[Nouveau] [PATCH v3] drm/nouveau/fb/nv50: set DMA mask before mapping scratch page

[Ard Biesheuvel]

On 15 July 2016 at 07:52, Alexandre Courbot <gnurou at gmail.com> wrote:
> On Fri, Jul 8, 2016 at 1:59 AM, Ard Biesheuvel
> <ard.biesheuvel at linaro.org> wrote:
>> The 100c08 scratch page is mapped using dma_map_page() before the TTM
>> layer has had a chance to set the DMA mask. This means we are still
>> running with the default of 32 when this code executes, and this causes
>> problems for platforms with no memory below 4 GB (such as AMD Seattle)
>>
>> So move the dma_map_page() to the .init hook, and set the streaming DMA
>> mask based on the MMU subdev parameters before performing the call.
>>
>> Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
>> ---
>> I am sure there is a much better way to address this, but this fixes the
>> problem I get on AMD Seattle with a GeForce 210 PCIe card:
>>
>>    nouveau 0000:02:00.0: enabling device (0000 -> 0003)
>>    nouveau 0000:02:00.0: NVIDIA GT218 (0a8280b1)
>>    nouveau 0000:02:00.0: bios: version 70.18.a6.00.00
>>    nouveau 0000:02:00.0: fb ctor failed, -14
>>    nouveau: probe of 0000:02:00.0 failed with error -14
>>
>> v2: replace incorrect comparison of dma_addr_t type var against NULL
>> v3: rework code to get rid of DMA_ERROR_CODE references, which is not
>>     defined on all architectures
>>
>>  drivers/gpu/drm/nouveau/nvkm/subdev/fb/nv50.c | 40 ++++++++++++++------
>>  1 file changed, 29 insertions(+), 11 deletions(-)
>
> I think the same problem exists in fb/gf100.c, would be nice to fix it
> there as well.
>
> I have faced similar issues on Tegra before. I wonder whether this
> could not be addressed the same way I did, i.e. by setting a
> temporary, fail-safe DMA mask in nvkm_device_pci_new()? That would
> allow all subdevs to map pages to the device safely in their init.
> With your solution, each subdev in that scenario needs to set a DMA
> mask to be safe.
>
> Not sure whether that's practical as I suppose you want to make the
> DMA mask larger than 32 bits?
>

Yes. This particular device supports 40 bits (judging from the MMU
driver code) of physical address space, and RAM starts at
0x80_0000_0000 on AMD Seattle, so we need all 40 bits.

> If you absolutely need to do this in the device, can we move the DMA
> mask setting logic in nouveau_ttm into its own function and call it
> from the FB driver to make sure the mask is correctly set? Maybe this
> could even be made a MMU function and called during MMU ctor or init
> (in the latter case we would also need to reorder MMU init to make it
> happen before FB and INSTMEM).

Happy to have stab at implementing this, but I'd like some buy in from
the maintainer first before I dive into this. Ben is the person to
give his blessing, I suppose? He has not responded to any of my
postings so far, unfortunately.

Thanks,
Ard.