[Nouveau] [Bug 95520] Error when recovering from suspend mode: fifo: ce0 engine fault on channel 0

Mon Feb 20 16:33:30 UTC 2017

https://bugs.freedesktop.org/show_bug.cgi?id=95520

--- Comment #3 from mail-freedesktopbugs at juliankessel.de ---
I'm having a similar situation like Géza Búz, the two external DisplayPort
connected Displays get a signal, but only the frozen cursor on black background
is visible. No further interaction is possible, no shell switching,
ctrl-alt-delete etc. Unfortunately, this is not reproducible every time I
suspend the system.
On reboot, the system hangs in a state after kernel selection/grub, where the
fan runs high but no output is shown on any screen, the system is frozen.
Only after several reboot attempts (~3) the boot runs normally again.

(a recent memtest did not report errors)

Environment:
 - Linux kernel 4.4.46
 - Desktop environment: KDE Plasma 5.8.3
 - Xorg 1.18.3
 - Graphics card: NVIDIA Corporation GF108GLM [Quadro 1000M] (rev a1)


Feb 20 16:39:18 linux-sc6n.suse kernel: ACPI: Waking up from system sleep state
S3
Feb 20 16:39:18 linux-sc6n.suse kernel: ehci-pci 0000:00:1a.0: System wakeup
disabled by ACPI
Feb 20 16:39:18 linux-sc6n.suse kernel: ehci-pci 0000:00:1d.0: System wakeup
disabled by ACPI
Feb 20 16:39:18 linux-sc6n.suse kernel: pcieport 0000:00:1c.6: System wakeup
disabled by ACPI
Feb 20 16:39:18 linux-sc6n.suse kernel: sdhci-pci 0000:0d:00.0: MMC controller
base frequency changed to 50Mhz.
Feb 20 16:39:18 linux-sc6n.suse kernel: PM: noirq resume of devices complete
after 18.717 msecs
Feb 20 16:39:18 linux-sc6n.suse kernel: PM: early resume of devices complete
after 0.646 msecs
Feb 20 16:39:18 linux-sc6n.suse kernel: e1000e 0000:00:19.0: System wakeup
disabled by ACPI
Feb 20 16:39:18 linux-sc6n.suse kernel: nouveau 0000:01:00.0: DRM: resuming
kernel object tree...
Feb 20 16:39:18 linux-sc6n.suse kernel: usb usb2: root hub lost power or was
reset
Feb 20 16:39:18 linux-sc6n.suse kernel: usb usb3: root hub lost power or was
reset
Feb 20 16:39:18 linux-sc6n.suse kernel: rtc_cmos 00:02: System wakeup disabled
by ACPI
Feb 20 16:39:18 linux-sc6n.suse kernel: sd 0:0:0:0: [sda] Starting disk
Feb 20 16:39:18 linux-sc6n.suse kernel: usb 1-1.6: reset high-speed USB device
number 5 using ehci-pci
Feb 20 16:39:18 linux-sc6n.suse kernel: usb 4-1.5: reset full-speed USB device
number 3 using ehci-pci
Feb 20 16:39:18 linux-sc6n.suse kernel: ata2: SATA link down (SStatus 0
SControl 300)
Feb 20 16:39:18 linux-sc6n.suse kernel: ata5: SATA link down (SStatus 0
SControl 300)
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1: SATA link up 6.0 Gbps (SStatus
133 SControl 300)
Feb 20 16:39:18 linux-sc6n.suse kernel: ata4: SATA link down (SStatus 0
SControl 300)
Feb 20 16:39:18 linux-sc6n.suse kernel: nouveau 0000:01:00.0: DRM: resuming
client object trees...
Feb 20 16:39:18 linux-sc6n.suse kernel: nouveau 0000:01:00.0: DRM: resuming
display...
Feb 20 16:39:18 linux-sc6n.suse kernel: usb 1-1.5: reset high-speed USB device
number 7 using ehci-pci
Feb 20 16:39:18 linux-sc6n.suse kernel: nouveau 0000:01:00.0: DRM: resuming
console...
Feb 20 16:39:18 linux-sc6n.suse kernel: usb 1-1.4: reset full-speed USB device
number 3 using ehci-pci
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0
(SET FEATURES) succeeded
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0
(SECURITY FREEZE LOCK) filtered out
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0
(SET FEATURES) filtered out
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0
(SET FEATURES) succeeded
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0
(SECURITY FREEZE LOCK) filtered out
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0
(SET FEATURES) filtered out
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1.00: configured for UDMA/133
Feb 20 16:39:18 linux-sc6n.suse kernel: usb 1-1.5.4: reset low-speed USB device
number 8 using ehci-pci
Feb 20 16:39:18 linux-sc6n.suse kernel: snd_hda_codec_hdmi hdaudioC1D2: HDMI:
audio coding type 0 not expected
