[Nouveau] Problem with GT218 (GeForce GT210)

Andre Campos Rodovalho andre.rodovalho at gmail.com
Mon Jun 8 11:43:29 PDT 2015


Hello, I'm facing issues with a Point of View GT210/218 and nouveau
drivers. I'm using ubuntu server with LXDE on top of it...

*lshw -c video* output:
*-display
       description: VGA compatible controller
       product: GT218 [GeForce 210]
       vendor: NVIDIA Corporation
       physical id: 0
       bus info: pci at 0000:01:00.0
       version: a2
       width: 64 bits
       clock: 33MHz
       capabilities: vga_controller bus_master cap_list rom
       configuration: driver=nouveau latency=0
       resources: irq:82 memory:fd000000-fdffffff memory:d0000000-d7ffffff
memory:d8000000-d9ffffff ioport:e000(size=128) memory:fe000000-fe07ffff

*modeinfo nouveau *output:
filename:
/lib/modules/3.16.0-38-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko
license:        GPL and additional rights
description:    nVidia Riva/TNT/GeForce/Quadro/Tesla
author:         Nouveau Project
srcversion:     D0FCF627599F97CE5A4C810
alias:          pci:v000012D2d*sv*sd*bc03sc*i*
alias:          pci:v000010DEd*sv*sd*bc03sc*i*
depends:        drm,drm_kms_helper,ttm,mxm-wmi,wmi,video,i2c-algo-bit
intree:         Y
vermagic:       3.16.0-38-generic SMP mod_unload modversions
signer:         Magrathea: Glacier signing key
sig_key:        C2:84:ED:AC:CF:0B:47:36:52:C3:4D:23:BE:C3:56:94:42:36:E6:3B
sig_hashalgo:   sha512
parm:           tv_norm:Default TV norm.
Supported: PAL, PAL-M, PAL-N, PAL-Nc, NTSC-M, NTSC-J,
hd480i, hd480p, hd576i, hd576p, hd720p, hd1080i.
Default: PAL
*NOTE* Ignored for cards with external TV encoders. (charp)
parm:           tv_disable:Disable TV-out detection (int)
parm:           ignorelid:Ignore ACPI lid status (int)
parm:           duallink:Allow dual-link TMDS (default: enabled) (int)
parm:           nofbaccel:Disable fbcon acceleration (int)
parm:           agpmode:AGP mode (0 to disable AGP) (int)
parm:           vram_pushbuf:Create DMA push buffers in VRAM (int)
parm:           config:option string to pass to driver core (charp)
parm:           debug:debug string to pass to driver core (charp)
parm:           noaccel:disable kernel/abi16 acceleration (int)
parm:           modeset:enable driver (default: auto, 0 = disabled, 1 =
enabled, 2 = headless) (int)
parm:           runpm:disable (0), force enable (1), optimus only default
(-1) (int)

I need to boot with nomodeset to see something on this machine. But the
most wierd is that I have a very similar machine with almost the same video
card and I have no problems to use it. The installation is the same, I
cloned the hard drive...

The machine that is working fine is a Asus M5A97 R.20 + Zogis GeForce GT210
The machine that is with blank screen after Xorg is loaded is ASRock
980DE3/U3S3 + Point of View GeForce GT210.

What can I do to solve this problem?

ASRock has:
Northbridge: AMD RX881/760G; Southbridge: AMD SB710
And Asus has:
Northbridge: AMD 970; Southbridge: AMD SB950

Tnx for your help!

*Other outputs:*
*-core
 description: Motherboard
       product: M5A97 LE R2.0
       vendor: ASUSTeK COMPUTER INC.
       physical id: 0
       version: Rev 1.xx
       serial: 130207833100091
       slot: To be filled by O.E.M.
     *-firmware
          description: BIOS
          vendor: American Megatrends Inc.
          physical id: 0
          version: 1503
          date: 01/11/2013
          size: 64KiB
          capacity: 8128KiB
          capabilities: pci upgrade shadowing cdboot bootselect socketedrom
edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen
int9keyboard int14serial
int17printer acpi usb biosbootspecification uefi
*-pci:0
          description: Host bridge
          product: RD890 PCI to PCI bridge (external gfx0 port B)
          vendor: Advanced Micro Devices, Inc. [AMD/ATI]
          physical id: 100
          bus info: pci at 0000:00:00.0
          version: 02
          width: 32 bits
          clock: 33MHz

----------------------------------------------------------------------------------

*-core
       description: Motherboard
       product: 980DE3/U3S3
       vendor: ASRock
       physical id: 0
       serial: E80-46037902134
     *-firmware
          description: BIOS
          vendor: American Megatrends Inc.
          physical id: 0
          version: P1.60
          date: 05/06/2014
          size: 64KiB
          capacity: 1984KiB
          capabilities: pci upgrade shadowing cdboot bootselect socketedrom
edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen
int9keyboard int14serial
int17printer int10video acpi usb ls120boot zipboot biosbootspecification
netboot
 *-pci:0
          description: Host bridge
          product: RS880 Host Bridge
          vendor: Advanced Micro Devices, Inc. [AMD]
          physical id: 100
          bus info: pci at 0000:00:00.0
          version: 00
          width: 32 bits
          clock: 66MHz
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20150608/c0242124/attachment-0001.html>


More information about the Nouveau mailing list