[Nouveau] [Bug 75985] [NVC1] HDMI audio device only visible after rescan

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=75985

--- Comment #33 from spamas at rambler.ru ---
My system specs:
i7-7700HQ + GTX 1060 6GB
Linux kernel version: 4.10.0-42-generic
Nvidia driver Version: 384.90
OS: Linux Mint 18.2

I can confirm that kernel module, posted by Maik Freudenberg [Comment 27], is
working fine on my system. Thank you for the fix. The HDMI audio device now
works as it should.

The steps I did to enable HDMI audio device:
1. Download and extract the file nvhda.tar.xz.
2. Run commands in terminal:
   make
   sudo make install
   echo nvhda | sudo tee -a /etc/initramfs-tools/modules
   echo "options nvhda load_state=1" | sudo tee /etc/modprobe.d/nvhda.conf
   sudo update-initramfs -u
3. Reboot.

With this fix, I did not notice any problems with power management or system
stability. HDMI audio works at system startup, after resume from sleep, after
plugging/unplugging HDMI cable.

-- 
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/nouveau/attachments/20180104/560f6db6/attachment.html>