[Nouveau] GM108GLM?
Sune Mølgaard
smo at translucent.dk
Wed Dec 7 09:26:44 UTC 2016
Hi again,
It works :-)
Reclocking, however, is another kettle of fish.
Trying #echo 0f > /sys/kernel/debug/dri/0/pstate hangs X.
Trying the same with no X running reveals:
Dec 7 10:08:42 dell-smo kernel: [ 728.831020] nouveau 0000:08:00.0:
clk: unable to find matching pll values
a number of time as then soft lockup.
Very much akin to
https://people.freedesktop.org/~cbrill/dri-log/?channel=nouveau&date=2016-04-14
, actually, so what I gather from that is that I need to provide you
guys with some info about the card, so which do you need, and how do I
extract them?
Best regards,
Sune Mølgaard
On 2016-10-27 11:06, Pierre Moreau wrote:
> Hello,
>
> The idea was to use the modesetting DDX instead of Nouveau’s one for Maxwell+
> as EXA was [broken][1]. But you can give a try at Ilia’s [patches][2], which
> fix the Nouveau DDX for GM10x and GM20x (I don’t think it has been tested on a
> GM108 yet).
>
> Best regards,
> Pierre Moreau
>
> [1]: https://cgit.freedesktop.org/nouveau/xf86-video-nouveau/commit/?id=3e2e0faa2ee1cce9c1bb5c7ad80d0592460f3edc
> [2]: https://github.com/imirkin/xf86-video-nouveau/
>
>
> On 11:29 am - Oct 18 2016, Sune Mølgaard wrote:
>> Hi,
>>
>> It would seem like it (attachments are from 4.9-rc1, btw), but it
>> doesn't look like there is any support in the Xorg driver.
>>
>> How can I help with that?
>>
>> Best regards,
>>
>> Sune Mølgaard
>> Translucent ApS
>>
>> On 2016-04-22 09:33, Pierre Moreau wrote:
>>> Hello,
>>>
>>> A patch was merged yesterday to recognise GM108 (see
>>> https://github.com/skeggsb/nouveau/commit/3da1f2a19e5e8dc8d68a4400d9cca01c64ecd59e).
>>> I guess it will make it into 4.7.
>>>
>>> Pierre
>>
>
>> lspci -vvvv
>> 00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
>> Subsystem: Lenovo Broadwell-U Host Bridge -OPI
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>> Latency: 0
>> Capabilities: <access denied>
>> Kernel driver in use: bdw_uncore
>>
>> 00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09) (prog-if 00 [VGA controller])
>> Subsystem: Lenovo Broadwell-U Integrated Graphics
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>> Interrupt: pin A routed to IRQ 49
>> Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=16M]
>> Region 2: Memory at c0000000 (64-bit, prefetchable) [size=512M]
>> Region 4: I/O ports at 4000 [size=64]
>> [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
>> Capabilities: <access denied>
>> Kernel driver in use: i915
>> Kernel modules: i915
>>
>> 00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
>> Subsystem: Lenovo Broadwell-U Audio Controller
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin A routed to IRQ 50
>> Region 0: Memory at f4230000 (64-bit, non-prefetchable) [size=16K]
>> Capabilities: <access denied>
>> Kernel driver in use: snd_hda_intel
>> Kernel modules: snd_hda_intel
>>
>> 00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03) (prog-if 30 [XHCI])
>> Subsystem: Lenovo Wildcat Point-LP USB xHCI Controller
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>> Interrupt: pin A routed to IRQ 42
>> Region 0: Memory at f4220000 (64-bit, non-prefetchable) [size=64K]
>> Capabilities: <access denied>
>> Kernel driver in use: xhci_hcd
>>
>> 00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
>> Subsystem: Lenovo Wildcat Point-LP MEI Controller
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>> Interrupt: pin A routed to IRQ 46
>> Region 0: Memory at f4239000 (64-bit, non-prefetchable) [size=32]
>> Capabilities: <access denied>
>> Kernel driver in use: mei_me
>> Kernel modules: mei_me
>>
>> 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection (3) I218-V (rev 03)
>> Subsystem: Lenovo Ethernet Connection (3) I218-V
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>> Interrupt: pin A routed to IRQ 43
>> Region 0: Memory at f4200000 (32-bit, non-prefetchable) [size=128K]
>> Region 1: Memory at f423e000 (32-bit, non-prefetchable) [size=4K]
>> Region 2: I/O ports at 4080 [size=32]
>> Capabilities: <access denied>
>> Kernel driver in use: e1000e
>> Kernel modules: e1000e
>>
>> 00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
>> Subsystem: Lenovo Wildcat Point-LP High Definition Audio Controller
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 32, Cache Line Size: 64 bytes
>> Interrupt: pin A routed to IRQ 47
>> Region 0: Memory at f4234000 (64-bit, non-prefetchable) [size=16K]
>> Capabilities: <access denied>
>> Kernel driver in use: snd_hda_intel
>> Kernel modules: snd_hda_intel
>>
>> 00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #6 (rev e3) (prog-if 00 [Normal decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin B routed to IRQ 17
>> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>> I/O behind bridge: 0000f000-00000fff
>> Memory behind bridge: f4100000-f41fffff
>> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: <access denied>
>> Kernel driver in use: pcieport
>> Kernel modules: shpchp
>>
