[Nouveau] [PATCH v2 0/7] Modernize vga_switcheroo by using device link for HDA
Daniel Vetter
daniel at ffwll.ch
Tue Mar 6 10:29:40 UTC 2018
On Sat, Mar 03, 2018 at 10:53:24AM +0100, Lukas Wunner wrote:
> Modernize vga_switcheroo by using a device link to enforce a runtime PM
> dependency from an HDA controller to the GPU it's integrated into, v2.
>
> Changes since v1:
>
> - Replace patch [1/7] to use pci_save_state() / pci_restore_state()
> for consistency between runtime PM code path of bound and unbound
> devices. (Rafael, Bjorn)
>
> - Patch [5/7]: Drop an unnecessary initialization. (Bjorn)
> Rephrase error message on failed link addition for clarity.
>
> Link to v1:
> https://www.spinics.net/lists/dri-devel/msg165889.html
>
> Testing on more machines would be greatly appreciated, particularly
> Nvidia Optimus or AMD PowerXpress.
>
> The series is based on 4.16-rc3. To test it on 4.15, you need to
> cherry-pick 7506dc798993 and 2fa6d6cdaf28. For your convenience
> I've pushed a 4.15-based branch to:
> https://github.com/l1k/linux/commits/switcheroo_devlink_v2
>
> Minimal test procedure:
>
> - Note well: Recent Optimus require that a Mini-DP or HDMI cable is
> plugged in on boot for the HDA device to be present.
>
> - Check that HDA, GPU and root port autosuspend when not in use:
> cat /sys/bus/pci/devices/0000:01:00.1/power/runtime_status # HDA
> cat /sys/bus/pci/devices/0000:01:00.0/power/runtime_status # GPU
> cat /sys/bus/pci/devices/0000:00:01.0/power/runtime_status # Root Port
>
> - Check that all three autoresume when accessing the HDA:
> hdajacksensetest -c 1
>
> - Unbind the HDA controller:
> echo 0000:01:00.1 > /sys/bus/pci/drivers/snd_hda_intel/unbind
> Wait for GPU to power off, then rebind the HDA controller:
> echo 0000:01:00.1 > /sys/bus/pci/drivers/snd_hda_intel/bind
> Check dmesg for errors, try accessing HDA with hdajacksensetest.
>
> - If your laptop uses the root port's _PR3 to cut power to the GPU:
> Unbind the GPU:
> echo 0000:01:00.0 > /sys/bus/pci/drivers/{nouveau,amdgpu,radeon}/unbind
> Allow runtime PM on the GPU:
> echo auto > /sys/bus/pci/devices/0000:01:00.0/power/control
> Wait for GPU to power off, then rebind it:
> echo 0000:01:00.0 > /sys/bus/pci/drivers/{nouveau,amdgpu,radeon}/bind
> Check dmesg for errors. If you see any then we may need to perform
> further actions in pci_pm_runtime_resume(), see patch [1/7].
This all looks really reasonable and like a good cleanup, but it's a bit
too much detail so I'll punt review to someone else with more clue.
-Daniel
>
> Thanks,
>
> Lukas
>
>
> Lukas Wunner (6):
> PCI: Make pci_wakeup_bus() & pci_bus_set_current_state() public
> vga_switcheroo: Update PCI current_state on power change
> vga_switcheroo: Deduplicate power state tracking
> vga_switcheroo: Use device link for HDA controller
> vga_switcheroo: Let HDA autosuspend on mux change
> drm/nouveau: Runtime suspend despite HDA being unbound
>
> Rafael J. Wysocki (1):
> PCI: Restore config space on runtime resume despite being unbound
>
> drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 2 -
> drivers/gpu/drm/nouveau/nouveau_drm.c | 46 ----------
> drivers/gpu/drm/nouveau/nouveau_drv.h | 1 -
> drivers/gpu/drm/radeon/radeon_drv.c | 2 -
> drivers/gpu/vga/vga_switcheroo.c | 152 ++++++++------------------------
> drivers/pci/pci-driver.c | 17 ++--
> drivers/pci/pci.c | 8 +-
> drivers/pci/quirks.c | 39 ++++++++
> include/linux/pci.h | 2 +
> include/linux/pci_ids.h | 1 +
> include/linux/vga_switcheroo.h | 6 --
> include/sound/hdaudio.h | 3 -
> sound/pci/hda/hda_intel.c | 36 +++++---
> sound/pci/hda/hda_intel.h | 3 -
> 14 files changed, 117 insertions(+), 201 deletions(-)
>
> --
> 2.15.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the Nouveau
mailing list