[Nouveau] nouveau broken on Riva TNT2 in 5.9.0-rc8: GPU not supported on big-endian
Ondrej Zary
linux at zary.sk
Sat Oct 10 08:49:37 UTC 2020
On Saturday 10 October 2020 00:23:38 Ilia Mirkin wrote:
> On Fri, Oct 9, 2020 at 5:54 PM Karol Herbst <kherbst at redhat.com> wrote:
> >
> > On Fri, Oct 9, 2020 at 11:35 PM Ondrej Zary <linux at zary.sk> wrote:
> > >
> > > Hello,
> > > I'm testing 5.9.0-rc8 and found that Riva TNT2 stopped working:
> > > [ 0.000000] Linux version 5.9.0-rc8+ (zary at gsql) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #326 SMP Fri Oct 9 22:31:40 CEST 2020
> > > ...
> > > [ 14.771464] nouveau 0000:01:00.0: GPU not supported on big-endian
> > > [ 14.771782] nouveau: probe of 0000:01:00.0 failed with error -38
> > >
> > > big-endian? WTF? The machine is x86.
> > >
> >
> > mhh, we reworked the endianess checks a bit and apparently that broke
> > something... I will give it some thoughts, but could you be so kind
> > and create an mmiotrace under 5.9 with nouveau? You won't need to
> > start X or anything while doing it. Just enable the trace and modprobe
> > nouveau and collect the trace.
>
> Looks like nvkm_device_endianness unconditionally reads out 0x4. I
> don't think that reg is there pre-NV11. At least NV4, NV5, NV10 and
> maybe NV15 (which is logically pre-NV11) don't support big-endian
> mode. Not sure about NV1A, which was the IGP of the series and IIRC
> logically pre-NV11 as well (but clearly could only be used with x86
> chips, since it was part of the motherboard).
Yes, you're right. Forcing nvkm_device_endianness to return true allows
5.9.0-rc8 to work:
[ 0.000000] Linux version 5.9.0-rc8+ (zary at gsql) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #326 SMP Fri Oct 9 22:31:40 CEST 2020
...
[ 12.311258] nouveau 0000:01:00.0: bios: DCB table not found
[ 12.311583] nouveau 0000:01:00.0: bios: DCB table not found
[ 12.311834] nouveau 0000:01:00.0: bios: DCB table not found
[ 12.311847] nouveau 0000:01:00.0: bios: DCB table not found
[ 12.311989] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 12.312017] agpgart-intel 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 12.312031] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 12.312066] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 12.312162] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 12.312182] agpgart-intel 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 12.312195] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 12.312230] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 12.312247] nouveau 0000:01:00.0: tmr: unknown input clock freq
[ 12.318341] nouveau 0000:01:00.0: fb: 32 MiB SDRAM
[ 12.333376] [TTM] Zone kernel: Available graphics memory: 385048 KiB
[ 12.333392] [TTM] Initializing pool allocator
[ 12.333434] nouveau 0000:01:00.0: DRM: VRAM: 31 MiB
[ 12.333443] nouveau 0000:01:00.0: DRM: GART: 128 MiB
[ 12.333453] nouveau 0000:01:00.0: DRM: BMP version 5.6
[ 12.333460] nouveau 0000:01:00.0: DRM: No DCB data found in VBIOS
[ 12.335355] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[ 12.335443] nouveau 0000:01:00.0: bios: DCB table not found
[ 12.336033] nouveau 0000:01:00.0: DRM: Saving VGA fonts
[ 12.376420] nouveau 0000:01:00.0: DRM: No DCB data found in VBIOS
[ 12.410397] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x4000, bo b68d2ac4
[ 12.441217] fbcon: nouveaudrmfb (fb0) is primary device
[ 12.591964] Console: switching to colour frame buffer device 160x64
[ 12.593876] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[ 12.594944] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
BTW. 5.8 kernel (that appeared today in Debian packports) is broken the same way.
> Aha, it's documented in rnndb:
>
> https://github.com/envytools/envytools/blob/master/rnndb/bus/pmc.xml
> <reg32 offset="0x004" name="ENDIAN" variants="NV1A-"/>
>
> -ilia
>
--
Ondrej Zary
More information about the Nouveau
mailing list