[Nouveau] Fwd: Problem with GT218 (GeForce GT210)
Ilia Mirkin
imirkin at alum.mit.edu
Fri Jun 12 00:47:44 PDT 2015
Hm, well you can see the messages about failure to set plls, which is why
you don't see anything. The only odd thing I see is that you're using vesa,
which can definitely mess things up. Try not using that. Also try booting
with nouveau.debug=debug drm.debug=0xe which might provide more relevant
info.
On Jun 12, 2015 8:34 AM, "Andre Campos Rodovalho" <andre.rodovalho at gmail.com>
wrote:
> dmesg output:
>
>
> ---------------------------------------------------------------------------------------------------------
>
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Initializing cgroup subsys cpuacct
> [ 0.000000] Linux version 3.16.0-38-generic (buildd at allspice) (gcc
> version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #52~14.04.1-Ubuntu SMP Fri May 8
> 09:43:57 UTC 2015 (Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10)
> [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic
> root=/dev/sda2 ro
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff]
> usable
> [ 0.000000] BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffaffff] ACPI
> data
> [ 0.000000] BIOS-e820: [mem 0x00000000cffb0000-0x00000000cffdffff] ACPI
> NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff]
> reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff]
> usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.6 present.
> [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By
> O.E.M./980DE3/U3S3, BIOS P1.60 05/06/2014
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] AGP: No AGP bridge found
> [ 0.000000] e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-EFFFF uncachable
> [ 0.000000] F0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
> [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
> [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
> [ 0.000000] 3 disabled
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] TOM2: 000000022f000000 aka 8944M
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
> 0x7010600070106
> [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
> [ 0.000000] e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
> [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at
> [ffff8800000ff780]
> [ 0.000000] Scanning 1 areas for low memory corruption
> [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size
> 24576
> [ 0.000000] Using GB pages for direct mapping
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] BRK [0x01fbd000, 0x01fbdfff] PGTABLE
> [ 0.000000] BRK [0x01fbe000, 0x01fbefff] PGTABLE
> [ 0.000000] BRK [0x01fbf000, 0x01fbffff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x22ee00000-0x22effffff]
> [ 0.000000] [mem 0x22ee00000-0x22effffff] page 2M
> [ 0.000000] BRK [0x01fc0000, 0x01fc0fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22edfffff]
> [ 0.000000] [mem 0x22c000000-0x22edfffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
> [ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff9ffff]
> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
> [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
> [ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
> [ 0.000000] [mem 0xcfe00000-0xcff9ffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
> [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
> [ 0.000000] RAMDISK: [mem 0x35a96000-0x36d42fff]
> [ 0.000000] ACPI: Early table checksum verification disabled
> [ 0.000000] ACPI: RSDP 0x00000000000FB6C0 000014 (v00 ACPIAM)
> [ 0.000000] ACPI: RSDT 0x00000000CFFA0000 000040 (v01 050614 RSDT1213
> 20140506 MSFT 00000097)
> [ 0.000000] ACPI: FACP 0x00000000CFFA0200 000084 (v01 A_M_I OEMFACP
> 12000601 MSFT 00000097)
> [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field
> Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1
> (20140424/tbfadt-649)
> [ 0.000000] ACPI: DSDT 0x00000000CFFA0460 0088B0 (v01 AS636 AS636152
> 00000152 INTL 20051117)
> [ 0.000000] ACPI: FACS 0x00000000CFFB0000 000040
> [ 0.000000] ACPI: APIC 0x00000000CFFA0390 00008C (v01 050614 APIC1213
> 20140506 MSFT 00000097)
> [ 0.000000] ACPI: MCFG 0x00000000CFFA0420 00003C (v01 050614 OEMMCFG
> 20140506 MSFT 00000097)
> [ 0.000000] ACPI: OEMB 0x00000000CFFB0040 000072 (v01 050614 OEMB1213
> 20140506 MSFT 00000097)
> [ 0.000000] ACPI: AAFT 0x00000000CFFAA460 000027 (v01 050614 OEMAAFT
> 20140506 MSFT 00000097)
> [ 0.000000] ACPI: HPET 0x00000000CFFAA490 000038 (v01 050614 OEMHPET
> 20140506 MSFT 00000097)
> [ 0.000000] ACPI: SSDT 0x00000000CFFAA4D0 001714 (v01 A M I POWERNOW
> 00000001 AMD 00000001)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022effffff]
> [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22effffff]
> [ 0.000000] NODE_DATA [mem 0x22eff9000-0x22effdfff]
> [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD ->
> [ffff880226600000-ffff88022e5fffff] on node 0
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> [ 0.000000] Normal [mem 0x100000000-0x22effffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
> [ 0.000000] node 0: [mem 0x00100000-0xcff9ffff]
> [ 0.000000] node 0: [mem 0x100000000-0x22effffff]
> [ 0.000000] On node 0 totalpages: 2092860
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 21 pages reserved
> [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 13247 pages used for memmap
> [ 0.000000] DMA32 zone: 847776 pages, LIFO batch:31
> [ 0.000000] Normal zone: 19392 pages used for memmap
> [ 0.000000] Normal zone: 1241088 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
> [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 24, version 33, address 0xfec00000, GSI
> 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 40
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e5fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000e6000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xcffa0000-0xcffaffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xcffb0000-0xcffdffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffdfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
> [ 0.000000] e820: [mem 0xd0000000-0xffdfffff] available for PCI devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8
> nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022ec00000 s81408
> r8192 d20992 u262144
> [ 0.000000] pcpu-alloc: s81408 r8192 d20992 u262144 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 2060136
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line:
> BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=/dev/sda2 ro
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
> [ 0.000000] AGP: Checking aperture...
> [ 0.000000] AGP: No AGP bridge found
> [ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff]
> (32MB)
> [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
> [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
> [ 0.000000] AGP: This costs you 64MB of RAM
> [ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff]
> (65536KB)
> [ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
> [ 0.000000] Memory: 8072292K/8371440K available (7626K kernel code,
> 1131K rwdata, 3596K rodata, 1352K init, 1300K bss, 299148K reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
> [ 0.000000] Offload RCU callbacks from all CPUs
> [ 0.000000] Offload RCU callbacks from CPUs: 0-7.
> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
> [ 0.000000] NR_IRQS:16640 nr_irqs:744 16
> [ 0.000000] spurious 8259A interrupt: IRQ7.
> [ 0.000000] Console: colour dummy device 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] allocated 33554432 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want
> memory cgroups
> [ 0.000000] hpet clockevent registered
> [ 0.000000] tsc: Fast TSC calibration using PIT
> [ 0.000000] tsc: Detected 4680.606 MHz processor
> [ 0.000020] Calibrating delay loop (skipped), value calculated using
> timer frequency.. 9361.21 BogoMIPS (lpj=18722424)
> [ 0.000024] pid_max: default: 32768 minimum: 301
> [ 0.000031] ACPI: Core revision 20140424
> [ 0.002757] ACPI: All ACPI Tables successfully acquired
> [ 0.011663] Security Framework initialized
> [ 0.011684] AppArmor: AppArmor initialized
> [ 0.011686] Yama: becoming mindful.
> [ 0.012143] Dentry cache hash table entries: 1048576 (order: 11,
> 8388608 bytes)
> [ 0.014204] Inode-cache hash table entries: 524288 (order: 10, 4194304
> bytes)
> [ 0.015161] Mount-cache hash table entries: 16384 (order: 5, 131072
> bytes)
> [ 0.015170] Mountpoint-cache hash table entries: 16384 (order: 5,
> 131072 bytes)
> [ 0.015394] Initializing cgroup subsys memory
> [ 0.015413] Initializing cgroup subsys devices
> [ 0.015419] Initializing cgroup subsys freezer
> [ 0.015422] Initializing cgroup subsys net_cls
> [ 0.015426] Initializing cgroup subsys blkio
> [ 0.015430] Initializing cgroup subsys perf_event
> [ 0.015432] Initializing cgroup subsys net_prio
> [ 0.015439] Initializing cgroup subsys hugetlb
> [ 0.015456] tseg: 0000000000
> [ 0.015460] CPU: Physical Processor ID: 0
> [ 0.015462] CPU: Processor Core ID: 0
> [ 0.015464] mce: CPU supports 7 MCE banks
> [ 0.015470] LVT offset 1 assigned for vector 0xf9
> [ 0.015475] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
> [ 0.015475] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
> [ 0.015475] tlb_flushall_shift: 6
> [ 0.015553] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 -
> ffffffff81e76000)
> [ 0.016170] ftrace: allocating 29244 entries in 115 pages
> [ 0.023710] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.063438] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam:
> 15, model: 02, stepping: 00)
> [ 0.167980] Performance Events: Fam15h core perfctr, AMD PMU driver.
