[Nouveau] [PATCH v2 0/2] drm/nouveau: add support for 2560x1440 at 56 over HDMI

[Hauke Mehrtens]

These patches are adding support for outputting 2560x1440 at 56 over HDMI.
This needs a pixel clock of 225 MHz which was not supported before.

This was tested in a dual monitor setup with a GF114 (GTX 560 TI) and
one HDMI monitor running with 2560x1440 at 56 and one DVI monitor running
with 1920x1200 at 60. This still needs testing on other graphics cards and
with dual link DVI.

There is no Maintainers entry for nouveau.

This is based on top of Linux 4.3-rc4. I am not used to the process
uses by nouveau developers and I hope this is the correct way to get
this patch into upstream Linux.

changes since v1:
 * rebase on 4.3-rc4
 * update commit message
 
Hauke Mehrtens (2):
  drm/nouveau: activate dual link TMDS links only when possible
  drm/nouveau: increase max pixel clock to 225 MHZ for HDMI

 drivers/gpu/drm/nouveau/nouveau_connector.c      | 6 ++++--
 drivers/gpu/drm/nouveau/nv50_display.c           | 8 ++++----
 drivers/gpu/drm/nouveau/nvkm/engine/disp/gf119.c | 2 +-
 drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.c  | 2 +-
 4 files changed, 10 insertions(+), 8 deletions(-)

-- 
2.1.4