>> 00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3) (prog-if 00 [Normal decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin C routed to IRQ 18
>> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>> I/O behind bridge: 0000f000-00000fff
>> Memory behind bridge: f4000000-f40fffff
>> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: <access denied>
>> Kernel driver in use: pcieport
>> Kernel modules: shpchp
>>
>> 00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3) (prog-if 00 [Normal decode])
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin A routed to IRQ 16
>> Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
>> I/O behind bridge: 00003000-00003fff
>> Memory behind bridge: f3000000-f3ffffff
>> Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
>> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>> Capabilities: <access denied>
>> Kernel driver in use: pcieport
>> Kernel modules: shpchp
>>
>> 00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI Controller (rev 03) (prog-if 20 [EHCI])
>> Subsystem: Lenovo Wildcat Point-LP USB EHCI Controller
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>> Interrupt: pin A routed to IRQ 23
>> Region 0: Memory at f423d000 (32-bit, non-prefetchable) [size=1K]
>> Capabilities: <access denied>
>> Kernel driver in use: ehci-pci
>>
>> 00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
>> Subsystem: Lenovo Wildcat Point-LP LPC Controller
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>> Capabilities: <access denied>
>> Kernel driver in use: lpc_ich
>> Kernel modules: lpc_ich
>>
>> 00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03) (prog-if 01 [AHCI 1.0])
>> Subsystem: Lenovo Wildcat Point-LP SATA Controller [AHCI Mode]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>> Interrupt: pin B routed to IRQ 19
>> Region 0: I/O ports at 40a8 [size=8]
>> Region 1: I/O ports at 40b4 [size=4]
>> Region 2: I/O ports at 40a0 [size=8]
>> Region 3: I/O ports at 40b0 [size=4]
>> Region 4: I/O ports at 4060 [size=32]
>> Region 5: Memory at f423c000 (32-bit, non-prefetchable) [size=2K]
>> Capabilities: <access denied>
>> Kernel driver in use: ahci
>> Kernel modules: ahci
>>
>> 00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
>> Subsystem: Lenovo Wildcat Point-LP SMBus Controller
>> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Interrupt: pin C routed to IRQ 10
>> Region 0: Memory at f4238000 (64-bit, non-prefetchable) [size=256]
>> Region 4: I/O ports at efa0 [size=32]
>> Kernel modules: i2c_i801
>>
>> 00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP Thermal Management Controller (rev 03)
>> Subsystem: Lenovo Wildcat Point-LP Thermal Management Controller
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0
>> Interrupt: pin C routed to IRQ 18
>> Region 0: Memory at f423b000 (64-bit, non-prefetchable) [size=4K]
>> Capabilities: <access denied>
>> Kernel driver in use: intel_pch_thermal
>> Kernel modules: intel_pch_thermal
>>
>> 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
>> Subsystem: Lenovo RTS5227 PCI Express Card Reader
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin A routed to IRQ 44
>> Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
>> Capabilities: <access denied>
>> Kernel driver in use: rtsx_pci
>> Kernel modules: rtsx_pci
>>
>> 03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 99)
>> Subsystem: Intel Corporation Dual Band Wireless-AC 7265
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin A routed to IRQ 48
>> Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=8K]
>> Capabilities: <access denied>
>> Kernel driver in use: iwlwifi
>> Kernel modules: iwlwifi
>>
>> 08:00.0 3D controller: NVIDIA Corporation GM108GLM [Quadro K620M] (rev a2)
>> Subsystem: Lenovo GM108GLM [Quadro K620M]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin A routed to IRQ 45
>> Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=16M]
>> Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
>> Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
>> Region 5: I/O ports at 3000 [size=128]
>> Expansion ROM at <ignored> [disabled]
>> Capabilities: <access denied>
>> Kernel driver in use: nouveau
>> Kernel modules: nvidiafb, nouveau
>>
>
>> dmesg |egrep -i "nouveau|nvidia"
>> [ 1.893467] nouveau: detected PR support, will not use DSM
>> [ 1.893677] nouveau 0000:08:00.0: NVIDIA GM108 (1183a0a2)
>> [ 1.907342] nouveau 0000:08:00.0: bios: version 82.08.1f.00.03
>> [ 1.991211] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f (1d408200)
>> [ 1.991212] nouveau 0000:08:00.0: fb: 2048 MiB DDR3
>> [ 3.269352] nouveau 0000:08:00.0: DRM: VRAM: 2048 MiB
>> [ 3.269408] nouveau 0000:08:00.0: DRM: GART: 1048576 MiB
>> [ 3.269465] nouveau 0000:08:00.0: DRM: Pointer to TMDS table invalid
>> [ 3.269523] nouveau 0000:08:00.0: DRM: DCB version 4.0
>> [ 3.269579] nouveau 0000:08:00.0: DRM: Pointer to flat panel table invalid
>> [ 3.451054] nouveau 0000:08:00.0: DRM: MM: using COPY for buffer copies
>> [ 3.451117] [drm] Initialized nouveau 1.3.1 20120801 for 0000:08:00.0 on minor 0
>> [ 8.925115] nouveau 0000:08:00.0: DRM: evicting buffers...