> [ 0.167985] ... version: 0
> [ 0.167987] ... bit width: 48
> [ 0.167988] ... generic registers: 6
> [ 0.167990] ... value mask: 0000ffffffffffff
> [ 0.167992] ... max period: 00007fffffffffff
> [ 0.167993] ... fixed-purpose events: 0
> [ 0.167995] ... event mask: 000000000000003f
> [ 0.169378] NMI watchdog: enabled on all CPUs, permanently consumes one
> hw-PMU counter.
> [ 0.169445] x86: Booting SMP configuration:
> [ 0.169447] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
> [ 0.261441] x86: Booted up 1 node, 8 CPUs
> [ 0.261446] smpboot: Total of 8 processors activated (74889.69 BogoMIPS)
> [ 0.269594] devtmpfs: initialized
> [ 0.272590] evm: security.selinux
> [ 0.272592] evm: security.SMACK64
> [ 0.272594] evm: security.SMACK64EXEC
> [ 0.272596] evm: security.SMACK64TRANSMUTE
> [ 0.272597] evm: security.SMACK64MMAP
> [ 0.272599] evm: security.ima
> [ 0.272600] evm: security.capability
> [ 0.272651] PM: Registering ACPI NVS region [mem 0xcffb0000-0xcffdffff]
> (196608 bytes)
> [ 0.273377] pinctrl core: initialized pinctrl subsystem
> [ 0.273439] regulator-dummy: no parameters
> [ 0.273472] RTC time: 23:16:50, date: 06/11/15
> [ 0.273514] NET: Registered protocol family 16
> [ 0.273639] cpuidle: using governor ladder
> [ 0.273642] cpuidle: using governor menu
> [ 0.273705] ACPI: bus type PCI registered
> [ 0.273708] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.273767] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
> 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.273771] PCI: not using MMCONFIG
> [ 0.273773] PCI: Using configuration type 1 for base access
> [ 0.273775] PCI: Using configuration type 1 for extended access
> [ 0.274069] mtrr: your CPUs had inconsistent variable MTRR settings
> [ 0.274071] mtrr: probably your BIOS does not setup all CPUs.
> [ 0.274073] mtrr: corrected configuration.
> [ 0.276493] ACPI: Added _OSI(Module Device)
> [ 0.276496] ACPI: Added _OSI(Processor Device)
> [ 0.276498] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.276500] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.278445] ACPI: Executed 3 blocks of module-level executable AML code
> [ 0.281893] ACPI: Interpreter enabled
> [ 0.281902] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
> [\_S2_] (20140424/hwxface-580)
> [ 0.281918] ACPI: (supports S0 S1 S3 S4 S5)
> [ 0.281920] ACPI: Using IOAPIC for interrupt routing
> [ 0.281975] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
> 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.282810] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in
> ACPI motherboard resources
> [ 0.283069] PCI: Using host bridge windows from ACPI; if necessary, use
> "pci=nocrs" and report a bug
> [ 0.288165] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.288171] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM
> ClockPM Segments MSI]
> [ 0.288365] acpi PNP0A03:00: _OSC: platform does not support
> [PCIeHotplug PME]
> [ 0.288550] acpi PNP0A03:00: _OSC: OS now controls [AER PCIeCapability]
> [ 0.288835] PCI host bridge to bus 0000:00
> [ 0.288838] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.288840] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> [ 0.288843] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> [ 0.288846] pci_bus 0000:00: root bus resource [mem
> 0x000a0000-0x000bffff]
> [ 0.288848] pci_bus 0000:00: root bus resource [mem
> 0x000d0000-0x000dffff]
> [ 0.288851] pci_bus 0000:00: root bus resource [mem
> 0xd0000000-0xdfffffff]
> [ 0.288853] pci_bus 0000:00: root bus resource [mem
> 0xf0000000-0xfebfffff]
> [ 0.288863] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
> [ 0.288955] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
> [ 0.288988] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
> [ 0.289023] pci 0000:00:02.0: System wakeup disabled by ACPI
> [ 0.289059] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
> [ 0.289090] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
> [ 0.289127] pci 0000:00:06.0: System wakeup disabled by ACPI
> [ 0.289159] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
> [ 0.289190] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
> [ 0.289224] pci 0000:00:07.0: System wakeup disabled by ACPI
> [ 0.289257] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
> [ 0.289288] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
> [ 0.289322] pci 0000:00:09.0: System wakeup disabled by ACPI
> [ 0.289353] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
> [ 0.289383] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
> [ 0.289417] pci 0000:00:0a.0: System wakeup disabled by ACPI
> [ 0.289463] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
> [ 0.289482] pci 0000:00:11.0: reg 0x10: [io 0x9000-0x9007]
> [ 0.289491] pci 0000:00:11.0: reg 0x14: [io 0x8000-0x8003]
> [ 0.289499] pci 0000:00:11.0: reg 0x18: [io 0x7000-0x7007]
> [ 0.289508] pci 0000:00:11.0: reg 0x1c: [io 0x6000-0x6003]
> [ 0.289516] pci 0000:00:11.0: reg 0x20: [io 0x5000-0x500f]
> [ 0.289525] pci 0000:00:11.0: reg 0x24: [mem 0xf9fffc00-0xf9ffffff]
> [ 0.289622] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
> [ 0.289635] pci 0000:00:12.0: reg 0x10: [mem 0xf9ffe000-0xf9ffefff]
> [ 0.289715] pci 0000:00:12.0: System wakeup disabled by ACPI
> [ 0.289748] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
> [ 0.289760] pci 0000:00:12.1: reg 0x10: [mem 0xf9ffd000-0xf9ffdfff]
> [ 0.289841] pci 0000:00:12.1: System wakeup disabled by ACPI
> [ 0.289879] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
> [ 0.289896] pci 0000:00:12.2: reg 0x10: [mem 0xf9fff800-0xf9fff8ff]
> [ 0.289973] pci 0000:00:12.2: supports D1 D2
> [ 0.289974] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
> [ 0.290012] pci 0000:00:12.2: System wakeup disabled by ACPI
> [ 0.290050] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
> [ 0.290062] pci 0000:00:13.0: reg 0x10: [mem 0xf9ffc000-0xf9ffcfff]
> [ 0.290143] pci 0000:00:13.0: System wakeup disabled by ACPI
> [ 0.290175] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
> [ 0.290187] pci 0000:00:13.1: reg 0x10: [mem 0xf9ffb000-0xf9ffbfff]
> [ 0.290269] pci 0000:00:13.1: System wakeup disabled by ACPI
> [ 0.290306] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
> [ 0.290324] pci 0000:00:13.2: reg 0x10: [mem 0xf9fff400-0xf9fff4ff]
> [ 0.290400] pci 0000:00:13.2: supports D1 D2
> [ 0.290401] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
> [ 0.290440] pci 0000:00:13.2: System wakeup disabled by ACPI
> [ 0.290481] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
> [ 0.290619] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
> [ 0.290634] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
> [ 0.290642] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
> [ 0.290650] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
> [ 0.290658] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
> [ 0.290667] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
> [ 0.290685] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io
> 0x01f0-0x01f7]
> [ 0.290688] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
> [ 0.290690] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io
> 0x0170-0x0177]
> [ 0.290692] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
> [ 0.290775] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
> [ 0.290795] pci 0000:00:14.2: reg 0x10: [mem 0xf9ff4000-0xf9ff7fff
> 64bit]
> [ 0.290856] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
> [ 0.290891] pci 0000:00:14.2: System wakeup disabled by ACPI
> [ 0.290924] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
> [ 0.291040] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
> [ 0.291100] pci 0000:00:14.4: System wakeup disabled by ACPI
> [ 0.291132] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
