[Nouveau] [PATCH v5 10/20] volt: Add temperature parameter to nvkm_volt_map

[Karol Herbst]

The voltage entries actually may map to a different voltage depending on
the current temperature.

v2: Only read the temperature when actually needed.
v5: Be smarter about using max().
    Don't read the temperature anymore.

Signed-off-by: Karol Herbst <karolherbst at gmail.com>
Reviewed-by: Martin Peres <martin.peres at free.fr>
---
 drm/nouveau/include/nvkm/subdev/volt.h |  3 ++-
 drm/nouveau/nvkm/subdev/clk/base.c     |  4 ++--
 drm/nouveau/nvkm/subdev/volt/base.c    | 12 +++++++-----
 3 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/drm/nouveau/include/nvkm/subdev/volt.h b/drm/nouveau/include/nvkm/subdev/volt.h
index 06d4593..6fd933d 100644
--- a/drm/nouveau/include/nvkm/subdev/volt.h
+++ b/drm/nouveau/include/nvkm/subdev/volt.h
@@ -29,7 +29,8 @@ struct nvkm_volt {
 
 int nvkm_volt_map_min(struct nvkm_volt *volt, u8 id);
 int nvkm_volt_get(struct nvkm_volt *);
-int nvkm_volt_set_id(struct nvkm_volt *, u8 id, u8 min_id, int condition);
+int nvkm_volt_set_id(struct nvkm_volt *, u8 id, u8 min_id, u8 temp,
+		     int condition);
 
 int nv40_volt_new(struct nvkm_device *, int, struct nvkm_volt **);
 int gk104_volt_new(struct nvkm_device *, int, struct nvkm_volt **);
diff --git a/drm/nouveau/nvkm/subdev/clk/base.c b/drm/nouveau/nvkm/subdev/clk/base.c
index 88a517c..98168be 100644
--- a/drm/nouveau/nvkm/subdev/clk/base.c
+++ b/drm/nouveau/nvkm/subdev/clk/base.c
@@ -100,7 +100,7 @@ nvkm_cstate_prog(struct nvkm_clk *clk, struct nvkm_pstate *pstate, int cstatei)
 
 	if (volt) {
 		ret = nvkm_volt_set_id(volt, cstate->voltage,
-				       pstate->base.voltage, +1);
+				       pstate->base.voltage, clk->temp, +1);
 		if (ret && ret != -ENODEV) {
 			nvkm_error(subdev, "failed to raise voltage: %d\n", ret);
 			return ret;
@@ -115,7 +115,7 @@ nvkm_cstate_prog(struct nvkm_clk *clk, struct nvkm_pstate *pstate, int cstatei)
 
 	if (volt) {
 		ret = nvkm_volt_set_id(volt, cstate->voltage,
-				       pstate->base.voltage, -1);
+				       pstate->base.voltage, clk->temp, -1);
 		if (ret && ret != -ENODEV)
 			nvkm_error(subdev, "failed to lower voltage: %d\n", ret);
 	}
diff --git a/drm/nouveau/nvkm/subdev/volt/base.c b/drm/nouveau/nvkm/subdev/volt/base.c
index 960505b..40ba088 100644
--- a/drm/nouveau/nvkm/subdev/volt/base.c
+++ b/drm/nouveau/nvkm/subdev/volt/base.c
@@ -26,6 +26,7 @@
 #include <subdev/bios.h>
 #include <subdev/bios/vmap.h>
 #include <subdev/bios/volt.h>
+#include <subdev/therm.h>
 
 int
 nvkm_volt_get(struct nvkm_volt *volt)
@@ -88,7 +89,7 @@ nvkm_volt_map_min(struct nvkm_volt *volt, u8 id)
 }
 
 static int
-nvkm_volt_map(struct nvkm_volt *volt, u8 id)
+nvkm_volt_map(struct nvkm_volt *volt, u8 id, u8 temp)
 {
 	struct nvkm_bios *bios = volt->subdev.device->bios;
 	struct nvbios_vmap_entry info;
@@ -98,7 +99,7 @@ nvkm_volt_map(struct nvkm_volt *volt, u8 id)
 	vmap = nvbios_vmap_entry_parse(bios, id, &ver, &len, &info);
 	if (vmap) {
 		if (info.link != 0xff) {
-			int ret = nvkm_volt_map(volt, info.link);
+			int ret = nvkm_volt_map(volt, info.link, temp);
 			if (ret < 0)
 				return ret;
 			info.min += ret;
@@ -110,20 +111,21 @@ nvkm_volt_map(struct nvkm_volt *volt, u8 id)
 }
 
 int
-nvkm_volt_set_id(struct nvkm_volt *volt, u8 id, u8 min_id, int condition)
+nvkm_volt_set_id(struct nvkm_volt *volt, u8 id, u8 min_id, u8 temp,
+		 int condition)
 {
 	int ret;
 
 	if (volt->func->set_id)
 		return volt->func->set_id(volt, id, condition);
 
-	ret = nvkm_volt_map(volt, id);
+	ret = nvkm_volt_map(volt, id, temp);
 	if (ret >= 0) {
 		int prev = nvkm_volt_get(volt);
 		if (!condition || prev < 0 ||
 		    (condition < 0 && ret < prev) ||
 		    (condition > 0 && ret > prev)) {
-			int min = nvkm_volt_map(volt, min_id);
+			int min = nvkm_volt_map(volt, min_id, temp);
 			if (min >= 0)
 				ret = max(min, ret);
 			ret = nvkm_volt_set(volt, ret);
-- 
2.9.2