[Nouveau] [PATCH] nv50/ir: only enable mul saturate on G200+

[Pierre Moreau]

Tested-by: Pierre Moreau <pierre.morrow at free.fr>

----- Mail original -----
> Commit 44673512a84 enabled support for saturating fmul. However
> experimentally this does not seem to work on the older chips.
> Restrict
> the feature to G200 (NVA0) and later.
> 
> Reported-by: Pierre Moreau <pierre.morrow at free.fr>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90350
> Signed-off-by: Ilia Mirkin <imirkin at alum.mit.edu>
> Cc: mesa-stable at lists.freedesktop.org
> ---
>  src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp | 5
>  ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git
> a/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp
> b/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp
> index 70180eb..ca545a6 100644
> --- a/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp
> +++ b/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp
> @@ -84,7 +84,7 @@ static const struct opProperties _initProps[] =
>     //           neg  abs  not  sat  c[]  s[], a[], imm
>     { OP_ADD,    0x3, 0x0, 0x0, 0x8, 0x2, 0x1, 0x1, 0x2 },
>     { OP_SUB,    0x3, 0x0, 0x0, 0x8, 0x2, 0x1, 0x1, 0x2 },
> -   { OP_MUL,    0x3, 0x0, 0x0, 0x8, 0x2, 0x1, 0x1, 0x2 },
> +   { OP_MUL,    0x3, 0x0, 0x0, 0x0, 0x2, 0x1, 0x1, 0x2 },
>     { OP_MAX,    0x3, 0x3, 0x0, 0x0, 0x2, 0x1, 0x1, 0x0 },
>     { OP_MIN,    0x3, 0x3, 0x0, 0x0, 0x2, 0x1, 0x1, 0x0 },
>     { OP_MAD,    0x7, 0x0, 0x0, 0x8, 0x6, 0x1, 0x1, 0x0 }, // special
>     constraint
> @@ -188,6 +188,9 @@ void TargetNV50::initOpInfo()
>        if (prop->mSat & 8)
>           opInfo[prop->op].dstMods = NV50_IR_MOD_SAT;
>     }
> +
> +   if (chipset >= 0xa0)
> +      opInfo[OP_MUL].dstMods = NV50_IR_MOD_SAT;
>  }
>  
>  unsigned int
> --
> 2.3.6
> 
> _______________________________________________
> Nouveau mailing list
> Nouveau at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/nouveau
>