> [ 0.291144] pci 0000:00:14.5: reg 0x10: [mem 0xf9ffa000-0xf9ffafff]
> [ 0.291226] pci 0000:00:14.5: System wakeup disabled by ACPI
> [ 0.291261] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
> [ 0.291323] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
> [ 0.291378] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
> [ 0.291435] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
> [ 0.291495] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
> [ 0.291550] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
> [ 0.291651] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
> [ 0.291661] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
> [ 0.291671] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff
> 64bit pref]
> [ 0.291680] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff
> 64bit]
> [ 0.291686] pci 0000:01:00.0: reg 0x24: [io 0xa800-0xa87f]
> [ 0.291692] pci 0000:01:00.0: reg 0x30: [mem 0xfe8e0000-0xfe8fffff pref]
> [ 0.296100] pci 0000:00:02.0: PCI bridge to [bus 01]
> [ 0.296105] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
> [ 0.296107] pci 0000:00:02.0: bridge window [mem
> 0xfa000000-0xfe8fffff]
> [ 0.296109] pci 0000:00:02.0: bridge window [mem
> 0xd0000000-0xdfffffff 64bit pref]
> [ 0.296156] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
> [ 0.296170] pci 0000:02:00.0: reg 0x10: [io 0xb800-0xb8ff]
> [ 0.296189] pci 0000:02:00.0: reg 0x18: [mem 0xfe9ff000-0xfe9fffff
> 64bit]
> [ 0.296201] pci 0000:02:00.0: reg 0x20: [mem 0xf8efc000-0xf8efffff
> 64bit pref]
> [ 0.296263] pci 0000:02:00.0: supports D1 D2
> [ 0.296264] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.304108] pci 0000:00:06.0: PCI bridge to [bus 02]
> [ 0.304112] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff]
> [ 0.304114] pci 0000:00:06.0: bridge window [mem
> 0xfe900000-0xfe9fffff]
> [ 0.304117] pci 0000:00:06.0: bridge window [mem
> 0xf8e00000-0xf8efffff 64bit pref]
> [ 0.304162] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
> [ 0.304174] pci 0000:03:00.0: reg 0x10: [io 0xd800-0xd807]
> [ 0.304181] pci 0000:03:00.0: reg 0x14: [io 0xd400-0xd403]
> [ 0.304188] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd007]
> [ 0.304195] pci 0000:03:00.0: reg 0x1c: [io 0xc800-0xc803]
> [ 0.304202] pci 0000:03:00.0: reg 0x20: [io 0xc400-0xc41f]
> [ 0.304209] pci 0000:03:00.0: reg 0x24: [mem 0xfeaffc00-0xfeaffdff]
> [ 0.312113] pci 0000:00:07.0: PCI bridge to [bus 03]
> [ 0.312118] pci 0000:00:07.0: bridge window [io 0xc000-0xdfff]
> [ 0.312119] pci 0000:00:07.0: bridge window [mem
> 0xfea00000-0xfeafffff]
> [ 0.312166] pci 0000:04:00.0: [1b6f:7052] type 00 class 0x0c0330
> [ 0.312184] pci 0000:04:00.0: reg 0x10: [mem 0xfebf8000-0xfebfffff
> 64bit]
> [ 0.312263] pci 0000:04:00.0: supports D1 D2
> [ 0.312265] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.320122] pci 0000:00:09.0: PCI bridge to [bus 04]
> [ 0.320128] pci 0000:00:09.0: bridge window [mem
> 0xfeb00000-0xfebfffff]
> [ 0.320173] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
> [ 0.320187] pci 0000:05:00.0: reg 0x10: [io 0xe800-0xe8ff]
> [ 0.320206] pci 0000:05:00.0: reg 0x18: [mem 0xf8fff000-0xf8ffffff
> 64bit pref]
> [ 0.320218] pci 0000:05:00.0: reg 0x20: [mem 0xf8ff8000-0xf8ffbfff
> 64bit pref]
> [ 0.320279] pci 0000:05:00.0: supports D1 D2
> [ 0.320280] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.328130] pci 0000:00:0a.0: PCI bridge to [bus 05]
> [ 0.328134] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
> [ 0.328138] pci 0000:00:0a.0: bridge window [mem
> 0xf8f00000-0xf8ffffff 64bit pref]
> [ 0.328209] pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive
> decode)
> [ 0.328219] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7]
> (subtractive decode)
> [ 0.328220] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff]
> (subtractive decode)
> [ 0.328221] pci 0000:00:14.4: bridge window [mem
> 0x000a0000-0x000bffff] (subtractive decode)
> [ 0.328223] pci 0000:00:14.4: bridge window [mem
> 0x000d0000-0x000dffff] (subtractive decode)
> [ 0.328224] pci 0000:00:14.4: bridge window [mem
> 0xd0000000-0xdfffffff] (subtractive decode)
> [ 0.328225] pci 0000:00:14.4: bridge window [mem
> 0xf0000000-0xfebfffff] (subtractive decode)
> [ 0.328246] pci_bus 0000:00: on NUMA node 0
> [ 0.328858] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 14 15)
> *0, disabled.
> [ 0.328900] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 12 14 15)
> *0, disabled.
> [ 0.328942] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 12 14 15) *0,
> disabled.
> [ 0.328981] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 14 15)
> *0, disabled.
> [ 0.329021] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 12 14 15) *0,
> disabled.
> [ 0.329061] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 12 14 15) *0,
> disabled.
> [ 0.329101] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 12 14 15) *0,
> disabled.
> [ 0.329143] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15)
> *0, disabled.
> [ 0.329200] ACPI: Enabled 1 GPEs in block 00 to 1F
> [ 0.329282] vgaarb: setting as boot device: PCI:0000:01:00.0
> [ 0.329285] vgaarb: device added:
> PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.329288] vgaarb: loaded
> [ 0.329290] vgaarb: bridge control possible 0000:01:00.0
> [ 0.329498] SCSI subsystem initialized
> [ 0.329545] libata version 3.00 loaded.
> [ 0.329567] ACPI: bus type USB registered
> [ 0.329583] usbcore: registered new interface driver usbfs
> [ 0.329592] usbcore: registered new interface driver hub
> [ 0.329612] usbcore: registered new device driver usb
> [ 0.329737] PCI: Using ACPI for IRQ routing
> [ 0.337703] PCI: pci_cache_line_size set to 64 bytes
> [ 0.337758] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
> [ 0.337759] e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff]
> [ 0.337760] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
> [ 0.337848] NetLabel: Initializing
> [ 0.337849] NetLabel: domain hash size = 128
> [ 0.337851] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.337861] NetLabel: unlabeled traffic allowed by default
> [ 0.337907] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> [ 0.337912] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
> [ 0.339983] Switched to clocksource hpet
> [ 0.345803] AppArmor: AppArmor Filesystem Enabled
> [ 0.345823] pnp: PnP ACPI init
> [ 0.345835] ACPI: bus type PNP registered
> [ 0.345949] system 00:00: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 0.345997] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.346391] system 00:02: [mem 0xfec00000-0xfec00fff] could not be
> reserved
> [ 0.346394] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
> [ 0.346397] system 00:02: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 0.346596] system 00:03: [io 0x04d0-0x04d1] has been reserved
> [ 0.346599] system 00:03: [io 0x040b] has been reserved
> [ 0.346602] system 00:03: [io 0x04d6] has been reserved
> [ 0.346605] system 00:03: [io 0x0c00-0x0c01] has been reserved
> [ 0.346607] system 00:03: [io 0x0c14] has been reserved
> [ 0.346610] system 00:03: [io 0x0c50-0x0c51] has been reserved
> [ 0.346613] system 00:03: [io 0x0c52] has been reserved
> [ 0.346615] system 00:03: [io 0x0c6c] has been reserved
> [ 0.346618] system 00:03: [io 0x0c6f] has been reserved
> [ 0.346620] system 00:03: [io 0x0cd0-0x0cd1] has been reserved
> [ 0.346623] system 00:03: [io 0x0cd2-0x0cd3] has been reserved
> [ 0.346626] system 00:03: [io 0x0cd4-0x0cd5] has been reserved
> [ 0.346628] system 00:03: [io 0x0cd6-0x0cd7] has been reserved
> [ 0.346631] system 00:03: [io 0x0cd8-0x0cdf] has been reserved
> [ 0.346634] system 00:03: [io 0x0800-0x089f] could not be reserved
> [ 0.346636] system 00:03: [io 0x0b00-0x0b0f] has been reserved
> [ 0.346639] system 00:03: [io 0x0b20-0x0b3f] has been reserved
