[Nouveau] [PATCH v2 03/16] drm/dp_mst: Restart last_connected_port_and_mstb() if topology ref fails
Wentland, Harry
Harry.Wentland at amd.com
Tue Jan 8 19:16:10 UTC 2019
On 2018-12-19 7:19 p.m., Lyude Paul wrote:
> While this isn't a complete fix, this will improve the reliability of
> drm_dp_get_last_connected_port_and_mstb() pretty significantly during
> hotplug events, since there's a chance that the in-memory topology tree
> may not be fully updated when drm_dp_get_last_connected_port_and_mstb()
> is called and thus might end up causing our search to fail on an mstb
> whose topology refcount has reached 0, but has not yet been removed from
> it's parent.
>
> Ideally, we should further fix this problem by ensuring that we deal
> with the potential for racing with a hotplug event, which would look
> like this:
>
> * drm_dp_payload_send_msg() retrieves the last living relative of mstb
> with drm_dp_get_last_connected_port_and_mstb()
> * drm_dp_payload_send_msg() starts building payload message
> At the same time, mstb gets unplugged from the topology and is no
> longer the actual last living relative of the original mstb
> * drm_dp_payload_send_msg() tries sending the payload message, hub times
> out
> * Hub timed out, we give up and run away-resulting in the payload being
> leaked
>
> This could be fixed by restarting the
> drm_dp_get_last_connected_port_and_mstb() search whenever we get a
> timeout, sending the payload to the new mstb, then repeating until
> either the entire topology is removed from the system or
> drm_dp_get_last_connected_port_and_mstb() fails. But since the above
> race condition is not terribly likely, we'll address that in a later
> patch series once we've improved the recovery handling for VCPI
> allocations in the rest of the DP MST helpers.
>
> Signed-off-by: Lyude Paul <lyude at redhat.com>
> Cc: Daniel Vetter <daniel at ffwll.ch>
> Cc: David Airlie <airlied at redhat.com>
> Cc: Jerry Zuo <Jerry.Zuo at amd.com>
> Cc: Harry Wentland <harry.wentland at amd.com>
> Cc: Juston Li <juston.li at intel.com>
Reviewed-by: Harry Wentland <harry.wentland at amd.com>
Harry
> ---
> drivers/gpu/drm/drm_dp_mst_topology.c | 55 +++++++++++++++++++++------
> 1 file changed, 44 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
> index b380ada09e90..356a95aba2d8 100644
> --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> @@ -2043,25 +2043,50 @@ static struct drm_dp_mst_port *drm_dp_get_last_connected_port_to_mstb(struct drm
> return drm_dp_get_last_connected_port_to_mstb(mstb->port_parent->parent);
> }
>
> -static struct drm_dp_mst_branch *drm_dp_get_last_connected_port_and_mstb(struct drm_dp_mst_topology_mgr *mgr,
> - struct drm_dp_mst_branch *mstb,
> - int *port_num)
> +/**
> + * drm_dp_get_last_connected_port_and_mstb() - Find the last living relatives
> + * in a topology of a given branch device
> + * @mgr: The topology manager to use
> + * @mstb: The disconnected branch device
> + * @port_num: Where to store the number of the last connected port
> + *
> + * Searches upwards in the topology starting from @mstb to try to find the
> + * closest available parent of @mstb that's still connected to the rest of the
> + * topology. This can be used in order to perform operations like releasing
> + * payloads, where the branch device which owned the payload may no longer be
> + * around and thus would require that the payload on the last living relative
> + * be freed instead.
> + *
> + * Returns:
> + * The last connected &drm_dp_mst_branch in the topology that was a parent of
> + * @mstb, if there is one.
> + */
> +static struct drm_dp_mst_branch *
> +drm_dp_get_last_connected_port_and_mstb(struct drm_dp_mst_topology_mgr *mgr,
> + struct drm_dp_mst_branch *mstb,
> + int *port_num)
> {
> struct drm_dp_mst_branch *rmstb = NULL;
> struct drm_dp_mst_port *found_port;
> +
> mutex_lock(&mgr->lock);
> - if (mgr->mst_primary) {
> + if (!mgr->mst_primary)
> + goto out;
> +
> + do {
> found_port = drm_dp_get_last_connected_port_to_mstb(mstb);
> + if (!found_port)
> + break;
>
> - if (found_port) {
> + if (drm_dp_mst_topology_try_get_mstb(found_port->parent)) {
> rmstb = found_port->parent;
> - if (drm_dp_mst_topology_try_get_mstb(rmstb)) {
> - *port_num = found_port->port_num;
> - } else {
> - rmstb = NULL;
> - }
> + *port_num = found_port->port_num;
> + } else {
> + /* Search again, starting from this parent */
> + mstb = found_port->parent;
> }
> - }
> + } while (!rmstb);
> +out:
> mutex_unlock(&mgr->lock);
> return rmstb;
> }
> @@ -2110,6 +2135,14 @@ static int drm_dp_payload_send_msg(struct drm_dp_mst_topology_mgr *mgr,
>
> drm_dp_queue_down_tx(mgr, txmsg);
>
> + /*
> + * FIXME: there is a small chance that between getting the last
> + * connected mstb and sending the payload message, the last connected
> + * mstb could also be removed from the topology. In the future, this
> + * needs to be fixed by restarting the
> + * drm_dp_get_last_connected_port_and_mstb() search in the event of a
> + * timeout if the topology is still connected to the system.
> + */
> ret = drm_dp_mst_wait_tx_reply(mstb, txmsg);
> if (ret > 0) {
> if (txmsg->reply.reply_type == 1) {
>
More information about the Nouveau
mailing list