[Nouveau] GM108GLM?
Pierre Moreau
pierre.morrow at free.fr
Thu Oct 27 09:06:52 UTC 2016
Hello,
The idea was to use the modesetting DDX instead of Nouveau’s one for Maxwell+
as EXA was [broken][1]. But you can give a try at Ilia’s [patches][2], which
fix the Nouveau DDX for GM10x and GM20x (I don’t think it has been tested on a
GM108 yet).
Best regards,
Pierre Moreau
[1]: https://cgit.freedesktop.org/nouveau/xf86-video-nouveau/commit/?id=3e2e0faa2ee1cce9c1bb5c7ad80d0592460f3edc
[2]: https://github.com/imirkin/xf86-video-nouveau/
On 11:29 am - Oct 18 2016, Sune Mølgaard wrote:
> Hi,
>
> It would seem like it (attachments are from 4.9-rc1, btw), but it
> doesn't look like there is any support in the Xorg driver.
>
> How can I help with that?
>
> Best regards,
>
> Sune Mølgaard
> Translucent ApS
>
> On 2016-04-22 09:33, Pierre Moreau wrote:
> > Hello,
> >
> > A patch was merged yesterday to recognise GM108 (see
> > https://github.com/skeggsb/nouveau/commit/3da1f2a19e5e8dc8d68a4400d9cca01c64ecd59e).
> > I guess it will make it into 4.7.
> >
> > Pierre
>
> lspci -vvvv
> 00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
> Subsystem: Lenovo Broadwell-U Host Bridge -OPI
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: <access denied>
> Kernel driver in use: bdw_uncore
>
> 00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09) (prog-if 00 [VGA controller])
> Subsystem: Lenovo Broadwell-U Integrated Graphics
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 49
> Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=16M]
> Region 2: Memory at c0000000 (64-bit, prefetchable) [size=512M]
> Region 4: I/O ports at 4000 [size=64]
> [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
> Capabilities: <access denied>
> Kernel driver in use: i915
> Kernel modules: i915
>
> 00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
> Subsystem: Lenovo Broadwell-U Audio Controller
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 50
> Region 0: Memory at f4230000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: snd_hda_intel
> Kernel modules: snd_hda_intel
>
> 00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03) (prog-if 30 [XHCI])
> Subsystem: Lenovo Wildcat Point-LP USB xHCI Controller
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 42
> Region 0: Memory at f4220000 (64-bit, non-prefetchable) [size=64K]
> Capabilities: <access denied>
> Kernel driver in use: xhci_hcd
>
> 00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
> Subsystem: Lenovo Wildcat Point-LP MEI Controller
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 46
> Region 0: Memory at f4239000 (64-bit, non-prefetchable) [size=32]
> Capabilities: <access denied>
> Kernel driver in use: mei_me
> Kernel modules: mei_me
>
> 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection (3) I218-V (rev 03)
> Subsystem: Lenovo Ethernet Connection (3) I218-V
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 43
> Region 0: Memory at f4200000 (32-bit, non-prefetchable) [size=128K]
> Region 1: Memory at f423e000 (32-bit, non-prefetchable) [size=4K]
> Region 2: I/O ports at 4080 [size=32]
> Capabilities: <access denied>
> Kernel driver in use: e1000e
> Kernel modules: e1000e
>
> 00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
> Subsystem: Lenovo Wildcat Point-LP High Definition Audio Controller
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 47
> Region 0: Memory at f4234000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
> Kernel driver in use: snd_hda_intel
> Kernel modules: snd_hda_intel
>
> 00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #6 (rev e3) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 17
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: f4100000-f41fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin C routed to IRQ 18
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: f4000000-f40fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
> I/O behind bridge: 00003000-00003fff
> Memory behind bridge: f3000000-f3ffffff
> Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: <access denied>
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI Controller (rev 03) (prog-if 20 [EHCI])
> Subsystem: Lenovo Wildcat Point-LP USB EHCI Controller
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 23
> Region 0: Memory at f423d000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: <access denied>
> Kernel driver in use: ehci-pci
>
> 00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
> Subsystem: Lenovo Wildcat Point-LP LPC Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: <access denied>