Feb 20 16:39:18 linux-sc6n.suse kernel: PM: resume of devices complete after
1241.680 msecs
Feb 20 16:39:18 linux-sc6n.suse kernel: usb 1-1.4:1.0: rebind failed: -517
Feb 20 16:39:18 linux-sc6n.suse kernel: usb 1-1.4:1.1: rebind failed: -517
Feb 20 16:39:18 linux-sc6n.suse kernel: PM: Finishing wakeup.
Feb 20 16:39:18 linux-sc6n.suse kernel: Restarting tasks ... done.
Feb 20 16:39:18 linux-sc6n.suse systemd[1]: Time has been changed
Feb 20 16:39:18 linux-sc6n.suse kernel: nouveau 0000:01:00.0: fifo: read fault
at 0003ae0000 engine 15 [PCE0] client 01 [PCOPY0] reason 02 [PAGE_NOT_PRESENT]
on channel 0 [003fe14000 DRM]
Feb 20 16:39:18 linux-sc6n.suse kernel: nouveau 0000:01:00.0: fifo: ce0 engine
fault on channel 0, recovering...
Feb 20 16:39:18 linux-sc6n.suse NetworkManager[1218]: <info>  (eth0): link
disconnected
Feb 20 16:39:18 linux-sc6n.suse systemd[2673]: Time has been changed
Feb 20 16:39:18 linux-sc6n.suse NetworkManager[1218]: <info>  (eth0): device
state change: disconnected -> unavailable (reason 'carrier-changed') [30 20 40]
Feb 20 16:39:18 linux-sc6n.suse bluetoothd[1096]: Endpoint unregistered:
sender=:1.39 path=/MediaEndpoint/A2DPSource
Feb 20 16:39:18 linux-sc6n.suse systemd-sleep[31277]: System resumed.
Feb 20 16:39:18 linux-sc6n.suse bluetoothd[1096]: Endpoint unregistered:
sender=:1.39 path=/MediaEndpoint/A2DPSink
Feb 20 16:39:18 linux-sc6n.suse systemd[1]: Starting Load/Save RF Kill Switch
Status...
Feb 20 16:39:18 linux-sc6n.suse systemd[1]: bluetooth.target: Unit not needed
anymore. Stopping.
Feb 20 16:39:18 linux-sc6n.suse systemd[1]: Stopped target Bluetooth.
Feb 20 16:39:18 linux-sc6n.suse systemd[1]: Started Load/Save RF Kill Switch
Status.
Feb 20 16:39:18 linux-sc6n.suse systemd-sleep[31277]: INFO: Skip running
/usr/lib/systemd/system-sleep/grub2.sleep for suspend
Feb 20 16:39:18 linux-sc6n.suse systemd[1]: Started Suspend.
Feb 20 16:39:18 linux-sc6n.suse kernel: smpboot: Booting Node 0 Processor 3
APIC 0x3
Feb 20 16:39:18 linux-sc6n.suse kernel: Disabled fast string operations
Feb 20 16:39:18 linux-sc6n.suse kernel:  cache: parent cpu3 should not be
sleeping
Feb 20 16:39:18 linux-sc6n.suse kernel: CPU3 is up
Feb 20 16:39:18 linux-sc6n.suse kernel: smpboot: Booting Node 0 Processor 4
APIC 0x4
Feb 20 16:39:18 linux-sc6n.suse kernel: Disabled fast string operations
Feb 20 16:39:18 linux-sc6n.suse kernel:  cache: parent cpu4 should not be
sleeping
Feb 20 16:39:18 linux-sc6n.suse kernel: CPU4 is up
Feb 20 16:39:18 linux-sc6n.suse kernel: smpboot: Booting Node 0 Processor 5
APIC 0x5
Feb 20 16:39:18 linux-sc6n.suse kernel: Disabled fast string operations
Feb 20 16:39:18 linux-sc6n.suse kernel:  cache: parent cpu5 should not be
sleeping
Feb 20 16:39:18 linux-sc6n.suse kernel: CPU5 is up
Feb 20 16:39:18 linux-sc6n.suse kernel: smpboot: Booting Node 0 Processor 6
APIC 0x6
Feb 20 16:39:18 linux-sc6n.suse kernel: Disabled fast string operations
Feb 20 16:39:18 linux-sc6n.suse kernel:  cache: parent cpu6 should not be
sleeping
Feb 20 16:39:18 linux-sc6n.suse kernel: CPU6 is up
Feb 20 16:39:18 linux-sc6n.suse kernel: smpboot: Booting Node 0 Processor 7
APIC 0x7
Feb 20 16:39:18 linux-sc6n.suse kernel: Disabled fast string operations
Feb 20 16:39:18 linux-sc6n.suse kernel:  cache: parent cpu7 should not be
sleeping
Feb 20 16:39:18 linux-sc6n.suse kernel: CPU7 is up
Feb 20 16:39:18 linux-sc6n.suse kernel: ACPI: Waking up from system sleep state
S3
Feb 20 16:39:18 linux-sc6n.suse kernel: ehci-pci 0000:00:1a.0: System wakeup
disabled by ACPI
Feb 20 16:39:18 linux-sc6n.suse kernel: ehci-pci 0000:00:1d.0: System wakeup
disabled by ACPI
Feb 20 16:39:18 linux-sc6n.suse kernel: pcieport 0000:00:1c.6: System wakeup
disabled by ACPI
Feb 20 16:39:18 linux-sc6n.suse kernel: sdhci-pci 0000:0d:00.0: MMC controller
base frequency changed to 50Mhz.
Feb 20 16:39:18 linux-sc6n.suse kernel: PM: noirq resume of devices complete
after 18.717 msecs
Feb 20 16:39:18 linux-sc6n.suse kernel: PM: early resume of devices complete
after 0.646 msecs
