0): Setting screen physical size to 270 x 203

The monitor is driven with wrong frequencies (as stated by an osd message).
The strange is that the monitor is connected to a VGA, not DVI (no DVI is
present at all)

Tell me if I can help someway
Thank you
Claudio

-- 
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20131211/2d896f3f/attachment.html>