[Nouveau] [PATCH v3] PCI: Reprogram bridge prefetch registers on resume

[Peter Wu]

On Thu, Sep 13, 2018 at 08:52:29AM +0200, Rafael J. Wysocki wrote:
> On Thu, Sep 13, 2018 at 5:37 AM Daniel Drake <drake at endlessm.com> wrote:
> >
> > On 38+ Intel-based Asus products, the nvidia GPU becomes unusable
> > after S3 suspend/resume. The affected products include multiple
> > generations of nvidia GPUs and Intel SoCs. After resume, nouveau logs
> > many errors such as:
> >
> >     fifo: fault 00 [READ] at 0000005555555000 engine 00 [GR] client 04
> >           [HUB/FE] reason 4a [] on channel -1 [007fa91000 unknown]
> >     DRM: failed to idle channel 0 [DRM]
> >
> > Similarly, the nvidia proprietary driver also fails after resume
> > (black screen, 100% CPU usage in Xorg process). We shipped a sample
> > to Nvidia for diagnosis, and their response indicated that it's a
> > problem with the parent PCI bridge (on the Intel SoC), not the GPU.
> >
> > Runtime suspend/resume works fine, only S3 suspend is affected.
> >
> > We found a workaround: on resume, rewrite the Intel PCI bridge
> > 'Prefetchable Base Upper 32 Bits' register (PCI_PREF_BASE_UPPER32). In
> > the cases that I checked, this register has value 0 and we just have to
> > rewrite that value.
> >
> > Linux already saves and restores PCI config space during suspend/resume,
> > but this register was being skipped because upon resume, it already
> > has value 0 (the correct, pre-suspend value).
> >
> > Intel appear to have previously acknowledged this behaviour and the
> > requirement to rewrite this register.
> > https://bugzilla.kernel.org/show_bug.cgi?id=116851#c23
> >
> > Based on that, rewrite the prefetch register values even when that
> > appears unnecessary.
> >
> > We have confirmed this solution on all the affected models we have
> > in-hands (X542UQ, UX533FD, X530UN, V272UN).
> >
> > Additionally, this solves an issue where r8169 MSI-X interrupts were
> > broken after S3 suspend/resume on Asus X441UAR. This issue was recently
> > worked around in commit 7bb05b85bc2d ("r8169: don't use MSI-X on
> > RTL8106e"). It also fixes the same issue on RTL6186evl/8111evl on an
> > Aimfor-tech laptop that we had not yet patched. I suspect it will also
> > fix the issue that was worked around in commit 7c53a722459c ("r8169:
> > don't use MSI-X on RTL8168g").
> >
> > Thomas Martitz reports that this change also solves an issue where
> > the AMD Radeon Polaris 10 GPU on the HP Zbook 14u G5 is unresponsive
> > after S3 suspend/resume.
> >
> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=201069
> > Signed-off-by: Daniel Drake <drake at endlessm.com>
> 
> Still
> 
> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>

Reviewed-By: Peter Wu <peter at lekensteyn.nl>

> > ---
> >  drivers/pci/pci.c | 25 +++++++++++++++++--------
> >  1 file changed, 17 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > index 29ff9619b5fa..5d58220b6997 100644
> > --- a/drivers/pci/pci.c
> > +++ b/drivers/pci/pci.c
> > @@ -1289,12 +1289,12 @@ int pci_save_state(struct pci_dev *dev)
> >  EXPORT_SYMBOL(pci_save_state);
> >
> >  static void pci_restore_config_dword(struct pci_dev *pdev, int offset,
> > -                                    u32 saved_val, int retry)
> > +                                    u32 saved_val, int retry, bool force)
> >  {
> >         u32 val;
> >
> >         pci_read_config_dword(pdev, offset, &val);
> > -       if (val == saved_val)
> > +       if (!force && val == saved_val)
> >                 return;
> >
> >         for (;;) {
> > @@ -1313,25 +1313,34 @@ static void pci_restore_config_dword(struct pci_dev *pdev, int offset,
> >  }
> >
> >  static void pci_restore_config_space_range(struct pci_dev *pdev,
> > -                                          int start, int end, int retry)
> > +                                          int start, int end, int retry,
> > +                                          bool force)
> >  {
> >         int index;
> >
> >         for (index = end; index >= start; index--)
> >                 pci_restore_config_dword(pdev, 4 * index,
> >                                          pdev->saved_config_space[index],
> > -                                        retry);
> > +                                        retry, force);
> >  }
> >
> >  static void pci_restore_config_space(struct pci_dev *pdev)
> >  {
> >         if (pdev->hdr_type == PCI_HEADER_TYPE_NORMAL) {
> > -               pci_restore_config_space_range(pdev, 10, 15, 0);
> > +               pci_restore_config_space_range(pdev, 10, 15, 0, false);
> >                 /* Restore BARs before the command register. */
> > -               pci_restore_config_space_range(pdev, 4, 9, 10);
> > -               pci_restore_config_space_range(pdev, 0, 3, 0);
> > +               pci_restore_config_space_range(pdev, 4, 9, 10, false);
> > +               pci_restore_config_space_range(pdev, 0, 3, 0, false);
> > +       } else if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
> > +               pci_restore_config_space_range(pdev, 12, 15, 0, false);
> > +               /* Force rewriting of prefetch registers to avoid
> > +                * S3 resume issues on Intel PCI bridges that occur when
> > +                * these registers are not explicitly written.
> > +                */
> > +               pci_restore_config_space_range(pdev, 9, 11, 0, true);
> > +               pci_restore_config_space_range(pdev, 0, 8, 0, false);
> >         } else {
> > -               pci_restore_config_space_range(pdev, 0, 15, 0);
> > +               pci_restore_config_space_range(pdev, 0, 15, 0, false);
> >         }
> >  }
> >
> > --
> > 2.17.1
> >