[Nouveau] Fwd: Problem with GT218 (GeForce GT210)
Andre Campos Rodovalho
andre.rodovalho at gmail.com
Fri Jun 12 07:18:38 PDT 2015
Hi again,
I got a new dmesg log with the debug parameters, but I guess I could not
isolate VESA. I blacklisted it at /etc/modprobe.d/blacklist.conf but
comparing those logs I see no difference... Is it possible to isolate VESA
somehow without removing it?
The new logs are here, I'm posting full content because I'm not sure what
information is more relevant...
*http://webativo.com/uploads/files/debug_nouveau.zip
<http://webativo.com/uploads/files/debug_nouveau.zip>*
Cheers
2015-06-12 6:53 GMT-03:00 Ilia Mirkin <imirkin at alum.mit.edu>:
> [clipped a bit so that it doesn't get held up by moderator, i've left
> the relevant dmesg bits in]
>
> On Fri, Jun 12, 2015 at 3:47 AM, Ilia Mirkin <imirkin at alum.mit.edu> wrote:
> > Hm, well you can see the messages about failure to set plls, which is why
> > you don't see anything. The only odd thing I see is that you're using
> vesa,
> > which can definitely mess things up. Try not using that. Also try booting
> > with nouveau.debug=debug drm.debug=0xe which might provide more relevant
> > info.
> >
> > On Jun 12, 2015 8:34 AM, "Andre Campos Rodovalho"
> > <andre.rodovalho at gmail.com> wrote:
> >>
> >> dmesg output:
> >>
> >>
> >>
> ---------------------------------------------------------------------------------------------------------
> >>
> >>
> >> [ 1.018704] vesafb: mode is 640x480x32, linelength=2560, pages=0
> >> [ 1.018706] vesafb: scrolling: redraw
> >> [ 1.018708] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> >> [ 1.026887] vesafb: framebuffer at 0xfb000000, mapped to
> >> 0xffffc90010e80000, using 1216k, total 1216k
> >> [ 1.027623] Console: switching to colour frame buffer device 80x30
> >> [ 1.028274] fb0: VESA VGA frame buffer device
>
> [...]
>
> >> [ 7.675761] fb: switching to nouveaufb from VESA VGA
> >> [ 7.675782] Console: switching to colour dummy device 80x25
> >> [ 7.676119] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x298280a2
> >> [ 7.676122] nouveau [ DEVICE][0000:01:00.0] Chipset: G98 (NV98)
> >> [ 7.676123] nouveau [ DEVICE][0000:01:00.0] Family : NV50
> >> [ 7.676213] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for
> >> image...
> >> [ 7.733822] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
> >> [ 7.733823] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
> >> [ 7.733905] nouveau [ VBIOS][0000:01:00.0] BIT signature found
> >> [ 7.733908] nouveau [ VBIOS][0000:01:00.0] version 70.18.36.00.00
> >> [ 7.754325] nouveau 0000:01:00.0: irq 49 for MSI/MSI-X
> >> [ 7.754335] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
> >> [ 7.754358] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
> >> [ 7.754360] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
> >> [ 7.754361] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
> >> [ 7.784065] nouveau [ PTHERM][0000:01:00.0] FAN control: none /
> >> external
> >> [ 7.784077] nouveau [ PTHERM][0000:01:00.0] fan management:
> automatic
> >> [ 7.784079] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
> >> [ 7.784087] nouveau [ CLK][0000:01:00.0] 0f: core 550 MHz shader
> >> 1375 MHz memory 266 MHz
> >> [ 7.784121] nouveau [ CLK][0000:01:00.0] --: core 566 MHz shader
> >> 1400 MHz memory 265 MHz
> >> [ 7.784167] nouveau E[ PDISP][0000:01:00.0] 02:0261: func 08 lookup
> >> failed, -2
> >> [ 7.784558] [TTM] Zone kernel: Available graphics memory: 4079904
> kiB
> >> [ 7.784560] [TTM] Zone dma32: Available graphics memory: 2097152
> kiB
> >> [ 7.784561] [TTM] Initializing pool allocator
> >> [ 7.784567] [TTM] Initializing DMA pool allocator
> >> [ 7.784584] nouveau [ DRM] VRAM: 1024 MiB
> >> [ 7.784586] nouveau [ DRM] GART: 1048576 MiB
> >> [ 7.784590] nouveau [ DRM] TMDS table version 2.0
> >> [ 7.784593] nouveau [ DRM] DCB version 4.0
> >> [ 7.784596] nouveau [ DRM] DCB outp 00: 02000300 00000028
> >> [ 7.784599] nouveau [ DRM] DCB outp 01: 01000302 00020030
> >> [ 7.784601] nouveau [ DRM] DCB outp 02: 04011310 00000028
> >> [ 7.784603] nouveau [ DRM] DCB outp 03: 02022322 00c20090
> >> [ 7.784605] nouveau [ DRM] DCB conn 00: 00001030
> >> [ 7.784608] nouveau [ DRM] DCB conn 01: 00000100
> >> [ 7.784610] nouveau [ DRM] DCB conn 02: 00002261
> >> [ 7.790697] [drm] Supports vblank timestamp caching Rev 2
> (21.10.2013).
> >> [ 7.790699] [drm] Driver supports precise vblank timestamp query.
> >> [ 7.799009] nouveau [ DRM] MM: using M2MF for buffer copies
> >> [ 7.869101] nouveau [ DRM] allocated 1360x768 fb: 0x60000, bo
> >> ffff8800cadfe000
> >> [ 7.869168] fbcon: nouveaufb (fb0) is primary device
> >> [ 7.870010] nouveau E[ DEVINIT][0000:01:00.0] unable to compute
> >> acceptable pll values
> >> [ 7.870012] nouveau E[ DEVINIT][0000:01:00.0] failed pll calculation
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20150612/3ba9472d/attachment-0001.html>
More information about the Nouveau
mailing list