> Kernel driver in use: lpc_ich
> Kernel modules: lpc_ich
>
> 00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03) (prog-if 01 [AHCI 1.0])
> Subsystem: Lenovo Wildcat Point-LP SATA Controller [AHCI Mode]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 19
> Region 0: I/O ports at 40a8 [size=8]
> Region 1: I/O ports at 40b4 [size=4]
> Region 2: I/O ports at 40a0 [size=8]
> Region 3: I/O ports at 40b0 [size=4]
> Region 4: I/O ports at 4060 [size=32]
> Region 5: Memory at f423c000 (32-bit, non-prefetchable) [size=2K]
> Capabilities: <access denied>
> Kernel driver in use: ahci
> Kernel modules: ahci
>
> 00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
> Subsystem: Lenovo Wildcat Point-LP SMBus Controller
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin C routed to IRQ 10
> Region 0: Memory at f4238000 (64-bit, non-prefetchable) [size=256]
> Region 4: I/O ports at efa0 [size=32]
> Kernel modules: i2c_i801
>
> 00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP Thermal Management Controller (rev 03)
> Subsystem: Lenovo Wildcat Point-LP Thermal Management Controller
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin C routed to IRQ 18
> Region 0: Memory at f423b000 (64-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
> Kernel driver in use: intel_pch_thermal
> Kernel modules: intel_pch_thermal
>
> 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
> Subsystem: Lenovo RTS5227 PCI Express Card Reader
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 44
> Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
> Kernel driver in use: rtsx_pci
> Kernel modules: rtsx_pci
>
> 03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 99)
> Subsystem: Intel Corporation Dual Band Wireless-AC 7265
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 48
> Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=8K]
> Capabilities: <access denied>
> Kernel driver in use: iwlwifi
> Kernel modules: iwlwifi
>
> 08:00.0 3D controller: NVIDIA Corporation GM108GLM [Quadro K620M] (rev a2)
> Subsystem: Lenovo GM108GLM [Quadro K620M]
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 45
> Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
> Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
> Region 5: I/O ports at 3000 [size=128]
> Expansion ROM at <ignored> [disabled]
> Capabilities: <access denied>
> Kernel driver in use: nouveau
> Kernel modules: nvidiafb, nouveau
>
> dmesg |egrep -i "nouveau|nvidia"
> [ 1.893467] nouveau: detected PR support, will not use DSM
> [ 1.893677] nouveau 0000:08:00.0: NVIDIA GM108 (1183a0a2)
> [ 1.907342] nouveau 0000:08:00.0: bios: version 82.08.1f.00.03
> [ 1.991211] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f (1d408200)
> [ 1.991212] nouveau 0000:08:00.0: fb: 2048 MiB DDR3
> [ 3.269352] nouveau 0000:08:00.0: DRM: VRAM: 2048 MiB
> [ 3.269408] nouveau 0000:08:00.0: DRM: GART: 1048576 MiB
> [ 3.269465] nouveau 0000:08:00.0: DRM: Pointer to TMDS table invalid
> [ 3.269523] nouveau 0000:08:00.0: DRM: DCB version 4.0
> [ 3.269579] nouveau 0000:08:00.0: DRM: Pointer to flat panel table invalid
> [ 3.451054] nouveau 0000:08:00.0: DRM: MM: using COPY for buffer copies
> [ 3.451117] [drm] Initialized nouveau 1.3.1 20120801 for 0000:08:00.0 on minor 0
> [ 8.925115] nouveau 0000:08:00.0: DRM: evicting buffers...
> [ 8.925189] nouveau 0000:08:00.0: DRM: waiting for kernel channels to go idle...
> [ 8.925283] nouveau 0000:08:00.0: DRM: suspending client object trees...
> [ 8.929091] nouveau 0000:08:00.0: DRM: suspending kernel object tree...
> [ 17.449259] hid_logitech_hidpp hid_logitech_dj usbhid hid crct10dif_pclmul rtsx_pci_sdmmc crc32_pclmul crc32c_intel mmc_core nouveau ghash_clmulni_intel aesni_intel mxm_wmi i2c_algo_bit aes_x86_64 ttm lrw gf128mul glue_helper drm_kms_helper ablk_helper cryptd syscopyarea sysfillrect psmouse sysimgblt fb_sys_fops drm ahci libahci rtsx_pci e1000e ptp pps_core thermal wmi fjes video button
> [ 18.641499] nouveau 0000:08:00.0: DRM: resuming kernel object tree...
> [ 18.724503] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f (1f408200)
> [ 18.761491] nouveau 0000:08:00.0: priv: HUB0: 10ecc0 ffffffff (1d40822c)
> [ 18.761992] nouveau 0000:08:00.0: DRM: resuming client object trees...
> [ 26.025637] nouveau 0000:08:00.0: DRM: evicting buffers...
> [ 26.025639] nouveau 0000:08:00.0: DRM: waiting for kernel channels to go idle...
> [ 26.025662] nouveau 0000:08:00.0: DRM: suspending client object trees...
> [ 26.029451] nouveau 0000:08:00.0: DRM: suspending kernel object tree...
