[Nouveau] Strange monitor behavior on forced DVI-D output
wolle321 at freenet.de
wolle321 at freenet.de
Fri Sep 7 20:11:16 UTC 2018
Hello ,
I'm new here but I hope I can describe my problem exactly.
I'm trying to get my DVI-Monitor to work with nouveau. The monitor is
automatically reported as not connected. LVDS is detected. Forcing it
on Xorg.conf didn't work, KMS does:
video=DVI-D-1:1920x1200e video=LVDS-1:d
X started with 1024x768, but could switch by xrandr to 1920x1200.
The viewed picture now is 1920x1200 , but the Monitor runs on 960x1200,
so that it looks very pixelated. (But there is no panning)
Tried to add another (cvt calculated) modeline (1920x1200_60.00) with
xrandr, but didnt help:
Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 8192 x 8192
LVDS-1 disconnected (normal left inverted right x axis y axis)
DVI-D-1 connected 1920x1200+0+0 (normal left inverted right x axis y
axis) 0mm x 0mm
1920x1200 60.00
1024x768 60.00
800x600 60.32 56.25
848x480 60.00
640x480 59.94
1920x1200_60.00 59.88*
dmesg:
...
[ 1.526099] fb: switching to nouveaufb from VESA VGA
[ 1.526125] Console: switching to colour dummy device 80x25
[ 1.526265] scsi host0: ahci
[ 1.526284] nouveau 0000:01:00.0: NVIDIA G92 (092f00a2)
[ 1.531073] scsi host1: ahci
[ 1.535016] scsi host2: ahci
[ 1.541021] scsi host3: ahci
[ 1.548031] scsi host4: ahci
[ 1.553014] scsi host5: ahci
[ 1.553064] ata1: SATA max UDMA/133 abar m2048 at 0xdb325000 port 0xdb325100 irq 29
[ 1.553067] ata2: SATA max UDMA/133 abar m2048 at 0xdb325000 port 0xdb325180 irq 29
[ 1.553068] ata3: DUMMY
[ 1.553070] ata4: DUMMY
[ 1.553073] ata5: SATA max UDMA/133 abar m2048 at 0xdb325000 port 0xdb325300 irq 29
[ 1.553076] ata6: SATA max UDMA/133 abar m2048 at 0xdb325000 port 0xdb325380 irq 29
[ 1.553513] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.590043] firewire_ohci 0000:86:06.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 1.678230] nouveau 0000:01:00.0: bios: version 62.92.6e.00.10
[ 1.678547] nouveau 0000:01:00.0: mxm: BIOS version 2.0
[ 1.680769] nouveau 0000:01:00.0: mxm: unmatched output device 0103010201010100
[ 1.701487] nouveau 0000:01:00.0: fb: 1024 MiB GDDR3
[ 1.711344] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:24:81:62:88:f7
[ 1.711351] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.711374] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1052FF-0FF
[ 1.712279] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.775146] [TTM] Zone kernel: Available graphics memory: 4066038 kiB
[ 1.775148] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.775150] [TTM] Initializing pool allocator
[ 1.775159] [TTM] Initializing DMA pool allocator
[ 1.775171] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[ 1.775173] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 1.775177] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 1.775179] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 1.775182] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000323 00010034
[ 1.775185] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011312 00020030
[ 1.775187] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022312 00020020
[ 1.775190] nouveau 0000:01:00.0: DRM: DCB outp 05: 02034300 00000028
[ 1.775192] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000040
[ 1.775194] nouveau 0000:01:00.0: DRM: DCB conn 01: 00001131
[ 1.775196] nouveau 0000:01:00.0: DRM: DCB conn 02: 00002231
[ 1.775198] nouveau 0000:01:00.0: DRM: DCB conn 03: 00110346
[ 1.775200] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000400
[ 1.775202] nouveau 0000:01:00.0: DRM: DCB conn 05: 00000510
[ 1.775203] nouveau 0000:01:00.0: DRM: DCB conn 06: 00000511
[ 1.775205] nouveau 0000:01:00.0: DRM: DCB conn 07: 00000513
[ 1.775207] nouveau 0000:01:00.0: DRM: DCB conn 08: 00002631
[ 1.775209] nouveau 0000:01:00.0: DRM: DCB conn 09: 00001731
[ 1.775211] nouveau 0000:01:00.0: DRM: DCB conn 10: 00002831
[ 1.775213] nouveau 0000:01:00.0: DRM: DCB conn 11: 00110946
[ 1.775215] nouveau 0000:01:00.0: DRM: DCB conn 12: 00000a00
[ 1.775217] nouveau 0000:01:00.0: DRM: DCB conn 13: 00000b10
[ 1.775219] nouveau 0000:01:00.0: DRM: DCB conn 14: 00000b11
[ 1.775221] nouveau 0000:01:00.0: DRM: DCB conn 15: 00000b13
[ 1.776874] [drm] forcing LVDS-1 connector off
[ 1.776924] [drm] forcing DVI-D-1 connector on
[ 1.777030] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.777031] [drm] Driver supports precise vblank timestamp query.
