[Nouveau] [PATCH v2 01/15] drm/nouveau: Don't leak runtime pm ref on driver unload

[Lukas Wunner]

nouveau_drm_load() calls pm_runtime_put() if nouveau_runtime_pm != 0,
but nouveau_drm_unload() calls pm_runtime_get_sync() unconditionally.
We therefore leak a runtime pm ref whenever nouveau is loaded with
runpm=0 and then unloaded. The GPU will subsequently never runtime
suspend even if nouveau is loaded again with runpm=1.

Fix by taking the runtime pm ref under the same condition that it was
released on driver load.

Fixes: 5addcf0a5f0f ("nouveau: add runtime PM support (v0.9)")
Cc: Dave Airlie <airlied at redhat.com>
Cc: Ben Skeggs <bskeggs at redhat.com>
Reported-by: Karol Herbst <karolherbst at gmail.com>
Tested-by: Karol Herbst <karolherbst at gmail.com>
Tested-by: Peter Wu <peter at lekensteyn.nl>
Signed-off-by: Lukas Wunner <lukas at wunner.de>
---
 drivers/gpu/drm/nouveau/nouveau_drm.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index 5c4d4df..2b0f441 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -490,7 +490,10 @@ nouveau_drm_unload(struct drm_device *dev)
 {
 	struct nouveau_drm *drm = nouveau_drm(dev);
 
-	pm_runtime_get_sync(dev->dev);
+	if (nouveau_runtime_pm != 0) {
+		pm_runtime_get_sync(dev->dev);
+	}
+
 	nouveau_fbcon_fini(dev);
 	nouveau_accel_fini(drm);
 	nouveau_hwmon_fini(dev);
-- 
2.8.1