> [ 20.874]
> X.Org X Server 1.18.4
> Release Date: 2016-07-19
> [ 20.874] X Protocol Version 11, Revision 0
> [ 20.874] Build Operating System: Linux 3.13.0-95-generic x86_64 Ubuntu
> [ 20.874] Current Operating System: Linux dell-smo 4.9.0-040900rc1-generic #201610151630 SMP Sat Oct 15 20:33:39 UTC 2016 x86_64
> [ 20.874] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-040900rc1-generic root=UUID=a9421b5e-ff3f-4ebd-8f9f-13d24c76ba34 ro cryptopts=target=sda6_crypt,source=/dev/disk/by-uuid/64096e82-f7f4-4917-80df-e123aa15a022,discard vt.handoff=7
> [ 20.874] Build Date: 14 September 2016 03:33:24PM
> [ 20.874] xorg-server 2:1.18.4-0ubuntu0.1 (For technical support please see http://www.ubuntu.com/support)
> [ 20.874] Current version of pixman: 0.33.6
> [ 20.874] Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> [ 20.874] Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [ 20.874] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 18 09:21:13 2016
> [ 20.877] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
> [ 20.881] (==) No Layout section. Using the first Screen section.
> [ 20.881] (==) No screen section available. Using defaults.
> [ 20.881] (**) |-->Screen "Default Screen Section" (0)
> [ 20.881] (**) | |-->Monitor "<default monitor>"
> [ 20.882] (==) No monitor specified for screen "Default Screen Section".
> Using a default monitor configuration.
> [ 20.882] (==) Automatically adding devices
> [ 20.882] (==) Automatically enabling devices
> [ 20.882] (==) Automatically adding GPU devices
> [ 20.882] (==) Max clients allowed: 256, resource mask: 0x1fffff
> [ 20.889] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
> [ 20.889] Entry deleted from font path.
> [ 20.892] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
> [ 20.892] Entry deleted from font path.
> [ 20.893] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
> [ 20.893] Entry deleted from font path.
> [ 20.893] (==) FontPath set to:
> /usr/share/fonts/X11/misc,
> /usr/share/fonts/X11/100dpi/:unscaled,
> /usr/share/fonts/X11/Type1,
> /usr/share/fonts/X11/100dpi,
> built-ins
> [ 20.893] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
> [ 20.893] (II) The server relies on udev to provide the list of input devices.
> If no devices become available, reconfigure udev or disable AutoAddDevices.
> [ 20.894] (II) Loader magic: 0x563366d65dc0
> [ 20.894] (II) Module ABI versions:
> [ 20.894] X.Org ANSI C Emulation: 0.4
> [ 20.894] X.Org Video Driver: 20.0
> [ 20.894] X.Org XInput driver : 22.1
> [ 20.894] X.Org Server Extension : 9.0
> [ 20.895] (++) using VT number 7
>
> [ 20.895] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
> [ 20.895] (II) xfree86: Adding drm device (/dev/dri/card1)
> [ 20.910] (II) xfree86: Adding drm device (/dev/dri/card0)
> [ 20.912] (--) PCI:*(0:0:2:0) 8086:1616:17aa:2225 rev 9, Mem @ 0xf2000000/16777216, 0xc0000000/536870912, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
> [ 20.912] (--) PCI: (0:8:0:0) 10de:137a:17aa:2225 rev 162, Mem @ 0xf3000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x00003000/128
> [ 20.912] (II) LoadModule: "glx"
> [ 20.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
> [ 20.980] (II) Module glx: vendor="X.Org Foundation"
> [ 20.980] compiled for 1.18.4, module version = 1.0.0
> [ 20.980] ABI class: X.Org Server Extension, version 9.0
> [ 20.980] (==) AIGLX enabled
> [ 20.980] (==) Matched intel as autoconfigured driver 0
> [ 20.980] (==) Matched nvidia as autoconfigured driver 1
> [ 20.980] (==) Matched nouveau as autoconfigured driver 2
> [ 20.980] (==) Matched intel as autoconfigured driver 3
> [ 20.980] (==) Matched modesetting as autoconfigured driver 4
> [ 20.980] (==) Matched fbdev as autoconfigured driver 5
> [ 20.980] (==) Matched vesa as autoconfigured driver 6
> [ 20.980] (==) Assigned the driver to the xf86ConfigLayout
> [ 20.980] (II) LoadModule: "intel"
> [ 20.983] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
> [ 20.988] (II) Module intel: vendor="X.Org Foundation"
> [ 20.988] compiled for 1.18.4, module version = 2.99.917
> [ 20.988] Module class: X.Org Video Driver
> [ 20.988] ABI class: X.Org Video Driver, version 20.0