>> [ 8.925189] nouveau 0000:08:00.0: DRM: waiting for kernel channels to go idle...
>> [ 8.925283] nouveau 0000:08:00.0: DRM: suspending client object trees...
>> [ 8.929091] nouveau 0000:08:00.0: DRM: suspending kernel object tree...
>> [ 17.449259] hid_logitech_hidpp hid_logitech_dj usbhid hid crct10dif_pclmul rtsx_pci_sdmmc crc32_pclmul crc32c_intel mmc_core nouveau ghash_clmulni_intel aesni_intel mxm_wmi i2c_algo_bit aes_x86_64 ttm lrw gf128mul glue_helper drm_kms_helper ablk_helper cryptd syscopyarea sysfillrect psmouse sysimgblt fb_sys_fops drm ahci libahci rtsx_pci e1000e ptp pps_core thermal wmi fjes video button
>> [ 18.641499] nouveau 0000:08:00.0: DRM: resuming kernel object tree...
>> [ 18.724503] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f (1f408200)
>> [ 18.761491] nouveau 0000:08:00.0: priv: HUB0: 10ecc0 ffffffff (1d40822c)
>> [ 18.761992] nouveau 0000:08:00.0: DRM: resuming client object trees...
>> [ 26.025637] nouveau 0000:08:00.0: DRM: evicting buffers...
>> [ 26.025639] nouveau 0000:08:00.0: DRM: waiting for kernel channels to go idle...
>> [ 26.025662] nouveau 0000:08:00.0: DRM: suspending client object trees...
>> [ 26.029451] nouveau 0000:08:00.0: DRM: suspending kernel object tree...
>
>> [ 20.874]
>> X.Org X Server 1.18.4
>> Release Date: 2016-07-19
>> [ 20.874] X Protocol Version 11, Revision 0
>> [ 20.874] Build Operating System: Linux 3.13.0-95-generic x86_64 Ubuntu
>> [ 20.874] Current Operating System: Linux dell-smo 4.9.0-040900rc1-generic #201610151630 SMP Sat Oct 15 20:33:39 UTC 2016 x86_64
>> [ 20.874] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-040900rc1-generic root=UUID=a9421b5e-ff3f-4ebd-8f9f-13d24c76ba34 ro cryptopts=target=sda6_crypt,source=/dev/disk/by-uuid/64096e82-f7f4-4917-80df-e123aa15a022,discard vt.handoff=7
>> [ 20.874] Build Date: 14 September 2016 03:33:24PM
>> [ 20.874] xorg-server 2:1.18.4-0ubuntu0.1 (For technical support please see http://www.ubuntu.com/support)
>> [ 20.874] Current version of pixman: 0.33.6
>> [ 20.874] Before reporting problems, check http://wiki.x.org
>> to make sure that you have the latest version.
>> [ 20.874] Markers: (--) probed, (**) from config file, (==) default setting,
>> (++) from command line, (!!) notice, (II) informational,
>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> [ 20.874] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 18 09:21:13 2016
>> [ 20.877] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
>> [ 20.881] (==) No Layout section. Using the first Screen section.
>> [ 20.881] (==) No screen section available. Using defaults.
>> [ 20.881] (**) |-->Screen "Default Screen Section" (0)
>> [ 20.881] (**) | |-->Monitor "<default monitor>"
>> [ 20.882] (==) No monitor specified for screen "Default Screen Section".
>> Using a default monitor configuration.
>> [ 20.882] (==) Automatically adding devices
>> [ 20.882] (==) Automatically enabling devices
>> [ 20.882] (==) Automatically adding GPU devices
>> [ 20.882] (==) Max clients allowed: 256, resource mask: 0x1fffff
>> [ 20.889] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
>> [ 20.889] Entry deleted from font path.
>> [ 20.892] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
>> [ 20.892] Entry deleted from font path.
>> [ 20.893] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
>> [ 20.893] Entry deleted from font path.
>> [ 20.893] (==) FontPath set to:
>> /usr/share/fonts/X11/misc,
>> /usr/share/fonts/X11/100dpi/:unscaled,
>> /usr/share/fonts/X11/Type1,
>> /usr/share/fonts/X11/100dpi,
>> built-ins
>> [ 20.893] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
>> [ 20.893] (II) The server relies on udev to provide the list of input devices.
>> If no devices become available, reconfigure udev or disable AutoAddDevices.