> [ 0.346642] system 00:03: [io 0x0900-0x090f] has been reserved
> [ 0.346644] system 00:03: [io 0x0910-0x091f] has been reserved
> [ 0.346647] system 00:03: [io 0xfe00-0xfefe] has been reserved
> [ 0.346650] system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved
> [ 0.346653] system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
> [ 0.346656] system 00:03: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 0.346855] pnp 00:04: [dma 0 disabled]
> [ 0.346903] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 0.346983] system 00:05: [io 0x0290-0x029f] has been reserved
> [ 0.346986] system 00:05: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 0.347038] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
> [ 0.347041] system 00:06: Plug and Play ACPI device, IDs PNP0c02
> (active)
> [ 0.347225] system 00:07: [mem 0x00000000-0x0009ffff] could not be
> reserved
> [ 0.347228] system 00:07: [mem 0x000e0000-0x000fffff] could not be
> reserved
> [ 0.347231] system 00:07: [mem 0x00100000-0xcfffffff] could not be
> reserved
> [ 0.347234] system 00:07: [mem 0xfec00000-0xffffffff] could not be
> reserved
> [ 0.347237] system 00:07: Plug and Play ACPI device, IDs PNP0c01
> (active)
> [ 0.347320] pnp: PnP ACPI: found 8 devices
> [ 0.347322] ACPI: bus type PNP unregistered
> [ 0.353807] pci 0000:00:02.0: PCI bridge to [bus 01]
> [ 0.353810] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
> [ 0.353814] pci 0000:00:02.0: bridge window [mem
> 0xfa000000-0xfe8fffff]
> [ 0.353817] pci 0000:00:02.0: bridge window [mem
> 0xd0000000-0xdfffffff 64bit pref]
> [ 0.353822] pci 0000:00:06.0: PCI bridge to [bus 02]
> [ 0.353824] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff]
> [ 0.353828] pci 0000:00:06.0: bridge window [mem
> 0xfe900000-0xfe9fffff]
> [ 0.353831] pci 0000:00:06.0: bridge window [mem
> 0xf8e00000-0xf8efffff 64bit pref]
> [ 0.353835] pci 0000:00:07.0: PCI bridge to [bus 03]
> [ 0.353838] pci 0000:00:07.0: bridge window [io 0xc000-0xdfff]
> [ 0.353841] pci 0000:00:07.0: bridge window [mem
> 0xfea00000-0xfeafffff]
> [ 0.353846] pci 0000:00:09.0: PCI bridge to [bus 04]
> [ 0.353849] pci 0000:00:09.0: bridge window [mem
> 0xfeb00000-0xfebfffff]
> [ 0.353853] pci 0000:00:0a.0: PCI bridge to [bus 05]
> [ 0.353856] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
> [ 0.353860] pci 0000:00:0a.0: bridge window [mem
> 0xf8f00000-0xf8ffffff 64bit pref]
> [ 0.353864] pci 0000:00:14.4: PCI bridge to [bus 06]
> [ 0.353876] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 0.353877] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 0.353878] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.353880] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
> [ 0.353881] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
> [ 0.353882] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
> [ 0.353883] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
> [ 0.353885] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe8fffff]
> [ 0.353886] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff
> 64bit pref]
> [ 0.353887] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
> [ 0.353888] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
> [ 0.353889] pci_bus 0000:02: resource 2 [mem 0xf8e00000-0xf8efffff
> 64bit pref]
> [ 0.353891] pci_bus 0000:03: resource 0 [io 0xc000-0xdfff]
> [ 0.353892] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
> [ 0.353893] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
> [ 0.353894] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
> [ 0.353896] pci_bus 0000:05: resource 2 [mem 0xf8f00000-0xf8ffffff
> 64bit pref]
> [ 0.353897] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
> [ 0.353898] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
> [ 0.353899] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.353900] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
> [ 0.353902] pci_bus 0000:06: resource 8 [mem 0xd0000000-0xdfffffff]
> [ 0.353903] pci_bus 0000:06: resource 9 [mem 0xf0000000-0xfebfffff]
> [ 0.353923] NET: Registered protocol family 2
> [ 0.354110] TCP established hash table entries: 65536 (order: 7, 524288
> bytes)
> [ 0.354288] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.354512] TCP: Hash tables configured (established 65536 bind 65536)
> [ 0.354544] TCP: reno registered
> [ 0.354554] UDP hash table entries: 4096 (order: 5, 131072 bytes)
> [ 0.354595] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
> [ 0.354661] NET: Registered protocol family 1
> [ 0.800566] pci 0000:01:00.0: Video device with shadowed ROM
> [ 0.800712] PCI: CLS 64 bytes, default 64
> [ 0.800769] Trying to unpack rootfs image as initramfs...
> [ 1.010395] Freeing initrd memory: 19124K (ffff880035a96000 -
> ffff880036d43000)
> [ 1.010691] PCI-DMA: Disabling AGP.
> [ 1.010769] PCI-DMA: aperture base @ c4000000 size 65536 KB
> [ 1.010771] PCI-DMA: using GART IOMMU.
> [ 1.010774] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
> [ 1.014431] perf: AMD NB counters detected
> [ 1.014496] microcode: CPU0: patch_level=0x06000817
> [ 1.014503] microcode: CPU1: patch_level=0x06000817
> [ 1.014513] microcode: CPU2: patch_level=0x06000817
> [ 1.014523] microcode: CPU3: patch_level=0x06000817
> [ 1.014533] microcode: CPU4: patch_level=0x06000817
> [ 1.014544] microcode: CPU5: patch_level=0x06000817
> [ 1.014553] microcode: CPU6: patch_level=0x06000817
> [ 1.014564] microcode: CPU7: patch_level=0x06000817
> [ 1.014613] microcode: Microcode Update Driver: v2.00 <
> tigran at aivazian.fsnet.co.uk>, Peter Oruba
> [ 1.014619] LVT offset 0 assigned for vector 0x400
> [ 1.014639] perf: AMD IBS detected (0x000000ff)
> [ 1.014657] Scanning for low memory corruption every 60 seconds
> [ 1.014968] futex hash table entries: 2048 (order: 5, 131072 bytes)
> [ 1.014992] Initialise system trusted keyring
> [ 1.015010] audit: initializing netlink subsys (disabled)
> [ 1.015024] audit: type=2000 audit(1434064609.896:1): initialized
> [ 1.015292] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 1.016720] zpool: loaded
> [ 1.016723] zbud: loaded
> [ 1.016845] VFS: Disk quotas dquot_6.5.2
> [ 1.016876] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 1.017318] fuse init (API version 7.23)
> [ 1.017394] msgmni has been set to 15932
> [ 1.017442] Key type big_key registered
> [ 1.017828] Key type asymmetric registered
> [ 1.017831] Asymmetric key parser 'x509' registered
> [ 1.017862] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 252)
> [ 1.017915] io scheduler noop registered
> [ 1.017918] io scheduler deadline registered (default)
> [ 1.017960] io scheduler cfq registered
> [ 1.018161] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
> [ 1.018295] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
> [ 1.018422] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
> [ 1.018463] pcieport 0000:00:09.0: irq 43 for MSI/MSI-X
> [ 1.018590] pcieport 0000:00:0a.0: irq 44 for MSI/MSI-X
> [ 1.018646] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 1.018661] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 1.018704] vesafb: mode is 640x480x32, linelength=2560, pages=0
> [ 1.018706] vesafb: scrolling: redraw
> [ 1.018708] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> [ 1.026887] vesafb: framebuffer at 0xfb000000, mapped to
> 0xffffc90010e80000, using 1216k, total 1216k
> [ 1.027623] Console: switching to colour frame buffer device 80x30
> [ 1.028274] fb0: VESA VGA frame buffer device
> [ 1.028370] input: Power Button as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
> [ 1.028398] ACPI: Power Button [PWRB]
> [ 1.028444] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 1.029305] ACPI: Power Button [PWRF]
> [ 1.029779] ACPI: acpi_idle registered with cpuidle
> [ 1.030211] GHES: HEST is not enabled!