> [ 20.988] (II) LoadModule: "nvidia"
> [ 20.991] (WW) Warning, couldn't open module nvidia
> [ 20.991] (II) UnloadModule: "nvidia"
> [ 20.991] (II) Unloading nvidia
> [ 20.991] (EE) Failed to load module "nvidia" (module does not exist, 0)
> [ 20.991] (II) LoadModule: "nouveau"
> [ 20.991] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
> [ 20.994] (II) Module nouveau: vendor="X.Org Foundation"
> [ 20.994] compiled for 1.18.3, module version = 1.0.13
> [ 20.994] Module class: X.Org Video Driver
> [ 20.994] ABI class: X.Org Video Driver, version 20.0
> [ 20.994] (II) LoadModule: "modesetting"
> [ 20.994] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
> [ 20.995] (II) Module modesetting: vendor="X.Org Foundation"
> [ 20.995] compiled for 1.18.4, module version = 1.18.4
> [ 20.995] Module class: X.Org Video Driver
> [ 20.995] ABI class: X.Org Video Driver, version 20.0
> [ 20.995] (II) LoadModule: "fbdev"
> [ 20.995] (WW) Warning, couldn't open module fbdev
> [ 20.995] (II) UnloadModule: "fbdev"
> [ 20.995] (II) Unloading fbdev
> [ 20.995] (EE) Failed to load module "fbdev" (module does not exist, 0)
> [ 20.995] (II) LoadModule: "vesa"
> [ 20.995] (WW) Warning, couldn't open module vesa
> [ 20.995] (II) UnloadModule: "vesa"
> [ 20.995] (II) Unloading vesa
> [ 20.995] (EE) Failed to load module "vesa" (module does not exist, 0)
> [ 20.995] (==) Matched intel as autoconfigured driver 0
> [ 20.995] (==) Matched nvidia as autoconfigured driver 1
> [ 20.995] (==) Matched nouveau as autoconfigured driver 2
> [ 20.995] (==) Matched intel as autoconfigured driver 3
> [ 20.995] (==) Matched modesetting as autoconfigured driver 4
> [ 20.995] (==) Matched fbdev as autoconfigured driver 5
> [ 20.995] (==) Matched vesa as autoconfigured driver 6
> [ 20.995] (==) Assigned the driver to the xf86ConfigLayout
> [ 20.995] (II) LoadModule: "intel"
> [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
> [ 20.996] (II) Module intel: vendor="X.Org Foundation"
> [ 20.996] compiled for 1.18.4, module version = 2.99.917
> [ 20.996] Module class: X.Org Video Driver
> [ 20.996] ABI class: X.Org Video Driver, version 20.0
> [ 20.996] (II) UnloadModule: "intel"
> [ 20.996] (II) Unloading intel
> [ 20.996] (II) Failed to load module "intel" (already loaded, 22067)
> [ 20.996] (II) LoadModule: "nvidia"
> [ 20.996] (WW) Warning, couldn't open module nvidia
> [ 20.996] (II) UnloadModule: "nvidia"
> [ 20.996] (II) Unloading nvidia
> [ 20.996] (EE) Failed to load module "nvidia" (module does not exist, 0)
> [ 20.996] (II) LoadModule: "nouveau"
> [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
> [ 20.996] (II) Module nouveau: vendor="X.Org Foundation"
> [ 20.996] compiled for 1.18.3, module version = 1.0.13
> [ 20.996] Module class: X.Org Video Driver
> [ 20.996] ABI class: X.Org Video Driver, version 20.0
> [ 20.996] (II) UnloadModule: "nouveau"
> [ 20.996] (II) Unloading nouveau
> [ 20.996] (II) Failed to load module "nouveau" (already loaded, 0)
> [ 20.996] (II) LoadModule: "modesetting"
> [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
> [ 20.996] (II) Module modesetting: vendor="X.Org Foundation"
> [ 20.996] compiled for 1.18.4, module version = 1.18.4
> [ 20.996] Module class: X.Org Video Driver
> [ 20.996] ABI class: X.Org Video Driver, version 20.0
> [ 20.996] (II) UnloadModule: "modesetting"
> [ 20.996] (II) Unloading modesetting
> [ 20.996] (II) Failed to load module "modesetting" (already loaded, 0)
> [ 20.996] (II) LoadModule: "fbdev"
> [ 20.996] (WW) Warning, couldn't open module fbdev
> [ 20.996] (II) UnloadModule: "fbdev"
> [ 20.996] (II) Unloading fbdev
> [ 20.996] (EE) Failed to load module "fbdev" (module does not exist, 0)
> [ 20.996] (II) LoadModule: "vesa"
> [ 20.997] (WW) Warning, couldn't open module vesa
> [ 20.997] (II) UnloadModule: "vesa"
> [ 20.997] (II) Unloading vesa
> [ 20.997] (EE) Failed to load module "vesa" (module does not exist, 0)
> [ 20.997] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
> i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
> 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
> Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
> GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
