[Nouveau] [PATCH V3 10/29] drm/nouveau: deprecate pci_get_bus_and_slot()
Sinan Kaya
okaya at codeaurora.org
Mon Nov 27 16:57:47 UTC 2017
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Replace pci_get_bus_and_slot() with pci_get_domain_bus_and_slot()
and extract the domain number from
1. struct pci_dev
2. struct pci_dev through drm_device->pdev
3. struct pci_dev through fb->subdev->drm_device->pdev
Signed-off-by: Sinan Kaya <okaya at codeaurora.org>
---
drivers/gpu/drm/nouveau/dispnv04/arb.c | 4 +++-
drivers/gpu/drm/nouveau/dispnv04/hw.c | 10 +++++++---
drivers/gpu/drm/nouveau/nouveau_drm.c | 3 ++-
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramnv1a.c | 10 +++++++++-
4 files changed, 21 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/dispnv04/arb.c b/drivers/gpu/drm/nouveau/dispnv04/arb.c
index 90075b6..c79160c 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/arb.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/arb.c
@@ -213,8 +213,10 @@ struct nv_sim_state {
if ((dev->pdev->device & 0xffff) == 0x01a0 /*CHIPSET_NFORCE*/ ||
(dev->pdev->device & 0xffff) == 0x01f0 /*CHIPSET_NFORCE2*/) {
uint32_t type;
+ int domain = pci_domain_nr(dev->pdev->bus);
- pci_read_config_dword(pci_get_bus_and_slot(0, 1), 0x7c, &type);
+ pci_read_config_dword(pci_get_domain_bus_and_slot(domain, 0, 1),
+ 0x7c, &type);
sim_data.memory_type = (type >> 12) & 1;
sim_data.memory_width = 64;
diff --git a/drivers/gpu/drm/nouveau/dispnv04/hw.c b/drivers/gpu/drm/nouveau/dispnv04/hw.c
index b985990..0c9bdf0 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/hw.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/hw.c
@@ -216,12 +216,15 @@
{
struct nvkm_pll_vals pllvals;
int ret;
+ int domain;
+
+ domain = pci_domain_nr(dev->pdev->bus);
if (plltype == PLL_MEMORY &&
(dev->pdev->device & 0x0ff0) == CHIPSET_NFORCE) {
uint32_t mpllP;
-
- pci_read_config_dword(pci_get_bus_and_slot(0, 3), 0x6c, &mpllP);
+ pci_read_config_dword(pci_get_domain_bus_and_slot(domain, 0, 3),
+ 0x6c, &mpllP);
mpllP = (mpllP >> 8) & 0xf;
if (!mpllP)
mpllP = 4;
@@ -232,7 +235,8 @@
(dev->pdev->device & 0xff0) == CHIPSET_NFORCE2) {
uint32_t clock;
- pci_read_config_dword(pci_get_bus_and_slot(0, 5), 0x4c, &clock);
+ pci_read_config_dword(pci_get_domain_bus_and_slot(domain, 0, 5),
+ 0x4c, &clock);
return clock / 1000;
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index 595630d..0b6c639 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -406,7 +406,8 @@ static int nouveau_drm_probe(struct pci_dev *pdev,
}
/* subfunction one is a hdmi audio device? */
- drm->hdmi_device = pci_get_bus_and_slot((unsigned int)pdev->bus->number,
+ drm->hdmi_device = pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus),
+ (unsigned int)pdev->bus->number,
PCI_DEVFN(PCI_SLOT(pdev->devfn), 1));
if (!drm->hdmi_device) {
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramnv1a.c b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramnv1a.c
index 3c6a871..8849b71 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramnv1a.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramnv1a.c
@@ -28,8 +28,16 @@
{
struct pci_dev *bridge;
u32 mem, mib;
+ int domain = 0;
+ struct pci_dev *pdev = NULL;
- bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 1));
+ if (dev_is_pci(fb->subdev.device->dev))
+ pdev = to_pci_dev(fb->subdev.device->dev);
+
+ if (pdev)
+ domain = pci_domain_nr(pdev->bus);
+
+ bridge = pci_get_domain_bus_and_slot(domain, 0, PCI_DEVFN(0, 1));
if (!bridge) {
nvkm_error(&fb->subdev, "no bridge device\n");
return -ENODEV;
--
1.9.1
More information about the Nouveau
mailing list