Feb 20 16:39:18 linux-sc6n.suse kernel: e1000e 0000:00:19.0: System wakeup
disabled by ACPI
Feb 20 16:39:18 linux-sc6n.suse kernel: nouveau 0000:01:00.0: DRM: resuming
kernel object tree...
Feb 20 16:39:18 linux-sc6n.suse kernel: usb usb2: root hub lost power or was
reset
Feb 20 16:39:18 linux-sc6n.suse kernel: usb usb3: root hub lost power or was
reset
Feb 20 16:39:18 linux-sc6n.suse kernel: rtc_cmos 00:02: System wakeup disabled
by ACPI
Feb 20 16:39:18 linux-sc6n.suse kernel: sd 0:0:0:0: [sda] Starting disk
Feb 20 16:39:18 linux-sc6n.suse kernel: usb 1-1.6: reset high-speed USB device
number 5 using ehci-pci
Feb 20 16:39:18 linux-sc6n.suse kernel: usb 4-1.5: reset full-speed USB device
number 3 using ehci-pci
Feb 20 16:39:18 linux-sc6n.suse kernel: ata2: SATA link down (SStatus 0
SControl 300)
Feb 20 16:39:18 linux-sc6n.suse kernel: ata5: SATA link down (SStatus 0
SControl 300)
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1: SATA link up 6.0 Gbps (SStatus
133 SControl 300)
Feb 20 16:39:18 linux-sc6n.suse kernel: ata4: SATA link down (SStatus 0
SControl 300)
Feb 20 16:39:18 linux-sc6n.suse kernel: nouveau 0000:01:00.0: DRM: resuming
client object trees...
Feb 20 16:39:18 linux-sc6n.suse kernel: nouveau 0000:01:00.0: DRM: resuming
display...
Feb 20 16:39:18 linux-sc6n.suse kernel: usb 1-1.5: reset high-speed USB device
number 7 using ehci-pci
Feb 20 16:39:18 linux-sc6n.suse kernel: nouveau 0000:01:00.0: DRM: resuming
console...
Feb 20 16:39:18 linux-sc6n.suse kernel: usb 1-1.4: reset full-speed USB device
number 3 using ehci-pci
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0
(SET FEATURES) succeeded
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0
(SECURITY FREEZE LOCK) filtered out
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0
(SET FEATURES) filtered out
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0
(SET FEATURES) succeeded
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0
(SECURITY FREEZE LOCK) filtered out
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0
(SET FEATURES) filtered out
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0
(SET FEATURES) filtered out
Feb 20 16:39:18 linux-sc6n.suse kernel: ata1.00: configured for UDMA/133
Feb 20 16:39:18 linux-sc6n.suse kernel: usb 1-1.5.4: reset low-speed USB device
number 8 using ehci-pci
Feb 20 16:39:18 linux-sc6n.suse kernel: snd_hda_codec_hdmi hdaudioC1D2: HDMI:
audio coding type 0 not expected
Feb 20 16:39:18 linux-sc6n.suse kernel: PM: resume of devices complete after
1241.680 msecs
Feb 20 16:39:18 linux-sc6n.suse kernel: usb 1-1.4:1.0: rebind failed: -517
Feb 20 16:39:18 linux-sc6n.suse kernel: usb 1-1.4:1.1: rebind failed: -517
Feb 20 16:39:18 linux-sc6n.suse kernel: PM: Finishing wakeup.
Feb 20 16:39:18 linux-sc6n.suse kernel: Restarting tasks ... done.
Feb 20 16:39:18 linux-sc6n.suse systemd[1]: Time has been changed
Feb 20 16:39:18 linux-sc6n.suse kernel: nouveau 0000:01:00.0: fifo: read fault
at 0003ae0000 engine 15 [PCE0] client 01 [PCOPY0] reason 02 [PAGE_NOT_PRESENT]
on channel 0 [003fe14000 DRM]
Feb 20 16:39:18 linux-sc6n.suse kernel: nouveau 0000:01:00.0: fifo: ce0 engine
fault on channel 0, recovering...
Feb 20 16:39:18 linux-sc6n.suse NetworkManager[1218]: <info>  (eth0): link
disconnected
Feb 20 16:39:18 linux-sc6n.suse systemd[2673]: Time has been changed
(In reply to Géza Búza from comment #0)
> Created attachment 123963 [details]
> Kernel log
> 
> Environment:
>  - Linux kernel 4.5.4
>  - Desktop environment: Gnome 3.20.2
>  - Xorg 1.18.3
>  - Graphics card: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1)
> 
> Nouveau makes Xorg unresponsive after resuming from suspend to RAM.
> Restarting Xorg did not help, but a reboot.
> 
> Error messages look like:
> nouveau 0000:01:00.0: fifo: read fault at 0000dc8000 engine 15 [CE0] client
> 01 [CE0] reason 02 [PTE] on channel 0 [007fd56000 DRM]
> nouveau 0000:01:00.0: fifo: ce0 engine fault on channel 0, recovering...
> 
> It must be a regression, because the issue did not happen with the same
> hardware on kernel 4.4.x.