>> [ 20.894] (II) Loader magic: 0x563366d65dc0
>> [ 20.894] (II) Module ABI versions:
>> [ 20.894] X.Org ANSI C Emulation: 0.4
>> [ 20.894] X.Org Video Driver: 20.0
>> [ 20.894] X.Org XInput driver : 22.1
>> [ 20.894] X.Org Server Extension : 9.0
>> [ 20.895] (++) using VT number 7
>>
>> [ 20.895] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
>> [ 20.895] (II) xfree86: Adding drm device (/dev/dri/card1)
>> [ 20.910] (II) xfree86: Adding drm device (/dev/dri/card0)
>> [ 20.912] (--) PCI:*(0:0:2:0) 8086:1616:17aa:2225 rev 9, Mem @ 0xf2000000/16777216, 0xc0000000/536870912, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
>> [ 20.912] (--) PCI: (0:8:0:0) 10de:137a:17aa:2225 rev 162, Mem @ 0xf3000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x00003000/128
>> [ 20.912] (II) LoadModule: "glx"
>> [ 20.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
>> [ 20.980] (II) Module glx: vendor="X.Org Foundation"
>> [ 20.980] compiled for 1.18.4, module version = 1.0.0
>> [ 20.980] ABI class: X.Org Server Extension, version 9.0
>> [ 20.980] (==) AIGLX enabled
>> [ 20.980] (==) Matched intel as autoconfigured driver 0
>> [ 20.980] (==) Matched nvidia as autoconfigured driver 1
>> [ 20.980] (==) Matched nouveau as autoconfigured driver 2
>> [ 20.980] (==) Matched intel as autoconfigured driver 3
>> [ 20.980] (==) Matched modesetting as autoconfigured driver 4
>> [ 20.980] (==) Matched fbdev as autoconfigured driver 5
>> [ 20.980] (==) Matched vesa as autoconfigured driver 6
>> [ 20.980] (==) Assigned the driver to the xf86ConfigLayout
>> [ 20.980] (II) LoadModule: "intel"
>> [ 20.983] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
>> [ 20.988] (II) Module intel: vendor="X.Org Foundation"
>> [ 20.988] compiled for 1.18.4, module version = 2.99.917
>> [ 20.988] Module class: X.Org Video Driver
>> [ 20.988] ABI class: X.Org Video Driver, version 20.0
>> [ 20.988] (II) LoadModule: "nvidia"
>> [ 20.991] (WW) Warning, couldn't open module nvidia
>> [ 20.991] (II) UnloadModule: "nvidia"
>> [ 20.991] (II) Unloading nvidia
>> [ 20.991] (EE) Failed to load module "nvidia" (module does not exist, 0)
>> [ 20.991] (II) LoadModule: "nouveau"
>> [ 20.991] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
>> [ 20.994] (II) Module nouveau: vendor="X.Org Foundation"
>> [ 20.994] compiled for 1.18.3, module version = 1.0.13
>> [ 20.994] Module class: X.Org Video Driver
>> [ 20.994] ABI class: X.Org Video Driver, version 20.0
>> [ 20.994] (II) LoadModule: "modesetting"
>> [ 20.994] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
>> [ 20.995] (II) Module modesetting: vendor="X.Org Foundation"
>> [ 20.995] compiled for 1.18.4, module version = 1.18.4
>> [ 20.995] Module class: X.Org Video Driver
>> [ 20.995] ABI class: X.Org Video Driver, version 20.0
>> [ 20.995] (II) LoadModule: "fbdev"
>> [ 20.995] (WW) Warning, couldn't open module fbdev
>> [ 20.995] (II) UnloadModule: "fbdev"
>> [ 20.995] (II) Unloading fbdev
>> [ 20.995] (EE) Failed to load module "fbdev" (module does not exist, 0)
>> [ 20.995] (II) LoadModule: "vesa"
>> [ 20.995] (WW) Warning, couldn't open module vesa
>> [ 20.995] (II) UnloadModule: "vesa"
>> [ 20.995] (II) Unloading vesa
>> [ 20.995] (EE) Failed to load module "vesa" (module does not exist, 0)
>> [ 20.995] (==) Matched intel as autoconfigured driver 0
>> [ 20.995] (==) Matched nvidia as autoconfigured driver 1
>> [ 20.995] (==) Matched nouveau as autoconfigured driver 2
>> [ 20.995] (==) Matched intel as autoconfigured driver 3
>> [ 20.995] (==) Matched modesetting as autoconfigured driver 4
>> [ 20.995] (==) Matched fbdev as autoconfigured driver 5
>> [ 20.995] (==) Matched vesa as autoconfigured driver 6
>> [ 20.995] (==) Assigned the driver to the xf86ConfigLayout
>> [ 20.995] (II) LoadModule: "intel"
>> [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
>> [ 20.996] (II) Module intel: vendor="X.Org Foundation"
>> [ 20.996] compiled for 1.18.4, module version = 2.99.917
>> [ 20.996] Module class: X.Org Video Driver
>> [ 20.996] ABI class: X.Org Video Driver, version 20.0
>> [ 20.996] (II) UnloadModule: "intel"
>> [ 20.996] (II) Unloading intel
>> [ 20.996] (II) Failed to load module "intel" (already loaded, 22067)
>> [ 20.996] (II) LoadModule: "nvidia"
>> [ 20.996] (WW) Warning, couldn't open module nvidia
>> [ 20.996] (II) UnloadModule: "nvidia"
>> [ 20.996] (II) Unloading nvidia
>> [ 20.996] (EE) Failed to load module "nvidia" (module does not exist, 0)
>> [ 20.996] (II) LoadModule: "nouveau"
>> [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
>> [ 20.996] (II) Module nouveau: vendor="X.Org Foundation"
