[Nouveau] [PATCH] ltc/gf100: use more reasonable timeout value

[Alexandre Courbot]

LTC operations timeout was set to 2ms, which may be too low for devices
that run at very low clocks (e.g. GM20B) and trigger timeout messages.

Set the timeout to the default 2s. Also remove the redundant error
messages since nvkm_wait_msec() will already display a warning.

Signed-off-by: Alexandre Courbot <acourbot at nvidia.com>
---
 drm/nouveau/nvkm/subdev/ltc/gf100.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drm/nouveau/nvkm/subdev/ltc/gf100.c b/drm/nouveau/nvkm/subdev/ltc/gf100.c
index fb0de83da13c..c9eb677967a8 100644
--- a/drm/nouveau/nvkm/subdev/ltc/gf100.c
+++ b/drm/nouveau/nvkm/subdev/ltc/gf100.c
@@ -129,9 +129,7 @@ gf100_ltc_invalidate(struct nvkm_ltc *ltc)
 	s64 taken;
 
 	nvkm_wr32(device, 0x70004, 0x00000001);
-	taken = nvkm_wait_msec(device, 2, 0x70004, 0x00000003, 0x00000000);
-	if (taken < 0)
-		nvkm_warn(&ltc->subdev, "LTC invalidate timeout\n");
+	taken = nvkm_wait_msec(device, 2000, 0x70004, 0x00000003, 0x00000000);
 
 	if (taken > 0)
 		nvkm_debug(&ltc->subdev, "LTC invalidate took %lld ns\n", taken);
@@ -144,9 +142,7 @@ gf100_ltc_flush(struct nvkm_ltc *ltc)
 	s64 taken;
 
 	nvkm_wr32(device, 0x70010, 0x00000001);
-	taken = nvkm_wait_msec(device, 2, 0x70010, 0x00000003, 0x00000000);
-	if (taken < 0)
-		nvkm_warn(&ltc->subdev, "LTC flush timeout\n");
+	taken = nvkm_wait_msec(device, 2000, 0x70010, 0x00000003, 0x00000000);
 
 	if (taken > 0)
 		nvkm_debug(&ltc->subdev, "LTC flush took %lld ns\n", taken);
-- 
2.7.2