> [ 1.030719] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [ 1.051604] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is
> a 16550A
> [ 1.054011] Linux agpgart interface v0.103
> [ 1.055645] brd: module loaded
> [ 1.056690] loop: module loaded
> [ 1.057325] libphy: Fixed MDIO Bus: probed
> [ 1.057761] tun: Universal TUN/TAP device driver, 1.6
> [ 1.058190] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
> [ 1.058676] PPP generic driver version 2.4.2
> [ 1.059153] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 1.059606] ehci-pci: EHCI PCI platform driver
> [ 1.060181] ehci-pci 0000:00:12.2: EHCI Host Controller
> [ 1.060640] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus
> number 1
> [ 1.061560] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3
> EHCI dummy qh workaround
> [ 1.062496] ehci-pci 0000:00:12.2: debug port 1
> [ 1.062998] ehci-pci 0000:00:12.2: irq 17, io mem 0xf9fff800
> [ 1.072731] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
> [ 1.073227] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0002
> [ 1.073681] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.074551] usb usb1: Product: EHCI Host Controller
> [ 1.074973] usb usb1: Manufacturer: Linux 3.16.0-38-generic ehci_hcd
> [ 1.075404] usb usb1: SerialNumber: 0000:00:12.2
> [ 1.075971] hub 1-0:1.0: USB hub found
> [ 1.076402] hub 1-0:1.0: 6 ports detected
> [ 1.077091] ehci-pci 0000:00:13.2: EHCI Host Controller
> [ 1.077521] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus
> number 2
> [ 1.078364] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3
> EHCI dummy qh workaround
> [ 1.079229] ehci-pci 0000:00:13.2: debug port 1
> [ 1.079699] ehci-pci 0000:00:13.2: irq 19, io mem 0xf9fff400
> [ 1.088779] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
> [ 1.089269] usb usb2: New USB device found, idVendor=1d6b,
> idProduct=0002
> [ 1.089718] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.090598] usb usb2: Product: EHCI Host Controller
> [ 1.091031] usb usb2: Manufacturer: Linux 3.16.0-38-generic ehci_hcd
> [ 1.091458] usb usb2: SerialNumber: 0000:00:13.2
> [ 1.092027] hub 2-0:1.0: USB hub found
> [ 1.092455] hub 2-0:1.0: 6 ports detected
> [ 1.093003] ehci-platform: EHCI generic platform driver
> [ 1.093427] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 1.093842] ohci-pci: OHCI PCI platform driver
> [ 1.094365] ohci-pci 0000:00:12.0: OHCI PCI host controller
> [ 1.094785] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus
> number 3
> [ 1.095643] ohci-pci 0000:00:12.0: irq 16, io mem 0xf9ffe000
> [ 1.152862] usb usb3: New USB device found, idVendor=1d6b,
> idProduct=0001
> [ 1.153294] usb usb3: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.154140] usb usb3: Product: OHCI PCI host controller
> [ 1.154576] usb usb3: Manufacturer: Linux 3.16.0-38-generic ohci_hcd
> [ 1.155016] usb usb3: SerialNumber: 0000:00:12.0
> [ 1.155600] hub 3-0:1.0: USB hub found
> [ 1.156043] hub 3-0:1.0: 3 ports detected
> [ 1.156655] ohci-pci 0000:00:12.1: OHCI PCI host controller
> [ 1.157090] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus
> number 4
> [ 1.157929] ohci-pci 0000:00:12.1: irq 16, io mem 0xf9ffd000
> [ 1.216925] usb usb4: New USB device found, idVendor=1d6b,
> idProduct=0001
> [ 1.217364] usb usb4: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.218228] usb usb4: Product: OHCI PCI host controller
> [ 1.218669] usb usb4: Manufacturer: Linux 3.16.0-38-generic ohci_hcd
> [ 1.219105] usb usb4: SerialNumber: 0000:00:12.1
> [ 1.219692] hub 4-0:1.0: USB hub found
> [ 1.220126] hub 4-0:1.0: 3 ports detected
> [ 1.220728] ohci-pci 0000:00:13.0: OHCI PCI host controller
> [ 1.221161] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus
> number 5
> [ 1.222054] ohci-pci 0000:00:13.0: irq 18, io mem 0xf9ffc000
> [ 1.280989] usb usb5: New USB device found, idVendor=1d6b,
> idProduct=0001
> [ 1.281442] usb usb5: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.282335] usb usb5: Product: OHCI PCI host controller
> [ 1.282785] usb usb5: Manufacturer: Linux 3.16.0-38-generic ohci_hcd
> [ 1.283234] usb usb5: SerialNumber: 0000:00:13.0
> [ 1.283833] hub 5-0:1.0: USB hub found
> [ 1.284272] hub 5-0:1.0: 3 ports detected
> [ 1.284875] ohci-pci 0000:00:13.1: OHCI PCI host controller
> [ 1.285305] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus
> number 6
> [ 1.286172] ohci-pci 0000:00:13.1: irq 18, io mem 0xf9ffb000
> [ 1.345068] usb usb6: New USB device found, idVendor=1d6b,
> idProduct=0001
> [ 1.345522] usb usb6: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.346411] usb usb6: Product: OHCI PCI host controller
> [ 1.346858] usb usb6: Manufacturer: Linux 3.16.0-38-generic ohci_hcd
> [ 1.347307] usb usb6: SerialNumber: 0000:00:13.1
> [ 1.347896] hub 6-0:1.0: USB hub found
> [ 1.348335] hub 6-0:1.0: 3 ports detected
> [ 1.348937] ohci-pci 0000:00:14.5: OHCI PCI host controller
> [ 1.349366] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus
> number 7
> [ 1.350231] ohci-pci 0000:00:14.5: irq 18, io mem 0xf9ffa000
> [ 1.409109] usb usb7: New USB device found, idVendor=1d6b,
> idProduct=0001
> [ 1.409546] usb usb7: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.410403] usb usb7: Product: OHCI PCI host controller
> [ 1.410846] usb usb7: Manufacturer: Linux 3.16.0-38-generic ohci_hcd
> [ 1.411294] usb usb7: SerialNumber: 0000:00:14.5
> [ 1.411881] hub 7-0:1.0: USB hub found
> [ 1.412320] hub 7-0:1.0: 2 ports detected
> [ 1.412809] ohci-platform: OHCI generic platform driver
> [ 1.413242] uhci_hcd: USB Universal Host Controller Interface driver
> [ 1.413734] xhci_hcd 0000:04:00.0: xHCI Host Controller
> [ 1.414166] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus
> number 8
> [ 1.415118] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
> [ 1.415165] usb usb8: New USB device found, idVendor=1d6b,
> idProduct=0002
> [ 1.415619] usb usb8: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.416507] usb usb8: Product: xHCI Host Controller
> [ 1.416952] usb usb8: Manufacturer: Linux 3.16.0-38-generic xhci_hcd
> [ 1.417409] usb usb8: SerialNumber: 0000:04:00.0
> [ 1.417980] hub 8-0:1.0: USB hub found
> [ 1.418413] hub 8-0:1.0: 4 ports detected
> [ 1.418922] xhci_hcd 0000:04:00.0: xHCI Host Controller
> [ 1.419346] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus
> number 9
> [ 1.420224] usb usb9: New USB device found, idVendor=1d6b,
> idProduct=0003
> [ 1.420676] usb usb9: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.421566] usb usb9: Product: xHCI Host Controller
> [ 1.422009] usb usb9: Manufacturer: Linux 3.16.0-38-generic xhci_hcd
> [ 1.422453] usb usb9: SerialNumber: 0000:04:00.0
> [ 1.423014] hub 9-0:1.0: USB hub found
> [ 1.423450] hub 9-0:1.0: 4 ports detected
> [ 1.423994] i8042: PNP: No PS/2 controller found. Probing ports
> directly.
> [ 1.426976] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.427395] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 1.427950] mousedev: PS/2 mouse device common for all mice
> [ 1.428542] rtc_cmos 00:01: RTC can wake from S4
> [ 1.429140] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
> [ 1.429594] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes
> nvram, hpet irqs
> [ 1.430501] device-mapper: uevent: version 1.0.3
> [ 1.431015] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30)
> initialised: dm-devel at redhat.com
> [ 1.431876] ledtrig-cpu: registered to indicate activity on CPUs
> [ 1.432385] TCP: cubic registered
> [ 1.432912] NET: Registered protocol family 10
> [ 1.433562] NET: Registered protocol family 17
> [ 1.433981] Key type dns_resolver registered
> [ 1.435067] Loading compiled-in X.509 certificates
> [ 1.436122] Loaded X.509 cert 'Magrathea: Glacier signing key:
> c284edaccf0b473652c34d23bec356944236e63b'
> [ 1.436985] registered taskstats version 1
> [ 1.439184] Key type trusted registered
> [ 1.442721] Key type encrypted registered
> [ 1.443116] AppArmor: AppArmor sha1 policy hashing enabled
> [ 1.443514] ima: No TPM chip found, activating TPM-bypass!
> [ 1.443921] evm: HMAC attrs: 0x1
> [ 1.444727] Magic number: 3:985:301
> [ 1.445140] tty tty30: hash matches
> [ 1.445619] rtc_cmos 00:01: setting system clock to 2015-06-11 23:16:51
> UTC (1434064611)
> [ 1.446702] acpi-cpufreq: overriding BIOS provided _PSD data
> [ 1.447525] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 1.447941] EDD information not available.
> [ 1.448403] PM: Hibernation image not present or could not be loaded.