>> [ 20.996] compiled for 1.18.3, module version = 1.0.13
>> [ 20.996] Module class: X.Org Video Driver
>> [ 20.996] ABI class: X.Org Video Driver, version 20.0
>> [ 20.996] (II) UnloadModule: "nouveau"
>> [ 20.996] (II) Unloading nouveau
>> [ 20.996] (II) Failed to load module "nouveau" (already loaded, 0)
>> [ 20.996] (II) LoadModule: "modesetting"
>> [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
>> [ 20.996] (II) Module modesetting: vendor="X.Org Foundation"
>> [ 20.996] compiled for 1.18.4, module version = 1.18.4
>> [ 20.996] Module class: X.Org Video Driver
>> [ 20.996] ABI class: X.Org Video Driver, version 20.0
>> [ 20.996] (II) UnloadModule: "modesetting"
>> [ 20.996] (II) Unloading modesetting
>> [ 20.996] (II) Failed to load module "modesetting" (already loaded, 0)
>> [ 20.996] (II) LoadModule: "fbdev"
>> [ 20.996] (WW) Warning, couldn't open module fbdev
>> [ 20.996] (II) UnloadModule: "fbdev"
>> [ 20.996] (II) Unloading fbdev
>> [ 20.996] (EE) Failed to load module "fbdev" (module does not exist, 0)
>> [ 20.996] (II) LoadModule: "vesa"
>> [ 20.997] (WW) Warning, couldn't open module vesa
>> [ 20.997] (II) UnloadModule: "vesa"
>> [ 20.997] (II) Unloading vesa
>> [ 20.997] (EE) Failed to load module "vesa" (module does not exist, 0)
>> [ 20.997] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
>> i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
>> 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
>> Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
>> GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
>> [ 20.997] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
>> [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
>> [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
>> [ 20.997] (II) NOUVEAU driver
>> [ 20.997] (II) NOUVEAU driver for NVIDIA chipset families :
>> [ 20.997] RIVA TNT (NV04)
>> [ 20.997] RIVA TNT2 (NV05)
>> [ 20.997] GeForce 256 (NV10)
>> [ 20.997] GeForce 2 (NV11, NV15)
>> [ 20.997] GeForce 4MX (NV17, NV18)
>> [ 20.997] GeForce 3 (NV20)
>> [ 20.997] GeForce 4Ti (NV25, NV28)
>> [ 20.997] GeForce FX (NV3x)
>> [ 20.997] GeForce 6 (NV4x)
>> [ 20.997] GeForce 7 (G7x)
>> [ 20.997] GeForce 8 (G8x)
>> [ 20.997] GeForce GTX 200 (NVA0)
>> [ 20.997] GeForce GTX 400 (NVC0)
>> [ 20.997] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
>> [ 21.020] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
>> [ 21.020] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git1610121931.eb01cc~gd~x (Oibaf <fmrummey at gmail.com>)
>> [ 21.020] (II) intel(0): SNA compiled for use with valgrind
>> [ 21.022] (II) [drm] nouveau interface version: 1.3.1
>> [ 21.022] (EE) Unknown chipset: NV118
>> [ 21.022] (WW) Falling back to old probe method for modesetting
>> [ 21.024] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 5500
>> [ 21.024] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
>> [ 21.024] (II) intel(0): Creating default Display subsection in Screen section
>> "Default Screen Section" for depth/fbbpp 24/32
>> [ 21.024] (==) intel(0): Depth 24, (--) framebuffer bpp 32
>> [ 21.024] (==) intel(0): RGB weight 888
>> [ 21.024] (==) intel(0): Default visual is TrueColor
>> [ 21.024] (II) intel(0): Output eDP1 has no monitor section
>> [ 21.052] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
>> [ 21.052] (II) intel(0): Enabled output eDP1
>> [ 21.052] (II) intel(0): Output DP1 has no monitor section
>> [ 21.052] (II) intel(0): Enabled output DP1
>> [ 21.052] (II) intel(0): Output HDMI1 has no monitor section
>> [ 21.052] (II) intel(0): Enabled output HDMI1
>> [ 21.052] (II) intel(0): Output DP2 has no monitor section
>> [ 21.052] (II) intel(0): Enabled output DP2
>> [ 21.052] (II) intel(0): Output HDMI2 has no monitor section
>> [ 21.052] (II) intel(0): Enabled output HDMI2
>> [ 21.052] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
>> [ 21.052] (II) intel(0): Output VIRTUAL1 has no monitor section
>> [ 21.052] (II) intel(0): Enabled output VIRTUAL1
>> [ 21.052] (--) intel(0): Output eDP1 using initial mode 2880x1620 on pipe 0
>> [ 21.052] (--) intel(0): Output DP1 using initial mode 2560x1440 on pipe 1
>> [ 21.052] (==) intel(0): TearFree enabled
>> [ 21.052] (==) intel(0): DPI set to (96, 96)
>> [ 21.052] (II) Loading sub module "dri2"
>> [ 21.052] (II) LoadModule: "dri2"
>> [ 21.053] (II) Module "dri2" already built-in
>> [ 21.053] (II) Loading sub module "present"
>> [ 21.053] (II) LoadModule: "present"
>> [ 21.053] (II) Module "present" already built-in
>> [ 21.053] (==) Depth 24 pixmap format is 32 bpp
>> [ 21.058] (II) intel(0): SNA initialized with Broadwell (gen8) backend
