[Nouveau] [Bug 43939] [NV96] monitor connected via HDMI->DVI adapter is blank / standby (9500GS)

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=43939

--- Comment #17 from shade <shade.poczta at gmail.com> ---
I was thinking about adding a bug, but i found this. Looks like i could have a
small clue or it is just in my case.

I have standard HDMI cable, and my screen is black after grub, but monitor have
signal all the time. I found that i need to force monitor to check again for
signal settings, aka change zoom in/hdmi overscan (in monitor device settings
using pilot/buttons on it) or something simular and then all shows up. After
every restart or changing monitor input from hdmi to other and again to hdmi it
brakes again. I wasn't sure if that wasn't my monitor problem but this bug
looks same and its about hdmi output signal. Every log dmesg/xorg/others does
not show any problems also.

Changing resolution or other settings with xrandr does not affect information
showed by monitor info section (all time shows full hd at 60Hz) even if xrandr
says its set to other.

I got:
3.11.5 kernel (same on 3.11.6)
xorg 1.14.3 (same on live trunk from today)
nouveau 1.0.9 (same on live trunk from today)

Hardware:
GFX 950 TI Boost aka NVE6

-- 
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20131027/f7be2059/attachment.html>