> [ 1.449473] Freeing unused kernel memory: 1352K (ffffffff81d1c000 -
> ffffffff81e6e000)
> [ 1.450347] Write protecting the kernel read-only data: 12288k
> [ 1.452474] Freeing unused kernel memory: 556K (ffff880001775000 -
> ffff880001800000)
> [ 1.454811] Freeing unused kernel memory: 500K (ffff880001b83000 -
> ffff880001c00000)
> [ 1.467097] systemd-udevd[144]: starting version 204
> [ 1.482331] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 1.482910] ahci 0000:00:11.0: version 3.0
> [ 1.483020] r8169 0000:02:00.0: irq 46 for MSI/MSI-X
> [ 1.483144] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps
> 0xf impl SATA mode
> [ 1.483256] r8169 0000:02:00.0 eth0: RTL8168e/8111e at
> 0xffffc90010e66000, e8:de:27:01:f6:19, XID 0c200000 IRQ 46
> [ 1.483257] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200
> bytes, tx checksumming: ko]
> [ 1.483275] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 1.483500] r8169 0000:05:00.0: irq 47 for MSI/MSI-X
> [ 1.483671] r8169 0000:05:00.0 eth1: RTL8168evl/8111evl at
> 0xffffc90010fb4000, d0:50:99:30:c6:76, XID 0c900800 IRQ 47
> [ 1.483672] r8169 0000:05:00.0 eth1: jumbo features [frames: 9200
> bytes, tx checksumming: ko]
> [ 1.488749] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo
> pmp pio slum part ccc
> [ 1.490977] scsi0 : ahci
> [ 1.492030] scsi1 : ahci
> [ 1.494136] scsi2 : ahci
> [ 1.494821] scsi3 : ahci
> [ 1.495406] ata1: SATA max UDMA/133 abar m1024 at 0xf9fffc00 port
> 0xf9fffd00 irq 22
> [ 1.496404] ata2: SATA max UDMA/133 abar m1024 at 0xf9fffc00 port
> 0xf9fffd80 irq 22
> [ 1.497415] ata3: SATA max UDMA/133 abar m1024 at 0xf9fffc00 port
> 0xf9fffe00 irq 22
> [ 1.498417] ata4: SATA max UDMA/133 abar m1024 at 0xf9fffc00 port
> 0xf9fffe80 irq 22
> [ 1.499589] ahci 0000:03:00.0: irq 48 for MSI/MSI-X
> [ 1.499613] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
> [ 1.500164] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps
> 0x3 impl SATA mode
> [ 1.501225] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp
> pio slum part ccc sxs
> [ 1.501229] scsi4 : pata_atiixp
> [ 1.501445] scsi5 : pata_atiixp
> [ 1.501573] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00
> irq 14
> [ 1.501573] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08
> irq 15
> [ 1.504907] scsi6 : ahci
> [ 1.505613] scsi7 : ahci
> [ 1.506270] ata7: SATA max UDMA/133 abar m512 at 0xfeaffc00 port
> 0xfeaffd00 irq 48
> [ 1.507196] ata8: SATA max UDMA/133 abar m512 at 0xfeaffc00 port
> 0xfeaffd80 irq 48
> [ 1.529416] systemd-udevd[147]: renamed network interface eth1 to p10p1
> [ 1.545433] systemd-udevd[152]: renamed network interface eth0 to p7p1
> [ 1.573331] usb 2-2: new high-speed USB device number 2 using ehci-pci
> [ 1.685915] ata6.01: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.00, max UDMA/66
> [ 1.701871] ata6.01: configured for UDMA/66
> [ 1.706182] usb 2-2: New USB device found, idVendor=0ace, idProduct=1215
> [ 1.706692] usb 2-2: New USB device strings: Mfr=16, Product=32,
> SerialNumber=0
> [ 1.707680] usb 2-2: Product: USB2.0 WLAN
> [ 1.708165] usb 2-2: Manufacturer: ZyDAS
> [ 1.817520] ata1: SATA link down (SStatus 0 SControl 300)
> [ 1.818101] ata3: SATA link down (SStatus 0 SControl 300)
> [ 1.818587] ata4: SATA link down (SStatus 0 SControl 300)
> [ 1.819049] ata2: SATA link down (SStatus 0 SControl 300)
> [ 1.821142] scsi 5:0:1:0: CD-ROM HL-DT-ST DVD-RAM GSA-H58N
> 1.00 PQ: 0 ANSI: 5
> [ 1.831872] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2
> cdda tray
> [ 1.832776] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 1.833371] sr 5:0:1:0: Attached scsi CD-ROM sr0
> [ 1.833487] sr 5:0:1:0: Attached scsi generic sg0 type 5
> [ 1.841543] usb 4-1: new low-speed USB device number 2 using ohci-pci
> [ 1.997384] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 1.998773] ata7.00: ATA-9: SSD2SC120G1SA754D117-820, N0530A, max
> UDMA/133
> [ 1.999239] ata7.00: 234441648 sectors, multi 1: LBA48 NCQ (depth
> 31/32), AA
> [ 1.999981] ata7.00: configured for UDMA/133
> [ 2.000550] scsi 6:0:0:0: Direct-Access ATA SSD2SC120G1SA754
> 0A PQ: 0 ANSI: 5
> [ 2.001687] sd 6:0:0:0: [sda] 234441648 512-byte logical blocks: (120
> GB/111 GiB)
> [ 2.001692] sd 6:0:0:0: Attached scsi generic sg1 type 0
> [ 2.003149] sd 6:0:0:0: [sda] Write Protect is off
> [ 2.003554] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 2.003683] sd 6:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 2.005117] sda: sda1 sda2 sda3
> [ 2.005816] sd 6:0:0:0: [sda] Attached SCSI disk
> [ 2.008240] tsc: Refined TSC clocksource calibration: 4653.112 MHz
> [ 2.013385] usb 4-1: New USB device found, idVendor=04d9, idProduct=0022
> [ 2.013882] usb 4-1: New USB device strings: Mfr=0, Product=2,
> SerialNumber=0
> [ 2.014284] usb 4-1: Product: USB Keyboard
> [ 2.018348] hidraw: raw HID events driver (C) Jiri Kosina
> [ 2.042342] usbcore: registered new interface driver usbhid
> [ 2.042763] usbhid: USB HID core driver
> [ 2.044476] input: USB Keyboard as
> /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:04D9:0022.0001/input/input5
> [ 2.045444] hid-generic 0003:04D9:0022.0001: input,hidraw0: USB HID
> v1.10 Keyboard [USB Keyboard] on usb-0000:00:12.1-1/input0
> [ 2.046435] input: USB Keyboard as
> /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:04D9:0022.0002/input/input6
> [ 2.047461] hid-generic 0003:04D9:0022.0002: input,hidraw1: USB HID
> v1.10 Device [USB Keyboard] on usb-0000:00:12.1-1/input1
> [ 2.303673] ata8: SATA link down (SStatus 0 SControl 300)
> [ 2.920111] Switched to clocksource tsc
> [ 4.382933] floppy0: no floppy controllers found
> [ 7.272503] EXT4-fs (sda2): mounted filesystem with ordered data mode.
> Opts: (null)
> [ 7.364061] random: init urandom read with 70 bits of entropy available
> [ 7.388873] init: plymouth-upstart-bridge main process (237) terminated
> with status 1
> [ 7.389819] init: plymouth-upstart-bridge main process ended, respawning
> [ 7.394387] init: plymouth-upstart-bridge main process (246) terminated
> with status 1
> [ 7.395354] init: plymouth-upstart-bridge main process ended, respawning
> [ 7.399374] init: plymouth-upstart-bridge main process (250) terminated
> with status 1
> [ 7.400340] init: plymouth-upstart-bridge main process ended, respawning
> [ 7.402987] init: plymouth-upstart-bridge main process (254) terminated
> with status 1
> [ 7.403967] init: plymouth-upstart-bridge main process ended, respawning
> [ 7.495806] Adding 2097148k swap on /dev/sda1. Priority:-1 extents:1
> across:2097148k SSFS
> [ 7.499478] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
> [ 7.607450] systemd-udevd[399]: starting version 204
> [ 7.619836] EXT4-fs (sda3): mounted filesystem with ordered data mode.
> Opts: (null)
> [ 7.629983] lp: driver loaded but no devices found
> [ 7.637946] ppdev: user-space parallel port driver
> [ 7.647449] wmi: Mapper loaded
> [ 7.647894] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 7.655187] [drm] Initialized drm 1.1.0 20060810
> [ 7.664060] ACPI Warning: SystemIO range
> 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion
> 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20140424/utaddress-258)
> [ 7.664067] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 7.672812] MCE: In-kernel MCE decoding enabled.
> [ 7.674623] EDAC MC: Ver: 3.0.0
> [ 7.675757] checking generic (fb000000 130000) vs hw (d0000000 10000000)
> [ 7.675759] checking generic (fb000000 130000) vs hw (fa000000 2000000)
> [ 7.675761] fb: switching to nouveaufb from VESA VGA
> [ 7.675782] Console: switching to colour dummy device 80x25
> [ 7.675981] AMD64 EDAC driver v3.4.0
> [ 7.676002] EDAC amd64: DRAM ECC disabled.
> [ 7.676008] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
> module will not load.
> [ 7.676008] Either enable ECC checking or force module loading by
> setting 'ecc_enable_override'.
> [ 7.676008] (Note that use of the override may cause unknown side
> effects.)