>> [ 21.058] (==) intel(0): Backing store enabled
>> [ 21.058] (==) intel(0): Silken mouse enabled
>> [ 21.060] (II) intel(0): HW Cursor enabled
>> [ 21.060] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>> [ 21.061] (==) intel(0): DPMS enabled
>> [ 21.061] (==) intel(0): Display hotplug detection enabled
>> [ 21.061] (II) intel(0): [DRI2] Setup complete
>> [ 21.061] (II) intel(0): [DRI2] DRI driver: i965
>> [ 21.061] (II) intel(0): [DRI2] VDPAU driver: va_gl
>> [ 21.061] (II) intel(0): direct rendering: DRI2 enabled
>> [ 21.061] (II) intel(0): hardware support for Present enabled
>> [ 21.061] (--) RandR disabled
>> [ 21.067] (II) SELinux: Disabled on system
>> [ 21.115] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
>> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context
>> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_profile
>> [ 21.115] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
>> [ 21.115] (II) AIGLX: enabled GLX_INTEL_swap_event
>> [ 21.115] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
>> [ 21.115] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
>> [ 21.115] (II) AIGLX: enabled GLX_ARB_fbconfig_float
>> [ 21.115] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
>> [ 21.115] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
>> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_robustness
>> [ 21.116] (II) AIGLX: Loaded and initialized i965
>> [ 21.116] (II) GLX: Initialized DRI2 GL provider for screen 0
>> [ 21.125] (II) intel(0): switch to mode 2880x1620 at 60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
>> [ 21.126] (II) intel(0): switch to mode 2560x1440 at 60.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
>> [ 21.127] (II) intel(0): Setting screen physical size to 762 x 428
>> [ 21.271] (II) config/udev: Adding input device Power Button (/dev/input/event3)
>> [ 21.276] (**) Power Button: Applying InputClass "evdev keyboard catchall"
>> [ 21.276] (II) LoadModule: "evdev"
>> [ 21.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
>> [ 21.279] (II) Module evdev: vendor="X.Org Foundation"
>> [ 21.280] compiled for 1.18.1, module version = 2.10.1
>> [ 21.280] Module class: X.Org XInput Driver
>> [ 21.280] ABI class: X.Org XInput driver, version 22.1
>> [ 21.280] (II) Using input driver 'evdev' for 'Power Button'
>> [ 21.280] (**) Power Button: always reports core events
>> [ 21.280] (**) evdev: Power Button: Device: "/dev/input/event3"
>> [ 21.280] (--) evdev: Power Button: Vendor 0 Product 0x1
>> [ 21.280] (--) evdev: Power Button: Found keys
>> [ 21.280] (II) evdev: Power Button: Configuring as keyboard
>> [ 21.280] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
>> [ 21.280] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
>> [ 21.280] (**) Option "xkb_rules" "evdev"
>> [ 21.280] (**) Option "xkb_model" "pc105"
>> [ 21.280] (**) Option "xkb_layout" "dk"
>> [ 21.359] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
>> [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
>> [ 21.359] (II) Using input driver 'evdev' for 'Video Bus'
>> [ 21.359] (**) Video Bus: always reports core events
>> [ 21.359] (**) evdev: Video Bus: Device: "/dev/input/event15"
>> [ 21.359] (--) evdev: Video Bus: Vendor 0 Product 0x6
>> [ 21.359] (--) evdev: Video Bus: Found keys
>> [ 21.359] (II) evdev: Video Bus: Configuring as keyboard
>> [ 21.359] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event15"
>> [ 21.359] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
>> [ 21.359] (**) Option "xkb_rules" "evdev"
>> [ 21.359] (**) Option "xkb_model" "pc105"
>> [ 21.359] (**) Option "xkb_layout" "dk"
>> [ 21.359] (II) config/udev: Adding input device Video Bus (/dev/input/event16)
>> [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
>> [ 21.361] (II) Using input driver 'evdev' for 'Video Bus'
>> [ 21.361] (**) Video Bus: always reports core events
>> [ 21.361] (**) evdev: Video Bus: Device: "/dev/input/event16"
>> [ 21.361] (--) evdev: Video Bus: Vendor 0 Product 0x6
>> [ 21.361] (--) evdev: Video Bus: Found keys
>> [ 21.361] (II) evdev: Video Bus: Configuring as keyboard
>> [ 21.361] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input17/event16"
>> [ 21.361] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
>> [ 21.361] (**) Option "xkb_rules" "evdev"
>> [ 21.361] (**) Option "xkb_model" "pc105"
>> [ 21.361] (**) Option "xkb_layout" "dk"
>> [ 21.362] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
>> [ 21.362] (II) No input driver specified, ignoring this device.
>> [ 21.362] (II) This device may have been added with another device file.