> [ 20.997] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
> [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
> [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
> [ 20.997] (II) NOUVEAU driver
> [ 20.997] (II) NOUVEAU driver for NVIDIA chipset families :
> [ 20.997] RIVA TNT (NV04)
> [ 20.997] RIVA TNT2 (NV05)
> [ 20.997] GeForce 256 (NV10)
> [ 20.997] GeForce 2 (NV11, NV15)
> [ 20.997] GeForce 4MX (NV17, NV18)
> [ 20.997] GeForce 3 (NV20)
> [ 20.997] GeForce 4Ti (NV25, NV28)
> [ 20.997] GeForce FX (NV3x)
> [ 20.997] GeForce 6 (NV4x)
> [ 20.997] GeForce 7 (G7x)
> [ 20.997] GeForce 8 (G8x)
> [ 20.997] GeForce GTX 200 (NVA0)
> [ 20.997] GeForce GTX 400 (NVC0)
> [ 20.997] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
> [ 21.020] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
> [ 21.020] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git1610121931.eb01cc~gd~x (Oibaf <fmrummey at gmail.com>)
> [ 21.020] (II) intel(0): SNA compiled for use with valgrind
> [ 21.022] (II) [drm] nouveau interface version: 1.3.1
> [ 21.022] (EE) Unknown chipset: NV118
> [ 21.022] (WW) Falling back to old probe method for modesetting
> [ 21.024] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 5500
> [ 21.024] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
> [ 21.024] (II) intel(0): Creating default Display subsection in Screen section
> "Default Screen Section" for depth/fbbpp 24/32
> [ 21.024] (==) intel(0): Depth 24, (--) framebuffer bpp 32
> [ 21.024] (==) intel(0): RGB weight 888
> [ 21.024] (==) intel(0): Default visual is TrueColor
> [ 21.024] (II) intel(0): Output eDP1 has no monitor section
> [ 21.052] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
> [ 21.052] (II) intel(0): Enabled output eDP1
> [ 21.052] (II) intel(0): Output DP1 has no monitor section
> [ 21.052] (II) intel(0): Enabled output DP1
> [ 21.052] (II) intel(0): Output HDMI1 has no monitor section
> [ 21.052] (II) intel(0): Enabled output HDMI1
> [ 21.052] (II) intel(0): Output DP2 has no monitor section
> [ 21.052] (II) intel(0): Enabled output DP2
> [ 21.052] (II) intel(0): Output HDMI2 has no monitor section
> [ 21.052] (II) intel(0): Enabled output HDMI2
> [ 21.052] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
> [ 21.052] (II) intel(0): Output VIRTUAL1 has no monitor section
> [ 21.052] (II) intel(0): Enabled output VIRTUAL1
> [ 21.052] (--) intel(0): Output eDP1 using initial mode 2880x1620 on pipe 0
> [ 21.052] (--) intel(0): Output DP1 using initial mode 2560x1440 on pipe 1
> [ 21.052] (==) intel(0): TearFree enabled
> [ 21.052] (==) intel(0): DPI set to (96, 96)
> [ 21.052] (II) Loading sub module "dri2"
> [ 21.052] (II) LoadModule: "dri2"
> [ 21.053] (II) Module "dri2" already built-in
> [ 21.053] (II) Loading sub module "present"
> [ 21.053] (II) LoadModule: "present"
> [ 21.053] (II) Module "present" already built-in
> [ 21.053] (==) Depth 24 pixmap format is 32 bpp
> [ 21.058] (II) intel(0): SNA initialized with Broadwell (gen8) backend
> [ 21.058] (==) intel(0): Backing store enabled
> [ 21.058] (==) intel(0): Silken mouse enabled
> [ 21.060] (II) intel(0): HW Cursor enabled
> [ 21.060] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
> [ 21.061] (==) intel(0): DPMS enabled
> [ 21.061] (==) intel(0): Display hotplug detection enabled
> [ 21.061] (II) intel(0): [DRI2] Setup complete
> [ 21.061] (II) intel(0): [DRI2] DRI driver: i965
> [ 21.061] (II) intel(0): [DRI2] VDPAU driver: va_gl
> [ 21.061] (II) intel(0): direct rendering: DRI2 enabled
> [ 21.061] (II) intel(0): hardware support for Present enabled
> [ 21.061] (--) RandR disabled
> [ 21.067] (II) SELinux: Disabled on system
> [ 21.115] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context
> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_profile
> [ 21.115] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
> [ 21.115] (II) AIGLX: enabled GLX_INTEL_swap_event
> [ 21.115] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
> [ 21.115] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
> [ 21.115] (II) AIGLX: enabled GLX_ARB_fbconfig_float
> [ 21.115] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