> [ 7.676119] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x298280a2
> [ 7.676122] nouveau [ DEVICE][0000:01:00.0] Chipset: G98 (NV98)
> [ 7.676123] nouveau [ DEVICE][0000:01:00.0] Family : NV50
> [ 7.676213] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for
> image...
> [ 7.693108] AVX version of gcm_enc/dec engaged.
> [ 7.712757] kvm: Nested Virtualization enabled
> [ 7.712762] kvm: Nested Paging enabled
> [ 7.733822] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
> [ 7.733823] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
> [ 7.733905] nouveau [ VBIOS][0000:01:00.0] BIT signature found
> [ 7.733908] nouveau [ VBIOS][0000:01:00.0] version 70.18.36.00.00
> [ 7.754325] nouveau 0000:01:00.0: irq 49 for MSI/MSI-X
> [ 7.754335] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
> [ 7.754358] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
> [ 7.754360] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
> [ 7.754361] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
> [ 7.764707] sound hdaudioC0D0: autoconfig: line_outs=1
> (0x14/0x0/0x0/0x0/0x0) type:line
> [ 7.764710] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 7.764712] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> [ 7.764713] sound hdaudioC0D0: mono: mono_out=0x0
> [ 7.764714] sound hdaudioC0D0: dig-out=0x1e/0x0
> [ 7.764715] sound hdaudioC0D0: inputs:
> [ 7.764717] sound hdaudioC0D0: Front Mic=0x19
> [ 7.764718] sound hdaudioC0D0: Rear Mic=0x18
> [ 7.764719] sound hdaudioC0D0: Line=0x1a
> [ 7.777512] input: HDA ATI SB Rear Mic as
> /devices/pci0000:00/0000:00:14.2/sound/card0/input7
> [ 7.779263] input: HDA ATI SB Line as
> /devices/pci0000:00/0000:00:14.2/sound/card0/input8
> [ 7.779485] input: HDA ATI SB Line Out as
> /devices/pci0000:00/0000:00:14.2/sound/card0/input9
> [ 7.784065] nouveau [ PTHERM][0000:01:00.0] FAN control: none /
> external
> [ 7.784077] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
> [ 7.784079] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
> [ 7.784087] nouveau [ CLK][0000:01:00.0] 0f: core 550 MHz shader
> 1375 MHz memory 266 MHz
> [ 7.784121] nouveau [ CLK][0000:01:00.0] --: core 566 MHz shader
> 1400 MHz memory 265 MHz
> [ 7.784167] nouveau E[ PDISP][0000:01:00.0] 02:0261: func 08 lookup
> failed, -2
> [ 7.784558] [TTM] Zone kernel: Available graphics memory: 4079904 kiB
> [ 7.784560] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
> [ 7.784561] [TTM] Initializing pool allocator
> [ 7.784567] [TTM] Initializing DMA pool allocator
> [ 7.784584] nouveau [ DRM] VRAM: 1024 MiB
> [ 7.784586] nouveau [ DRM] GART: 1048576 MiB
> [ 7.784590] nouveau [ DRM] TMDS table version 2.0
> [ 7.784593] nouveau [ DRM] DCB version 4.0
> [ 7.784596] nouveau [ DRM] DCB outp 00: 02000300 00000028
> [ 7.784599] nouveau [ DRM] DCB outp 01: 01000302 00020030
> [ 7.784601] nouveau [ DRM] DCB outp 02: 04011310 00000028
> [ 7.784603] nouveau [ DRM] DCB outp 03: 02022322 00c20090
> [ 7.784605] nouveau [ DRM] DCB conn 00: 00001030
> [ 7.784608] nouveau [ DRM] DCB conn 01: 00000100
> [ 7.784610] nouveau [ DRM] DCB conn 02: 00002261
> [ 7.790697] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 7.790699] [drm] Driver supports precise vblank timestamp query.
> [ 7.799009] nouveau [ DRM] MM: using M2MF for buffer copies
> [ 7.811344] cfg80211: Calling CRDA to update world regulatory domain
> [ 7.833323] cfg80211: World regulatory domain updated:
> [ 7.833326] cfg80211: DFS Master region: unset
> [ 7.833327] cfg80211: (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp), (dfs_cac_time)
> [ 7.833330] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300
> mBi, 2000 mBm), (N/A)
> [ 7.833331] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300
> mBi, 2000 mBm), (N/A)
> [ 7.833333] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300
> mBi, 2000 mBm), (N/A)
> [ 7.833335] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300
> mBi, 2000 mBm), (N/A)
> [ 7.833336] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300
> mBi, 2000 mBm), (N/A)
> [ 7.860841] init: failsafe main process (660) killed by TERM signal
> [ 7.869101] nouveau [ DRM] allocated 1360x768 fb: 0x60000, bo
> ffff8800cadfe000
> [ 7.869168] fbcon: nouveaufb (fb0) is primary device
> [ 7.870010] nouveau E[ DEVINIT][0000:01:00.0] unable to compute
> acceptable pll values
> [ 7.870012] nouveau E[ DEVINIT][0000:01:00.0] failed pll calculation
> [ 7.925743] Bluetooth: Core ver 2.19
> [ 7.925758] NET: Registered protocol family 31
> [ 7.925759] Bluetooth: HCI device and connection manager initialized
> [ 7.925765] Bluetooth: HCI socket layer initialized
> [ 7.925767] Bluetooth: L2CAP socket layer initialized
> [ 7.925780] Bluetooth: SCO socket layer initialized
> [ 7.928636] Bluetooth: RFCOMM TTY layer initialized
> [ 7.928640] Bluetooth: RFCOMM socket layer initialized
> [ 7.928644] Bluetooth: RFCOMM ver 1.11
> [ 7.934949] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 7.934949] Bluetooth: BNEP filters: protocol multicast
> [ 7.934954] Bluetooth: BNEP socket layer initialized
> [ 7.936155] usb 2-2: reset high-speed USB device number 2 using ehci-pci
> [ 7.938438] init: cups main process (727) killed by HUP signal
> [ 7.938443] init: cups main process ended, respawning
> [ 8.070645] ieee80211 phy0: Selected rate control algorithm
> 'minstrel_ht'
> [ 8.070835] zd1211rw 2-2:1.0: phy0
> [ 8.070858] usbcore: registered new interface driver zd1211rw
> [ 8.096090] Console: switching to colour frame buffer device 170x48
> [ 8.096656] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
> [ 8.096657] nouveau 0000:01:00.0: registered panic notifier
> [ 8.108042] random: nonblocking pool is initialized
> [ 8.115300] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0
> on minor 0
> [ 8.286280] r8169 0000:02:00.0 p7p1: link down
> [ 8.286309] IPv6: ADDRCONF(NETDEV_UP): p7p1: link is not ready
> [ 8.403879] r8169 0000:05:00.0 p10p1: link down
> [ 8.403918] IPv6: ADDRCONF(NETDEV_UP): p10p1: link is not ready
> [ 8.443017] zd1211rw 2-2:1.0: firmware version 4725
> [ 8.462399] vboxdrv: module verification failed: signature and/or
> required key missing - tainting kernel
> [ 8.465366] vboxdrv: Found 8 processor cores.
> [ 8.465801] vboxdrv: fAsync=0 offMin=0x529 offMax=0x3ee0
> [ 8.465893] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
> 'normal'.
> [ 8.465894] vboxdrv: Successfully loaded version 4.3.20 (interface
> 0x001a0008).
> [ 8.483055] zd1211rw 2-2:1.0: zd1211b chip 0ace:1215 v4810 high
> 00-02-72 AL2230_RF pa0 g--NS
> [ 8.519323] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 8.519353] cfg80211: Calling CRDA for country: DE
> [ 8.521334] cfg80211: Regulatory domain changed to country: DE
> [ 8.521336] cfg80211: DFS Master region: unset
> [ 8.521337] cfg80211: (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp), (dfs_cac_time)
> [ 8.521339] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A,
> 2000 mBm), (N/A)
> [ 8.521340] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A,
> 2000 mBm), (N/A)
> [ 8.521342] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A,
> 2000 mBm), (0 s)
> [ 8.521343] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A,
> 2698 mBm), (0 s)
> [ 8.521344] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz),
> (N/A, 4000 mBm), (N/A)
> [ 8.671967] vboxpci: IOMMU not found (not registered)
> [ 9.153486] init: plymouth-upstart-bridge main process ended, respawning
> [ 9.407531] wlan0: authenticate with 5a:98:26:49:92:24
> [ 9.433096] wlan0: send auth to 5a:98:26:49:92:24 (try 1/3)
> [ 9.434594] wlan0: authenticated
> [ 9.436876] wlan0: associate with 5a:98:26:49:92:24 (try 1/3)
> [ 9.443353] wlan0: RX AssocResp from 5a:98:26:49:92:24 (capab=0x411
> status=0 aid=2)
> [ 9.443853] wlan0: associated
> [ 9.443881] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [ 10.655128] floppy0: no floppy controllers found
>
>
> 2015-06-11 20:52 GMT-03:00 Andre Campos Rodovalho <
> andre.rodovalho at gmail.com>:
>
>> Hi, the boot does not fail, I belive... I can turn on and off the
>> computer, I can access it throught SSH and even VNC. The computer is
>> functinal, but screen is blank/black. My monitor says something like
>> "invalid format" or "invalid input"...