[ 1.779020] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
[ 1.791526] nouveau 0000:01:00.0: DRM: allocated 1920x1200 fb: 0x70000, bo (ptrval)
[ 1.792143] fbcon: nouveaufb (fb0) is primary device
[ 1.792399] Console: switching to colour frame buffer device 240x75
[ 1.792449] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 1.794020] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 1.797047] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
...
[ 37.435414] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv84_xuc00f failed with error -2
[ 37.435418] nouveau 0000:01:00.0: vp: unable to load firmware nouveau/nv84_xuc00f
[ 37.435420] nouveau 0000:01:00.0: vp: init failed, -2
Xorg.0.log:
...
[ 7.646] (==) Matched nouveau as autoconfigured driver 0
[ 7.646] (==) Matched nouveau as autoconfigured driver 1
[ 7.646] (==) Matched modesetting as autoconfigured driver 2
[ 7.646] (==) Matched fbdev as autoconfigured driver 3
[ 7.646] (==) Matched vesa as autoconfigured driver 4
[ 7.646] (==) Assigned the driver to the xf86ConfigLayout
[ 7.646] (II) LoadModule: "nouveau"
[ 7.648] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 7.649] (II) Module nouveau: vendor="X.Org Foundation"
[ 7.649] compiled for 1.19.3, module version = 1.0.15
[ 7.649] Module class: X.Org Video Driver
[ 7.649] ABI class: X.Org Video Driver, version 23.0
[ 7.649] (II) LoadModule: "modesetting"
[ 7.650] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 7.650] (II) Module modesetting: vendor="X.Org Foundation"
[ 7.650] compiled for 1.19.6, module version = 1.19.6
[ 7.650] Module class: X.Org Video Driver
[ 7.650] ABI class: X.Org Video Driver, version 23.0
[ 7.650] (II) LoadModule: "fbdev"
[ 7.650] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 7.650] (II) Module fbdev: vendor="X.Org Foundation"
[ 7.650] compiled for 1.19.3, module version = 0.4.4
[ 7.650] Module class: X.Org Video Driver
[ 7.650] ABI class: X.Org Video Driver, version 23.0
[ 7.650] (II) LoadModule: "vesa"
[ 7.650] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 7.650] (II) Module vesa: vendor="X.Org Foundation"
[ 7.650] compiled for 1.19.3, module version = 2.3.4
[ 7.650] Module class: X.Org Video Driver
[ 7.650] ABI class: X.Org Video Driver, version 23.0
[ 7.650] (II) NOUVEAU driver Date: Fri Apr 21 14:41:17 2017 -0400
[ 7.650] (II) NOUVEAU driver for NVIDIA chipset families :
[ 7.650] RIVA TNT (NV04)
[ 7.650] RIVA TNT2 (NV05)
[ 7.650] GeForce 256 (NV10)
[ 7.650] GeForce 2 (NV11, NV15)
[ 7.650] GeForce 4MX (NV17, NV18)
[ 7.650] GeForce 3 (NV20)
[ 7.650] GeForce 4Ti (NV25, NV28)
[ 7.650] GeForce FX (NV3x)
[ 7.650] GeForce 6 (NV4x)
[ 7.650] GeForce 7 (G7x)
[ 7.650] GeForce 8 (G8x)
[ 7.650] GeForce GTX 200 (NVA0)
[ 7.650] GeForce GTX 400 (NVC0)
[ 7.650] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 7.651] (II) FBDEV: driver for framebuffer: fbdev
[ 7.651] (II) VESA: driver for VESA chipsets: vesa
[ 7.670] (II) [drm] nouveau interface version: 1.3.1
[ 7.670] (WW) Falling back to old probe method for modesetting
[ 7.670] (WW) Falling back to old probe method for fbdev
[ 7.670] (II) Loading sub module "fbdevhw"
[ 7.670] (II) LoadModule: "fbdevhw"
[ 7.670] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 7.670] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 7.670] compiled for 1.19.6, module version = 0.0.2
[ 7.670] ABI class: X.Org Video Driver, version 23.0
[ 7.670] (WW) Falling back to old probe method for vesa
[ 7.670] (II) Loading sub module "dri2"
[ 7.670] (II) LoadModule: "dri2"
[ 7.670] (II) Module "dri2" already built-in
[ 7.670] (--) NOUVEAU(0): Chipset: "NVIDIA NV92"
[ 7.670] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.670] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 7.670] (==) NOUVEAU(0): RGB weight 888
[ 7.670] (==) NOUVEAU(0): Default visual is TrueColor
[ 7.670] (==) NOUVEAU(0): Using HW cursor
[ 7.670] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[ 7.670] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 7.670] (==) NOUVEAU(0): Page flipping enabled
[ 7.670] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 7.670] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 7.670] (II) NOUVEAU(0): Initializing outputs ...