(In reply to Géza Búza from comment #0)
> Created attachment 123963 [details]
> Kernel log
> 
> Environment:
>  - Linux kernel 4.5.4
>  - Desktop environment: Gnome 3.20.2
>  - Xorg 1.18.3
>  - Graphics card: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1)
> 
> Nouveau makes Xorg unresponsive after resuming from suspend to RAM.
> Restarting Xorg did not help, but a reboot.
> 
> Error messages look like:
> nouveau 0000:01:00.0: fifo: read fault at 0000dc8000 engine 15 [CE0] client
> 01 [CE0] reason 02 [PTE] on channel 0 [007fd56000 DRM]
> nouveau 0000:01:00.0: fifo: ce0 engine fault on channel 0, recovering...
> 
> It must be a regression, because the issue did not happen with the same
> hardware on kernel 4.4.x.

(In reply to Géza Búza from comment #0)
> Created attachment 123963 [details]
> Kernel log
> 
> Environment:
>  - Linux kernel 4.5.4
>  - Desktop environment: Gnome 3.20.2
>  - Xorg 1.18.3
>  - Graphics card: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1)
> 
> Nouveau makes Xorg unresponsive after resuming from suspend to RAM.
> Restarting Xorg did not help, but a reboot.
> 
> Error messages look like:
> nouveau 0000:01:00.0: fifo: read fault at 0000dc8000 engine 15 [CE0] client
> 01 [CE0] reason 02 [PTE] on channel 0 [007fd56000 DRM]
> nouveau 0000:01:00.0: fifo: ce0 engine fault on channel 0, recovering...
> 
> It must be a regression, because the issue did not happen with the same
> hardware on kernel 4.4.x.