> [ 21.115] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
> [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_robustness
> [ 21.116] (II) AIGLX: Loaded and initialized i965
> [ 21.116] (II) GLX: Initialized DRI2 GL provider for screen 0
> [ 21.125] (II) intel(0): switch to mode 2880x1620 at 60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
> [ 21.126] (II) intel(0): switch to mode 2560x1440 at 60.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
> [ 21.127] (II) intel(0): Setting screen physical size to 762 x 428
> [ 21.271] (II) config/udev: Adding input device Power Button (/dev/input/event3)
> [ 21.276] (**) Power Button: Applying InputClass "evdev keyboard catchall"
> [ 21.276] (II) LoadModule: "evdev"
> [ 21.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
> [ 21.279] (II) Module evdev: vendor="X.Org Foundation"
> [ 21.280] compiled for 1.18.1, module version = 2.10.1
> [ 21.280] Module class: X.Org XInput Driver
> [ 21.280] ABI class: X.Org XInput driver, version 22.1
> [ 21.280] (II) Using input driver 'evdev' for 'Power Button'
> [ 21.280] (**) Power Button: always reports core events
> [ 21.280] (**) evdev: Power Button: Device: "/dev/input/event3"
> [ 21.280] (--) evdev: Power Button: Vendor 0 Product 0x1
> [ 21.280] (--) evdev: Power Button: Found keys
> [ 21.280] (II) evdev: Power Button: Configuring as keyboard
> [ 21.280] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
> [ 21.280] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
> [ 21.280] (**) Option "xkb_rules" "evdev"
> [ 21.280] (**) Option "xkb_model" "pc105"
> [ 21.280] (**) Option "xkb_layout" "dk"
> [ 21.359] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
> [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
> [ 21.359] (II) Using input driver 'evdev' for 'Video Bus'
> [ 21.359] (**) Video Bus: always reports core events
> [ 21.359] (**) evdev: Video Bus: Device: "/dev/input/event15"
> [ 21.359] (--) evdev: Video Bus: Vendor 0 Product 0x6
> [ 21.359] (--) evdev: Video Bus: Found keys
> [ 21.359] (II) evdev: Video Bus: Configuring as keyboard
> [ 21.359] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event15"
> [ 21.359] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
> [ 21.359] (**) Option "xkb_rules" "evdev"
> [ 21.359] (**) Option "xkb_model" "pc105"
> [ 21.359] (**) Option "xkb_layout" "dk"
> [ 21.359] (II) config/udev: Adding input device Video Bus (/dev/input/event16)
> [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
> [ 21.361] (II) Using input driver 'evdev' for 'Video Bus'
> [ 21.361] (**) Video Bus: always reports core events
> [ 21.361] (**) evdev: Video Bus: Device: "/dev/input/event16"
> [ 21.361] (--) evdev: Video Bus: Vendor 0 Product 0x6
> [ 21.361] (--) evdev: Video Bus: Found keys
> [ 21.361] (II) evdev: Video Bus: Configuring as keyboard
> [ 21.361] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input17/event16"
> [ 21.361] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
> [ 21.361] (**) Option "xkb_rules" "evdev"
> [ 21.361] (**) Option "xkb_model" "pc105"
> [ 21.361] (**) Option "xkb_layout" "dk"
> [ 21.362] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
> [ 21.362] (II) No input driver specified, ignoring this device.
> [ 21.362] (II) This device may have been added with another device file.
> [ 21.362] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
> [ 21.362] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
> [ 21.362] (II) Using input driver 'evdev' for 'Sleep Button'
> [ 21.362] (**) Sleep Button: always reports core events
> [ 21.362] (**) evdev: Sleep Button: Device: "/dev/input/event2"
> [ 21.362] (--) evdev: Sleep Button: Vendor 0 Product 0x3
> [ 21.364] (--) evdev: Sleep Button: Found keys
> [ 21.364] (II) evdev: Sleep Button: Configuring as keyboard
> [ 21.364] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
> [ 21.364] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
> [ 21.364] (**) Option "xkb_rules" "evdev"
> [ 21.364] (**) Option "xkb_model" "pc105"
> [ 21.364] (**) Option "xkb_layout" "dk"
> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event18)
> [ 21.365] (II) No input driver specified, ignoring this device.