[ 7.670] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[ 7.670] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[ 7.672] (II) NOUVEAU(0): Output DVI-D-2 has no monitor section
[ 7.690] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 7.690] (II) NOUVEAU(0): 4 crtcs needed for screen.
[ 7.693] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 7.693] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 7.693] (II) NOUVEAU(0): EDID for output LVDS-1
[ 7.693] (II) NOUVEAU(0): EDID for output DVI-D-1
[ 7.693] (II) NOUVEAU(0): Printing probed modes for output DVI-D-1
[ 7.693] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 193.15 1920 2048 2256 2592 1200 1201 1204 1242 -hsync +vsync (74.5 kHz)
[ 7.693] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.693] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.693] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.693] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 7.693] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.699] (II) NOUVEAU(0): EDID for output DVI-D-2
[ 7.720] (II) NOUVEAU(0): EDID for output VGA-1
[ 7.720] (II) NOUVEAU(0): Output LVDS-1 disconnected
[ 7.720] (II) NOUVEAU(0): Output DVI-D-1 connected
[ 7.720] (II) NOUVEAU(0): Output DVI-D-2 disconnected
[ 7.720] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 7.720] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 7.720] (II) NOUVEAU(0): Output DVI-D-1 using initial mode 1024x768 +0+0
[ 7.720] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 7.720] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 7.720] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 7.720] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.720] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 7.720] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.720] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 7.720] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.720] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 7.720] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 7.720] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 7.720] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.720] (**) NOUVEAU(0): Mode "1920x1200": 193.2 MHz (scaled from 0.0 MHz), 74.5 kHz, 60.0 Hz
[ 7.720] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 193.15 1920 2048 2256 2592 1200 1201 1204 1242 -hsync +vsync (74.5 kHz)
[ 7.720] (==) NOUVEAU(0): DPI set to (96, 96)
[ 7.720] (II) Loading sub module "fb"
[ 7.720] (II) LoadModule: "fb"
[ 7.720] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.723] (II) Module fb: vendor="X.Org Foundation"
[ 7.723] compiled for 1.19.6, module version = 1.0.0
[ 7.723] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.723] (II) Loading sub module "shadowfb"
[ 7.723] (II) LoadModule: "shadowfb"
[ 7.723] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 7.723] (II) Module shadowfb: vendor="X.Org Foundation"
[ 7.723] compiled for 1.19.6, module version = 1.0.0
[ 7.723] ABI class: X.Org ANSI C Emulation, version 0.4
...
[ 7.723] (--) Depth 24 pixmap format is 32 bpp
[ 7.728] (II) NOUVEAU(0): Channel setup complete.
[ 7.730] (II) NOUVEAU(0): Hardware support for Present enabled
[ 7.730] (II) NOUVEAU(0): [DRI2] Setup complete
[ 7.730] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 7.730] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 7.730] (II) Loading sub module "exa"
[ 7.730] (II) LoadModule: "exa"
[ 7.730] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 7.730] (II) Module exa: vendor="X.Org Foundation"
[ 7.730] compiled for 1.19.6, module version = 2.6.0
[ 7.730] ABI class: X.Org Video Driver, version 23.0
[ 7.730] (II) EXA(0): Driver allocated offscreen pixmaps
[ 7.730] (II) EXA(0): Driver registered support for the following operations:
[ 7.730] (II) Solid
[ 7.730] (II) Copy
[ 7.730] (II) Composite (RENDER acceleration)
[ 7.730] (II) UploadToScreen
[ 7.730] (II) DownloadFromScreen
[ 7.730] (==) NOUVEAU(0): Backing store enabled
[ 7.730] (==) NOUVEAU(0): Silken mouse enabled
[ 7.730] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 7.730] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 7.730] (==) NOUVEAU(0): DPMS enabled
[ 7.730] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
...
[ 7.831] (II) AIGLX: Loaded and initialized nouveau
[ 7.831] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7.834] (II) NOUVEAU(0): NVEnterVT is called.
[ 7.880] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
[ 7.880] resize called 1024 768
Could you tell me, how to get the monitor running with 1920x1200, not 960x1200(what ist the half x of 1920)?
Nb.:propietary nvidi-adriver v340 works with LVDS and DVI-D-1, (but chrashes after a while)
Thank you a lot, Wolfgang
More information about the Nouveau
mailing list