>> [ 21.362] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
>> [ 21.362] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
>> [ 21.362] (II) Using input driver 'evdev' for 'Sleep Button'
>> [ 21.362] (**) Sleep Button: always reports core events
>> [ 21.362] (**) evdev: Sleep Button: Device: "/dev/input/event2"
>> [ 21.362] (--) evdev: Sleep Button: Vendor 0 Product 0x3
>> [ 21.364] (--) evdev: Sleep Button: Found keys
>> [ 21.364] (II) evdev: Sleep Button: Configuring as keyboard
>> [ 21.364] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
>> [ 21.364] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
>> [ 21.364] (**) Option "xkb_rules" "evdev"
>> [ 21.364] (**) Option "xkb_model" "pc105"
>> [ 21.364] (**) Option "xkb_layout" "dk"
>> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event18)
>> [ 21.365] (II) No input driver specified, ignoring this device.
>> [ 21.365] (II) This device may have been added with another device file.
>> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event19)
>> [ 21.365] (II) No input driver specified, ignoring this device.
>> [ 21.365] (II) This device may have been added with another device file.
>> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event20)
>> [ 21.365] (II) No input driver specified, ignoring this device.
>> [ 21.365] (II) This device may have been added with another device file.
>> [ 21.366] (II) config/udev: Adding input device Logitech M705 (/dev/input/event4)
>> [ 21.366] (**) Logitech M705: Applying InputClass "evdev pointer catchall"
>> [ 21.366] (II) Using input driver 'evdev' for 'Logitech M705'
>> [ 21.366] (**) Logitech M705: always reports core events
>> [ 21.366] (**) evdev: Logitech M705: Device: "/dev/input/event4"
>> [ 21.366] (--) evdev: Logitech M705: Vendor 0x46d Product 0x101b
>> [ 21.366] (--) evdev: Logitech M705: Found 20 mouse buttons
>> [ 21.366] (--) evdev: Logitech M705: Found scroll wheel(s)
>> [ 21.366] (--) evdev: Logitech M705: Found relative axes
>> [ 21.366] (--) evdev: Logitech M705: Found x and y relative axes
>> [ 21.366] (II) evdev: Logitech M705: Configuring as mouse
>> [ 21.366] (II) evdev: Logitech M705: Adding scrollwheel support
>> [ 21.366] (**) evdev: Logitech M705: YAxisMapping: buttons 4 and 5
>> [ 21.366] (**) evdev: Logitech M705: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>> [ 21.366] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input6/event4"
>> [ 21.366] (II) XINPUT: Adding extended input device "Logitech M705" (type: MOUSE, id 10)
>> [ 21.366] (II) evdev: Logitech M705: initialized for relative axes.
>> [ 21.366] (**) Logitech M705: (accel) keeping acceleration scheme 1
>> [ 21.366] (**) Logitech M705: (accel) acceleration profile 0
>> [ 21.366] (**) Logitech M705: (accel) acceleration factor: 2.000
>> [ 21.366] (**) Logitech M705: (accel) acceleration threshold: 4
>> [ 21.367] (II) config/udev: Adding input device Logitech M705 (/dev/input/mouse0)
>> [ 21.367] (II) No input driver specified, ignoring this device.
>> [ 21.367] (II) This device may have been added with another device file.
>> [ 21.367] (II) config/udev: Adding input device Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) (/dev/input/event6)
>> [ 21.367] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard catchall"
>> [ 21.367] (II) Using input driver 'evdev' for 'Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )'
>> [ 21.367] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): always reports core events
>> [ 21.367] (**) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Device: "/dev/input/event6"
>> [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b
>> [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Found keys
>> [ 21.367] (II) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Configuring as keyboard
>> [ 21.367] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.0/0003:04B3:301B.0005/input/input8/event6"
>> [ 21.367] (II) XINPUT: Adding extended input device "Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )" (type: KEYBOARD, id 11)
>> [ 21.367] (**) Option "xkb_rules" "evdev"
>> [ 21.367] (**) Option "xkb_model" "pc105"
>> [ 21.367] (**) Option "xkb_layout" "dk"
>> [ 21.368] (II) config/udev: Adding input device Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) (/dev/input/event7)
>> [ 21.368] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard catchall"
>> [ 21.368] (II) Using input driver 'evdev' for 'Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )'
>> [ 21.368] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): always reports core events
>> [ 21.368] (**) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Device: "/dev/input/event7"
>> [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b
>> [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Found keys
>> [ 21.368] (II) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Configuring as keyboard
>> [ 21.368] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.1/0003:04B3:301B.0006/input/input9/event7"
>> [ 21.368] (II) XINPUT: Adding extended input device "Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )" (type: KEYBOARD, id 12)
>> [ 21.368] (**) Option "xkb_rules" "evdev"
>> [ 21.368] (**) Option "xkb_model" "pc105"
>> [ 21.368] (**) Option "xkb_layout" "dk"
>> [ 21.369] (II) config/udev: Adding input device Integrated Camera (/dev/input/event17)
>> [ 21.369] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
>> [ 21.369] (II) Using input driver 'evdev' for 'Integrated Camera'
>> [ 21.369] (**) Integrated Camera: always reports core events
>> [ 21.369] (**) evdev: Integrated Camera: Device: "/dev/input/event17"
>> [ 21.369] (--) evdev: Integrated Camera: Vendor 0x5986 Product 0x366
>> [ 21.369] (--) evdev: Integrated Camera: Found keys
>> [ 21.369] (II) evdev: Integrated Camera: Configuring as keyboard
>> [ 21.369] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input18/event17"
>> [ 21.369] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 13)
>> [ 21.369] (**) Option "xkb_rules" "evdev"
>> [ 21.369] (**) Option "xkb_model" "pc105"
>> [ 21.369] (**) Option "xkb_layout" "dk"
>> [ 21.370] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
>> [ 21.370] (II) No input driver specified, ignoring this device.