(In reply to Géza Búza from comment #0)
> Created attachment 123963 [details]
> Kernel log
> 
> Environment:
>  - Linux kernel 4.5.4
>  - Desktop environment: Gnome 3.20.2
>  - Xorg 1.18.3
>  - Graphics card: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1)
> 
> Nouveau makes Xorg unresponsive after resuming from suspend to RAM.
> Restarting Xorg did not help, but a reboot.
> 
> Error messages look like:
> nouveau 0000:01:00.0: fifo: read fault at 0000dc8000 engine 15 [CE0] client
> 01 [CE0] reason 02 [PTE] on channel 0 [007fd56000 DRM]
> nouveau 0000:01:00.0: fifo: ce0 engine fault on channel 0, recovering...
> 
> It must be a regression, because the issue did not happen with the same
> hardware on kernel 4.4.x.

(In reply to Géza Búza from comment #0)
> Created attachment 123963 [details]
> Kernel log
> 
> Environment:
>  - Linux kernel 4.5.4
>  - Desktop environment: Gnome 3.20.2
>  - Xorg 1.18.3
>  - Graphics card: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1)
> 
> Nouveau makes Xorg unresponsive after resuming from suspend to RAM.
> Restarting Xorg did not help, but a reboot.
> 
> Error messages look like:
> nouveau 0000:01:00.0: fifo: read fault at 0000dc8000 engine 15 [CE0] client
> 01 [CE0] reason 02 [PTE] on channel 0 [007fd56000 DRM]
> nouveau 0000:01:00.0: fifo: ce0 engine fault on channel 0, recovering...
> 
> It must be a regression, because the issue did not happen with the same
> hardware on kernel 4.4.x.

(In reply to Géza Búza from comment #0)
> Created attachment 123963 [details]
> Kernel log
> 
> Environment:
>  - Linux kernel 4.5.4
>  - Desktop environment: Gnome 3.20.2
>  - Xorg 1.18.3
>  - Graphics card: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1)
> 
> Nouveau makes Xorg unresponsive after resuming from suspend to RAM.
> Restarting Xorg did not help, but a reboot.
> 
> Error messages look like:
> nouveau 0000:01:00.0: fifo: read fault at 0000dc8000 engine 15 [CE0] client
> 01 [CE0] reason 02 [PTE] on channel 0 [007fd56000 DRM]
> nouveau 0000:01:00.0: fifo: ce0 engine fault on channel 0, recovering...
> 
> It must be a regression, because the issue did not happen with the same
> hardware on kernel 4.4.x.

-- 
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/nouveau/attachments/20170220/bb8c2333/attachment-0001.html>