>>
>> Tnx
>>
>> -----------------------------------------------------------------------------------------
>>
>> Jun 11 20:16:58 v-caps rsyslogd: [origin software="rsyslogd"
>> swVersion="7.4.4" x-pid="662" x-info="http://www.rsyslog.com"] start
>> Jun 11 20:16:58 v-caps rsyslogd: rsyslogd's groupid changed to 104
>> Jun 11 20:16:58 v-caps rsyslogd: rsyslogd's userid changed to 101
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Initializing cgroup subsys
>> cpuset
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Initializing cgroup subsys
>> cpu
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Initializing cgroup subsys
>> cpuacct
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Linux version
>> 3.16.0-38-generic (buildd at allspice) (gcc version 4.8.2 (Ubuntu
>> 4.8.2-19ubuntu1) ) #52~14.04.1-Ubuntu SMP Fri May 8 09:43:57 UTC 2015
>> (Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10)
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Command line:
>> BOOT_IMAGE=/boot/vmlinuz-3.16.0-38-generic root=/dev/sda2 ro
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] KERNEL supported cpus:
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Intel GenuineIntel
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] AMD AuthenticAMD
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Centaur CentaurHauls
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] e820: BIOS-provided
>> physical RAM map:
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem
>> 0x0000000000000000-0x000000000009dbff] usable
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem
>> 0x000000000009dc00-0x000000000009ffff] reserved
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem
>> 0x00000000000e6000-0x00000000000fffff] reserved
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem
>> 0x0000000000100000-0x00000000cff9ffff] usable
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem
>> 0x00000000cffa0000-0x00000000cffaffff] ACPI data
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem
>> 0x00000000cffb0000-0x00000000cffdffff] ACPI NVS
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem
>> 0x00000000cffe0000-0x00000000cfffffff] reserved
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem
>> 0x00000000ffe00000-0x00000000ffffffff] reserved
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BIOS-e820: [mem
>> 0x0000000100000000-0x000000022effffff] usable
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] NX (Execute Disable)
>> protection: active
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] SMBIOS 2.6 present.
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] DMI: To Be Filled By O.E.M.
>> To Be Filled By O.E.M./980DE3/U3S3, BIOS P1.60 05/06/2014
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] e820: update [mem
>> 0x00000000-0x00000fff] usable ==> reserved
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] e820: remove [mem
>> 0x000a0000-0x000fffff] usable
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] AGP: No AGP bridge found
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] e820: last_pfn = 0x22f000
>> max_arch_pfn = 0x400000000
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] MTRR default type:
>> uncachable
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] MTRR fixed ranges enabled:
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 00000-9FFFF write-back
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] A0000-EFFFF uncachable
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] F0000-FFFFF write-protect
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] MTRR variable ranges
>> enabled:
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 0 base 000000000000 mask
>> FFFF80000000 write-back
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 1 base 000080000000 mask
>> FFFFC0000000 write-back
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 2 base 0000C0000000 mask
>> FFFFF0000000 write-back
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 3 disabled
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 4 disabled
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 5 disabled
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 6 disabled
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] 7 disabled
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] TOM2: 000000022f000000 aka
>> 8944M
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] x86 PAT enabled: cpu 0, old
>> 0x7040600070406, new 0x7010600070106
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] e820: update [mem
>> 0xd0000000-0xffffffff] usable ==> reserved
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] e820: last_pfn = 0xcffa0
>> max_arch_pfn = 0x400000000
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] found SMP MP-table at [mem
>> 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Scanning 1 areas for low
>> memory corruption
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Base memory trampoline at
>> [ffff880000097000] 97000 size 24576
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Using GB pages for direct
>> mapping
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] init_memory_mapping: [mem
>> 0x00000000-0x000fffff]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem
>> 0x00000000-0x000fffff] page 4k
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BRK [0x01fbd000,
>> 0x01fbdfff] PGTABLE
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BRK [0x01fbe000,
>> 0x01fbefff] PGTABLE
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BRK [0x01fbf000,
>> 0x01fbffff] PGTABLE
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] init_memory_mapping: [mem
>> 0x22ee00000-0x22effffff]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem
>> 0x22ee00000-0x22effffff] page 2M
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] BRK [0x01fc0000,
>> 0x01fc0fff] PGTABLE
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] init_memory_mapping: [mem
>> 0x22c000000-0x22edfffff]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem
>> 0x22c000000-0x22edfffff] page 2M
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] init_memory_mapping: [mem
>> 0x200000000-0x22bffffff]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem
>> 0x200000000-0x22bffffff] page 2M
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] init_memory_mapping: [mem
>> 0x00100000-0xcff9ffff]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem
>> 0x00100000-0x001fffff] page 4k
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem
>> 0x00200000-0x3fffffff] page 2M
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem
>> 0x40000000-0xbfffffff] page 1G
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem
>> 0xc0000000-0xcfdfffff] page 2M
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem
>> 0xcfe00000-0xcff9ffff] page 4k
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] init_memory_mapping: [mem
>> 0x100000000-0x1ffffffff]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] [mem
>> 0x100000000-0x1ffffffff] page 1G
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] RAMDISK: [mem
>> 0x35a96000-0x36d42fff]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: Early table checksum
>> verification disabled
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: RSDP
>> 0x00000000000FB6C0 000014 (v00 ACPIAM)
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: RSDT
>> 0x00000000CFFA0000 000040 (v01 050614 RSDT1213 20140506 MSFT 00000097)
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: FACP
>> 0x00000000CFFA0200 000084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097)
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI BIOS Warning (bug):
>> Optional FADT field Pm2ControlBlock has zero address or length:
>> 0x0000000000000000/0x1 (20140424/tbfadt-649)
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: DSDT
>> 0x00000000CFFA0460 0088B0 (v01 AS636 AS636152 00000152 INTL 20051117)
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: FACS
>> 0x00000000CFFB0000 000040
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: APIC
>> 0x00000000CFFA0390 00008C (v01 050614 APIC1213 20140506 MSFT 00000097)
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: MCFG
>> 0x00000000CFFA0420 00003C (v01 050614 OEMMCFG 20140506 MSFT 00000097)
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: OEMB
>> 0x00000000CFFB0040 000072 (v01 050614 OEMB1213 20140506 MSFT 00000097)
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: AAFT
>> 0x00000000CFFAA460 000027 (v01 050614 OEMAAFT 20140506 MSFT 00000097)
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: HPET
>> 0x00000000CFFAA490 000038 (v01 050614 OEMHPET 20140506 MSFT 00000097)
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: SSDT
>> 0x00000000CFFAA4D0 001714 (v01 A M I POWERNOW 00000001 AMD 00000001)
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] ACPI: Local APIC address
>> 0xfee00000
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] No NUMA configuration found
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Faking a node at [mem
>> 0x0000000000000000-0x000000022effffff]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Initmem setup node 0 [mem
>> 0x00000000-0x22effffff]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] NODE_DATA [mem
>> 0x22eff9000-0x22effdfff]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000]
>> [ffffea0000000000-ffffea0008bfffff] PMD ->
>> [ffff880226600000-ffff88022e5fffff] on node 0
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Zone ranges:
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] DMA [mem
>> 0x00001000-0x00ffffff]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] DMA32 [mem
>> 0x01000000-0xffffffff]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Normal [mem
>> 0x100000000-0x22effffff]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Movable zone start for each
>> node
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] Early memory node ranges
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] node 0: [mem
>> 0x00001000-0x0009cfff]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] node 0: [mem
>> 0x00100000-0xcff9ffff]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] node 0: [mem
>> 0x100000000-0x22effffff]
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] On node 0 totalpages:
>> 2092860
>> Jun 11 20:16:58 v-caps kernel: [ 0.000000] DMA zone: 64 pages used
>> for memmap
>> Jun 11 20:16:58 v-caps kernel
>>
>
> _______________________________________________
> Nouveau mailing list
> Nouveau at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/nouveau
>
> ...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20150612/2789c6f6/attachment-0001.html>
More information about the Nouveau
mailing list