> [ 21.365] (II) This device may have been added with another device file.
> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event19)
> [ 21.365] (II) No input driver specified, ignoring this device.
> [ 21.365] (II) This device may have been added with another device file.
> [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event20)
> [ 21.365] (II) No input driver specified, ignoring this device.
> [ 21.365] (II) This device may have been added with another device file.
> [ 21.366] (II) config/udev: Adding input device Logitech M705 (/dev/input/event4)
> [ 21.366] (**) Logitech M705: Applying InputClass "evdev pointer catchall"
> [ 21.366] (II) Using input driver 'evdev' for 'Logitech M705'
> [ 21.366] (**) Logitech M705: always reports core events
> [ 21.366] (**) evdev: Logitech M705: Device: "/dev/input/event4"
> [ 21.366] (--) evdev: Logitech M705: Vendor 0x46d Product 0x101b
> [ 21.366] (--) evdev: Logitech M705: Found 20 mouse buttons
> [ 21.366] (--) evdev: Logitech M705: Found scroll wheel(s)
> [ 21.366] (--) evdev: Logitech M705: Found relative axes
> [ 21.366] (--) evdev: Logitech M705: Found x and y relative axes
> [ 21.366] (II) evdev: Logitech M705: Configuring as mouse
> [ 21.366] (II) evdev: Logitech M705: Adding scrollwheel support
> [ 21.366] (**) evdev: Logitech M705: YAxisMapping: buttons 4 and 5
> [ 21.366] (**) evdev: Logitech M705: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> [ 21.366] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input6/event4"
> [ 21.366] (II) XINPUT: Adding extended input device "Logitech M705" (type: MOUSE, id 10)
> [ 21.366] (II) evdev: Logitech M705: initialized for relative axes.
> [ 21.366] (**) Logitech M705: (accel) keeping acceleration scheme 1
> [ 21.366] (**) Logitech M705: (accel) acceleration profile 0
> [ 21.366] (**) Logitech M705: (accel) acceleration factor: 2.000
> [ 21.366] (**) Logitech M705: (accel) acceleration threshold: 4
> [ 21.367] (II) config/udev: Adding input device Logitech M705 (/dev/input/mouse0)
> [ 21.367] (II) No input driver specified, ignoring this device.
> [ 21.367] (II) This device may have been added with another device file.
> [ 21.367] (II) config/udev: Adding input device Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) (/dev/input/event6)
> [ 21.367] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard catchall"
> [ 21.367] (II) Using input driver 'evdev' for 'Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )'
> [ 21.367] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): always reports core events
> [ 21.367] (**) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Device: "/dev/input/event6"
> [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b
> [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Found keys
> [ 21.367] (II) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Configuring as keyboard
> [ 21.367] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.0/0003:04B3:301B.0005/input/input8/event6"
> [ 21.367] (II) XINPUT: Adding extended input device "Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )" (type: KEYBOARD, id 11)
> [ 21.367] (**) Option "xkb_rules" "evdev"
> [ 21.367] (**) Option "xkb_model" "pc105"
> [ 21.367] (**) Option "xkb_layout" "dk"
> [ 21.368] (II) config/udev: Adding input device Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) (/dev/input/event7)
> [ 21.368] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard catchall"
> [ 21.368] (II) Using input driver 'evdev' for 'Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )'
> [ 21.368] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): always reports core events
> [ 21.368] (**) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Device: "/dev/input/event7"
> [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b
> [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Found keys
> [ 21.368] (II) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Configuring as keyboard
> [ 21.368] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.1/0003:04B3:301B.0006/input/input9/event7"
> [ 21.368] (II) XINPUT: Adding extended input device "Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )" (type: KEYBOARD, id 12)
> [ 21.368] (**) Option "xkb_rules" "evdev"
> [ 21.368] (**) Option "xkb_model" "pc105"
> [ 21.368] (**) Option "xkb_layout" "dk"
> [ 21.369] (II) config/udev: Adding input device Integrated Camera (/dev/input/event17)
> [ 21.369] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
> [ 21.369] (II) Using input driver 'evdev' for 'Integrated Camera'
> [ 21.369] (**) Integrated Camera: always reports core events
> [ 21.369] (**) evdev: Integrated Camera: Device: "/dev/input/event17"
> [ 21.369] (--) evdev: Integrated Camera: Vendor 0x5986 Product 0x366
> [ 21.369] (--) evdev: Integrated Camera: Found keys
> [ 21.369] (II) evdev: Integrated Camera: Configuring as keyboard
> [ 21.369] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input18/event17"
> [ 21.369] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 13)
> [ 21.369] (**) Option "xkb_rules" "evdev"
> [ 21.369] (**) Option "xkb_model" "pc105"
> [ 21.369] (**) Option "xkb_layout" "dk"
> [ 21.370] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
> [ 21.370] (II) No input driver specified, ignoring this device.
