[Nouveau] [Bug 111853] New: nouveau kernel module won't load (not available) on Sony laptop with NVIDIA G86M [GeForce 8400M GT] ID: 10de:0426
bugzilla-daemon at freedesktop.org
bugzilla-daemon at freedesktop.org
Sun Sep 29 14:14:35 UTC 2019
https://bugs.freedesktop.org/show_bug.cgi?id=111853
Bug ID: 111853
Summary: nouveau kernel module won't load (not available) on
Sony laptop with NVIDIA G86M [GeForce 8400M GT] ID:
10de:0426
Product: xorg
Version: unspecified
Hardware: x86-64 (AMD64)
OS: Linux (All)
Status: NEW
Severity: major
Priority: not set
Component: Driver/nouveau
Assignee: nouveau at lists.freedesktop.org
Reporter: mrmazda at earthlink.net
QA Contact: xorg-team at lists.x.org
Created attachment 145577
--> https://bugs.freedesktop.org/attachment.cgi?id=145577&action=edit
dmesg using vanilla 5.2.14 and acpi=off on openSUSE Tumbleweed
Original summary:
nouveau won't load (not available) on Sony laptop with NVIDIA G86M [GeForce
8400M GT] ID: 10de:0426
This is mostly copied from https://bugzilla.kernel.org/show_bug.cgi?id=204851
This errant behavior is similarly exhibited by openSUSE Tumbleweed, 15.0, 13.1
and 12.2; Linuxmint 19.0 live installation media; Knoppix 8.2 and 8.6 live
media; antiX 17.4. Using vanilla kernel 5.2.14 on Tumbleweed doesn't help.
Actual behavior:
1-nouveau kernel module doesn't load
2-ttys limited to 1024x768 mode
3-X runs only with VESA or FBDEV drivers and limited to 1024x768 mode
4-/dev/dri/card0 is absent
5-hwinfo reports HDTV display supports maximum VESA 1024x768 mode
6-GeForce 8400M gfx reported by lspci is not found by Xorg
7-[drm] Failed to open DRM device for pci:0000:01:00.0: -19
8-hwinfo improperly detects display
9-laptop locks up (requires poweroff reset) unless cmdline includes acpi=off
10-/sys/kernel/debug/dri/ is empty
Expected behavior:
1-ttys use display's native 1920x1080 mode
2-X uses modesetting DDX or nouveau DDX and native 1920x1080 mode
# inxi -GxxSMaz
System: Host: vaio Kernel: 5.2.11-1-default x86_64 bits: 64 compiler: gcc v:
9.2.1
parameters: root=/dev/sda9 ipv6.disable=1 net.ifnames=0 noresume
mitigations=auto consoleblank=0
drm.debug=0x1e log_buf_len=1M acpi=off vga=791 video=1280x720 at 60
video=1024x768 at 60 video=1440x900 at 60 3 acpi=off
Console: tty 3 dm: N/A Distro: openSUSE Tumbleweed 20190907
Machine: Type: Laptop System: Sony product: VGN-AR730E v: C3LR1E11 serial:
<filter> Chassis: type: 10 serial: N/A
Mobo: Sony model: VAIO serial: N/A BIOS: Phoenix v: R2090J8 date:
02/26/2008
Graphics: Device-1: NVIDIA G86M [GeForce 8400M GT] vendor: Sony driver: N/A
bus ID: 01:00.0 chip ID: 10de:0426
Display: server: X.org 1.20.5 driver: nouveau,vesa unloaded:
fbdev,modesetting alternate: nv,nvidia tty: 128x48
Message: Advanced graphics data unavailable in console for root.
# lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation G86M [GeForce 8400M GT]
(rev a1)
# lspci -vv -d 10de:0426
01:00.0 VGA compatible controller: NVIDIA Corporation G86M [GeForce 8400M GT]
(rev a1) (prog-if 00 [VGA controller])
Subsystem: Sony Corporation Device 9016
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at cc000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 2000 [size=128]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns,
L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
SlotPowerLimit 75.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit
Latency L0s <512ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x16 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Kernel modules: nouveau
# dmesg | grep veau
# journalctl -b | grep veau
# lsmod | grep veau
# lsmod | grep video
uvcvideo 118784 0
videobuf2_vmalloc 20480 1 uvcvideo
videobuf2_memops 20480 1 videobuf2_vmalloc
video 53248 0
videobuf2_v4l2 28672 1 uvcvideo
videobuf2_common 57344 2 videobuf2_v4l2,uvcvideo
videodev 233472 3 videobuf2_v4l2,uvcvideo,videobuf2_common
media 57344 4
videodev,videobuf2_v4l2,uvcvideo,videobuf2_common
usbcore 303104 5 ehci_pci,usbhid,uvcvideo,ehci_hcd,uhci_hcd
# modprobe nouveau
modprobe: ERROR: could not insert 'nouveau': No such device
# hwinfo --monitor
31: None 00.0: 10000 Monitor
[Created at fb.71]
Unique ID: rdCR.EY_qmtb9YY0
Hardware Class: monitor
Model: "Generic Monitor"
Vendor: "Generic"
Device: "Monitor"
Resolution: 1024x768 at 76Hz
Year of Manufacture: 0
Week of Manufacture: 0
Driver Info #0:
Max. Resolution: 1024x768
Vert. Sync Range: 50-90 Hz
Hor. Sync Range: 31-61 kHz
Config Status: cfg=new, avail=yes, need=no, active=unknown
# hwinfo --gfxcard
16: PCI 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.386]
Unique ID: VCu0.3ZIBFiHqnhE
Parent ID: vSkL.__4Fox8chd3
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "nVidia GeForce 8400M GT"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0426 "GeForce 8400M GT"
SubVendor: pci 0x104d "Sony Corporation"
SubDevice: pci 0x9016
Revision: 0xa1
Memory Range: 0xce000000-0xceffffff (rw,non-prefetchable)
Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
Memory Range: 0xcc000000-0xcdffffff (rw,non-prefetchable)
I/O Ports: 0x2000-0x2fff (rw)
Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
IRQ: 5 (no events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v000010DEd00000426sv0000104Dsd00009016bc03sc00i00"
Driver Info #0:
XFree86 v4 Server Module: nv
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #12 (PCI bridge)
Primary display adapter: #16
# egrep 'dri|ailed|veau' /var/log/Xorg.0.log | grep -v 't driver'
[ 2155.322] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI
ID's supported by the drivers
[ 2155.322] (==) Matched nvidia as autoconfigured driver 0
[ 2155.322] (==) Matched nouveau as autoconfigured driver 1
[ 2155.322] (==) Matched nv as autoconfigured driver 2
[ 2155.322] (==) Matched modesetting as autoconfigured driver 3
[ 2155.322] (==) Matched fbdev as autoconfigured driver 4
[ 2155.322] (==) Matched vesa as autoconfigured driver 5
[ 2155.322] (==) Assigned the driver to the xf86ConfigLayout
[ 2155.322] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 2155.322] (II) LoadModule: "nouveau"
[ 2155.323] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 2155.323] (II) Module nouveau: vendor="X.Org Foundation"
[ 2155.323] (EE) Failed to load module "nv" (module does not exist, 0)
[ 2155.323] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 2155.323] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 2155.324] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 2155.324] (II) NOUVEAU driver
[ 2155.324] (II) NOUVEAU driver for NVIDIA chipset families :
[ 2155.324] (II) FBDEV: driver for framebuffer: fbdev
[ 2155.324] (II) VESA: driver for VESA chipsets: vesa
[ 2155.535] (EE) [drm] Failed to open DRM device for pci:0000:01:00.0: -19
[ 2155.536] (EE) open /dev/dri/card0: No such file or directory
[ 2155.536] (EE) open /dev/dri/card0: No such file or directory
[ 2156.135] (II) VESA(0): VESA VBE DDC read failed
[ 2156.135] (II) VESA(0): VESA VBE PanelID read failed
--
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/nouveau/attachments/20190929/b44798d9/attachment.html>
More information about the Nouveau
mailing list