[Nouveau] [PATCH 1/2] volt: save the voltage range we are able to set

[Karol Herbst]

From: Karol Herbst <nouveau at karolherbst.de>

We shouldn't set voltages below the min or above the max voltage the gpu is
able to set, so save the range.

Signed-off-by: Karol Herbst <nouveau at karolherbst.de>
Reviewed-by: Martin Peres <martin.peres at free.fr>
Tested-by: Pierre Moreau <pierre.morrow at free.fr>
Signed-off-by: Karol Herbst <karolherbst at gmail.com>
---
 drm/nouveau/include/nvkm/subdev/volt.h |  3 +++
 drm/nouveau/nvkm/subdev/volt/base.c    | 14 +++++++++++++-
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drm/nouveau/include/nvkm/subdev/volt.h b/drm/nouveau/include/nvkm/subdev/volt.h
index feff55c..b765f4f 100644
--- a/drm/nouveau/include/nvkm/subdev/volt.h
+++ b/drm/nouveau/include/nvkm/subdev/volt.h
@@ -12,6 +12,9 @@ struct nvkm_volt {
 		u32 uv;
 		u8 vid;
 	} vid[256];
+
+	u32 max_uv;
+	u32 min_uv;
 };
 
 int nvkm_volt_get(struct nvkm_volt *);
diff --git a/drm/nouveau/nvkm/subdev/volt/base.c b/drm/nouveau/nvkm/subdev/volt/base.c
index 6b2d753..1c3d23b 100644
--- a/drm/nouveau/nvkm/subdev/volt/base.c
+++ b/drm/nouveau/nvkm/subdev/volt/base.c
@@ -120,6 +120,8 @@ nvkm_volt_parse_bios(struct nvkm_bios *bios, struct nvkm_volt *volt)
 
 	data = nvbios_volt_parse(bios, &ver, &hdr, &cnt, &len, &info);
 	if (data && info.vidmask && info.base && info.step) {
+		volt->min_uv = info.min;
+		volt->max_uv = info.max;
 		for (i = 0; i < info.vidmask + 1; i++) {
 			if (info.base >= info.min &&
 				info.base <= info.max) {
@@ -131,6 +133,8 @@ nvkm_volt_parse_bios(struct nvkm_bios *bios, struct nvkm_volt *volt)
 		}
 		volt->vid_mask = info.vidmask;
 	} else if (data && info.vidmask) {
+		volt->min_uv = 0xffffffff;
+		volt->max_uv = 0;
 		for (i = 0; i < cnt; i++) {
 			data = nvbios_volt_entry_parse(bios, i, &ver, &hdr,
 						       &ivid);
@@ -138,9 +142,14 @@ nvkm_volt_parse_bios(struct nvkm_bios *bios, struct nvkm_volt *volt)
 				volt->vid[volt->vid_nr].uv = ivid.voltage;
 				volt->vid[volt->vid_nr].vid = ivid.vid;
 				volt->vid_nr++;
+				volt->min_uv = min(volt->min_uv, ivid.voltage);
+				volt->max_uv = max(volt->max_uv, ivid.voltage);
 			}
 		}
 		volt->vid_mask = info.vidmask;
+	} else if (data && info.type == NVBIOS_VOLT_PWM) {
+		volt->min_uv = info.base;
+		volt->max_uv = info.base + info.pwm_range;
 	}
 }
 
@@ -181,8 +190,11 @@ nvkm_volt_ctor(const struct nvkm_volt_func *func, struct nvkm_device *device,
 	volt->func = func;
 
 	/* Assuming the non-bios device should build the voltage table later */
-	if (bios)
+	if (bios) {
 		nvkm_volt_parse_bios(bios, volt);
+		nvkm_debug(&volt->subdev, "min: %iuv max: %iuv\n",
+			   volt->min_uv, volt->max_uv);
+	}
 
 	if (volt->vid_nr) {
 		for (i = 0; i < volt->vid_nr; i++) {
-- 
2.8.1