> [ 21.370] (II) This device may have been added with another device file.
> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event11)
> [ 21.370] (II) No input driver specified, ignoring this device.
> [ 21.370] (II) This device may have been added with another device file.
> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
> [ 21.370] (II) No input driver specified, ignoring this device.
> [ 21.370] (II) This device may have been added with another device file.
> [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event13)
> [ 21.370] (II) No input driver specified, ignoring this device.
> [ 21.370] (II) This device may have been added with another device file.
> [ 21.375] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
> [ 21.375] (II) No input driver specified, ignoring this device.
> [ 21.375] (II) This device may have been added with another device file.
> [ 21.375] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
> [ 21.375] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
> [ 21.375] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
> [ 21.375] (**) AT Translated Set 2 keyboard: always reports core events
> [ 21.375] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
> [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
> [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Found keys
> [ 21.375] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
> [ 21.375] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
> [ 21.375] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
> [ 21.375] (**) Option "xkb_rules" "evdev"
> [ 21.375] (**) Option "xkb_model" "pc105"
> [ 21.375] (**) Option "xkb_layout" "dk"
> [ 21.376] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
> [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
> [ 21.376] (II) LoadModule: "synaptics"
> [ 21.376] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
> [ 21.381] (II) Module synaptics: vendor="X.Org Foundation"
> [ 21.381] compiled for 1.18.1, module version = 1.8.2
> [ 21.381] Module class: X.Org XInput Driver
> [ 21.381] ABI class: X.Org XInput driver, version 22.1
> [ 21.381] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
> [ 21.381] (**) SynPS/2 Synaptics TouchPad: always reports core events
> [ 21.381] (**) Option "Device" "/dev/input/event5"
> [ 21.464] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1266 - 5676 (res 45)
> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1096 - 4758 (res 68)
> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
> [ 21.464] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
> [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
> [ 21.464] (**) SynPS/2 Synaptics TouchPad: always reports core events
> [ 21.500] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
> [ 21.500] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
> [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
> [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
> [ 21.500] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
> [ 21.500] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
> [ 21.500] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
> [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event8)
> [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
> [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "trackpoint catchall"
> [ 21.501] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
> [ 21.501] (**) TPPS/2 IBM TrackPoint: always reports core events
> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
> [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
> [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
> [ 21.501] (**) Option "Emulate3Buttons" "true"
> [ 21.501] (**) Option "EmulateWheel" "true"
> [ 21.501] (**) Option "EmulateWheelButton" "2"
> [ 21.501] (**) Option "YAxisMapping" "4 5"
> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
> [ 21.501] (**) Option "XAxisMapping" "6 7"
> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
> [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> [ 21.501] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input7/event8"
> [ 21.501] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 16)
> [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
> [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
> [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
> [ 21.501] (II) No input driver specified, ignoring this device.
> [ 21.501] (II) This device may have been added with another device file.
> [ 21.502] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9)
> [ 21.502] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
> [ 21.502] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
> [ 21.502] (**) ThinkPad Extra Buttons: always reports core events
> [ 21.502] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9"
> [ 21.502] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
> [ 21.502] (--) evdev: ThinkPad Extra Buttons: Found keys
> [ 21.502] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
> [ 21.502] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input10/event9"
> [ 21.502] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17)
> [ 21.502] (**) Option "xkb_rules" "evdev"
> [ 21.502] (**) Option "xkb_model" "pc105"
> [ 21.502] (**) Option "xkb_layout" "dk"
> [ 23.053] (II) intel(0): EDID vendor "MEI", prod id 38562
> [ 23.053] (II) intel(0): EDID quirk: Use maximum size instead of detailed timing sizes.
> [ 23.053] (II) intel(0): Using EDID range info for horizontal sync
> [ 23.053] (II) intel(0): Using EDID range info for vertical refresh
> [ 23.053] (II) intel(0): Printing DDC gathered Modelines:
> [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
> [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
> [ 23.909] (II) intel(0): resizing framebuffer to 5440x1620
> [ 23.960] (II) intel(0): switch to mode 2560x1440 at 60.0 on DP1 using pipe 1, position (2880, 0), rotation normal, reflection none
> _______________________________________________
> Nouveau mailing list
> Nouveau at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/nouveau
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/nouveau/attachments/20161027/f22dd5f6/attachment-0001.sig>
More information about the Nouveau
mailing list