>> [ 21.370] (II) This device may have been added with another device file.
>> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event11)
>> [ 21.370] (II) No input driver specified, ignoring this device.
>> [ 21.370] (II) This device may have been added with another device file.
>> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
>> [ 21.370] (II) No input driver specified, ignoring this device.
>> [ 21.370] (II) This device may have been added with another device file.
>> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event13)
>> [ 21.370] (II) No input driver specified, ignoring this device.
>> [ 21.370] (II) This device may have been added with another device file.
>> [ 21.375] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
>> [ 21.375] (II) No input driver specified, ignoring this device.
>> [ 21.375] (II) This device may have been added with another device file.
>> [ 21.375] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
>> [ 21.375] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
>> [ 21.375] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
>> [ 21.375] (**) AT Translated Set 2 keyboard: always reports core events
>> [ 21.375] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
>> [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
>> [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Found keys
>> [ 21.375] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
>> [ 21.375] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
>> [ 21.375] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
>> [ 21.375] (**) Option "xkb_rules" "evdev"
>> [ 21.375] (**) Option "xkb_model" "pc105"
>> [ 21.375] (**) Option "xkb_layout" "dk"
>> [ 21.376] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
>> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
>> [ 21.376] (II) LoadModule: "synaptics"
>> [ 21.376] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
>> [ 21.381] (II) Module synaptics: vendor="X.Org Foundation"
>> [ 21.381] compiled for 1.18.1, module version = 1.8.2
>> [ 21.381] Module class: X.Org XInput Driver
>> [ 21.381] ABI class: X.Org XInput driver, version 22.1
>> [ 21.381] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
>> [ 21.381] (**) SynPS/2 Synaptics TouchPad: always reports core events
>> [ 21.381] (**) Option "Device" "/dev/input/event5"
>> [ 21.464] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1266 - 5676 (res 45)
>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1096 - 4758 (res 68)
>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
>> [ 21.464] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
>> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
>> [ 21.464] (**) SynPS/2 Synaptics TouchPad: always reports core events
>> [ 21.500] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
>> [ 21.500] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
>> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
>> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
>> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
>> [ 21.500] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
>> [ 21.500] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
>> [ 21.500] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
>> [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event8)
>> [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
>> [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "trackpoint catchall"
>> [ 21.501] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
>> [ 21.501] (**) TPPS/2 IBM TrackPoint: always reports core events
>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
>> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
>> [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
>> [ 21.501] (**) Option "Emulate3Buttons" "true"
>> [ 21.501] (**) Option "EmulateWheel" "true"
>> [ 21.501] (**) Option "EmulateWheelButton" "2"
>> [ 21.501] (**) Option "YAxisMapping" "4 5"
>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
>> [ 21.501] (**) Option "XAxisMapping" "6 7"
>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
>> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>> [ 21.501] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input7/event8"
>> [ 21.501] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 16)
>> [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
>> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
>> [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
>> [ 21.501] (II) No input driver specified, ignoring this device.
>> [ 21.501] (II) This device may have been added with another device file.
>> [ 21.502] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9)
>> [ 21.502] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
>> [ 21.502] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
>> [ 21.502] (**) ThinkPad Extra Buttons: always reports core events
>> [ 21.502] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9"
>> [ 21.502] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
>> [ 21.502] (--) evdev: ThinkPad Extra Buttons: Found keys
>> [ 21.502] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
>> [ 21.502] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input10/event9"
>> [ 21.502] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17)
>> [ 21.502] (**) Option "xkb_rules" "evdev"
>> [ 21.502] (**) Option "xkb_model" "pc105"
>> [ 21.502] (**) Option "xkb_layout" "dk"
>> [ 23.053] (II) intel(0): EDID vendor "MEI", prod id 38562
>> [ 23.053] (II) intel(0): EDID quirk: Use maximum size instead of detailed timing sizes.
>> [ 23.053] (II) intel(0): Using EDID range info for horizontal sync
>> [ 23.053] (II) intel(0): Using EDID range info for vertical refresh
>> [ 23.053] (II) intel(0): Printing DDC gathered Modelines:
>> [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
>> [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
>> [ 23.909] (II) intel(0): resizing framebuffer to 5440x1620
>> [ 23.960] (II) intel(0): switch to mode 2560x1440 at 60.0 on DP1 using pipe 1, position (2880, 0), rotation normal, reflection none
>
>
>
>
>
>> _______________________________________________
>> Nouveau mailing list
>> Nouveau at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/nouveau
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <https://lists.freedesktop.org/archives/nouveau/attachments/20161207/898a0b0c/attachment-0001.sig>
More information about the Nouveau
mailing list