[Nouveau] [PATCH 1/2] disp: activate dual link TMDS links only when possible

[Ilia Mirkin]

From: Hauke Mehrtens <hauke at hauke-m.de>

Without this patch a pixel clock rate above 165 MHz on a TMDS link is
assumed to be dual link. This is true for DVI, but not for HDMI. HDMI
supports no dual link, but it supports pixel clock rates above 165 MHz.
Only activate Dual Link mode when it is actual possible.

Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
Signed-off-by: Ilia Mirkin <imirkin at alum.mit.edu>
---
 drm/nouveau/nv50_display.c           | 8 ++++----
 drm/nouveau/nvkm/engine/disp/gf119.c | 2 +-
 drm/nouveau/nvkm/engine/disp/nv50.c  | 2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drm/nouveau/nv50_display.c b/drm/nouveau/nv50_display.c
index c053c50..93bcfdf 100644
--- a/drm/nouveau/nv50_display.c
+++ b/drm/nouveau/nv50_display.c
@@ -1961,10 +1961,10 @@ nv50_sor_mode_set(struct drm_encoder *encoder, struct drm_display_mode *umode,
 	switch (nv_encoder->dcb->type) {
 	case DCB_OUTPUT_TMDS:
 		if (nv_encoder->dcb->sorconf.link & 1) {
-			if (mode->clock < 165000)
-				proto = 0x1;
-			else
-				proto = 0x5;
+			proto = 0x1;
+			if (mode->clock >= 165000 &&
+			    nv_encoder->dcb->duallink_possible)
+				proto |= 0x4;
 		} else {
 			proto = 0x2;
 		}
diff --git a/drm/nouveau/nvkm/engine/disp/gf119.c b/drm/nouveau/nvkm/engine/disp/gf119.c
index 186fd3a..8691b68 100644
--- a/drm/nouveau/nvkm/engine/disp/gf119.c
+++ b/drm/nouveau/nvkm/engine/disp/gf119.c
@@ -158,7 +158,7 @@ exec_clkcmp(struct nv50_disp *disp, int head, int id, u32 pclk, u32 *conf)
 	switch (outp->info.type) {
 	case DCB_OUTPUT_TMDS:
 		*conf = (ctrl & 0x00000f00) >> 8;
-		if (pclk >= 165000)
+		if (pclk >= 165000 && outp->info.duallink_possible)
 			*conf |= 0x0100;
 		break;
 	case DCB_OUTPUT_LVDS:
diff --git a/drm/nouveau/nvkm/engine/disp/nv50.c b/drm/nouveau/nvkm/engine/disp/nv50.c
index 32e73a9..ceecd0e 100644
--- a/drm/nouveau/nvkm/engine/disp/nv50.c
+++ b/drm/nouveau/nvkm/engine/disp/nv50.c
@@ -391,7 +391,7 @@ exec_clkcmp(struct nv50_disp *disp, int head, int id, u32 pclk, u32 *conf)
 		switch (outp->info.type) {
 		case DCB_OUTPUT_TMDS:
 			*conf = (ctrl & 0x00000f00) >> 8;
-			if (pclk >= 165000)
+			if (pclk >= 165000 && outp->info.duallink_possible)
 				*conf |= 0x0100;
 			break;
 		case DCB_OUTPUT_LVDS:
-- 
2.4.10