[Nouveau] nouveau regression post v5.8, still present in v5.10
Karol Herbst
kherbst at redhat.com
Thu Jan 21 09:11:08 UTC 2021
fyi, there is a patch which solves a maybe related issue on your GPU,
mind giving it a try before we dig further?
https://gitlab.freedesktop.org/drm/nouveau/-/issues/14#note_767791
On Thu, Jan 21, 2021 at 3:33 AM Jamie Heilman
<jamie at audible.transient.net> wrote:
>
> Karol Herbst wrote:
> > On Wed, Jan 6, 2021 at 4:25 AM Jamie Heilman
> > <jamie at audible.transient.net> wrote:
> > >
> > > Jamie Heilman wrote:
> > > > Jamie Heilman wrote:
> > > > > Karol Herbst wrote:
> > > > > > do you think you'd be able to do a kernel bisect in order to pinpoint
> > > > > > the actual commit causing it? Thanks
> > > > >
> > > > > No. I can't reproduce it reliably. I if I could, bisection wouldn't
> > > > > be a problem but as I can't and as it can take weeks for the problem
> > > > > to occur there's essentially no chance. I know it regressed roughly
> > > > > in 5.8-rc1 only because that's what I was running when the first event
> > > > > occured.
> > > >
> > > > er, 5.9.0-rc1 rather
> > >
> > > Actually ... I've found a way to reproduce this in hours intead of
> > > weeks, so I think I may be able to bisect it after all, it's something
> > > of a brute force approach and its probably doing horrible things to
> > > the backlight in my poor old monitor, but just running this:
> > >
> > > #!/bin/sh
> > > sleep 5
> > > while ! dmesg | tail | grep -q nouveau
> > > do
> > > xset dpms force off
> > > sleep 65
> > > xdotool mousemove 1024 1024 mousemove restore
> > > sleep 10
> > > done
> > >
> > > Does manage to trip the issue sooner than it would otherwise happen
> > > with natural usage. Given that this is my primary workstation and I
> > > sort of need it functional during waking hours, it'll take me a bit,
> > > but I'll update folks when I have the error more dialed in.
> > >
> >
> > huh interesting. Kind of feels like a random thing still. But I think
> > in general you'd spend way too much time on this if you can't
> > reproduce within seconds/minutes and then it might not point out the
> > actual issue, because randomly the issue didn't appear and stuff.
> >
> > maybe you can tune it to have shorter pauses or something? I'd really
> > try to bring down the time per cycle.
>
> Well I'm confident enough, at this point, to say this bisects to
> 0a96099691c8 ("drm/nouveau/kms/nv50-: implement proper push buffer control logic")
>
> Now... I wish I could say the bisection was straightforward and
> simple, but it wasn't thanks to still not having a reproducer really
> dialed in. The above script doesn't work unless I've got some normal
> usage around it. It certainly triggers the issue sooner than it
> otherwise would, but by itself it isn't enough. I modified it
> somewhat in the hopes of capturing the rough idea of how many
> itterations it would take to trigger the problem by using:
>
> #!/bin/sh
> I=0
> trap 'echo;echo $I' 0
> trap 'exit' INT
> sleep 5
> while ! dmesg | tail | grep -q nouveau
> do
> I=$(($I + 1))
> xset dpms force off
> sleep 32
> xdotool mousemove 1 12 mousemove restore
> sleep 28
> done
>
> but ultimately that didn't really pan out the way I'd hoped. I don't
> think the itterations have all that much to do with the condition in
> the end. I wanted to try applying ca386aa7155a
> ("drm/nouveau/kms/nv50-gp1xx: add WAR for EVO push buffer HW bug") on
> top of the first bad commit becuase I sort of felt like when I was
> running -rc versions that things got a bit less chaotic after that
> commit landed, but it was just a gut feeling and I wanted to see if I
> could support it with metrics---but no, I can't really get consistent
> metrics even without that commit so I gave up, and decided to report
> what I've got so far.
>
>
>
> > > I'm using git bisect start -- drivers/gpu/drm include/drm include/video
> > > in an effort to make this go a bit quicker, let me know if you think
> > > that's a bad idea or I should add other paths.
> > >
> > > > > > On Sun, Dec 27, 2020 at 8:16 PM Jamie Heilman
> > > > > > <jamie at audible.transient.net> wrote:
> > > > > > >
> > > > > > > Something between v5.8 and v5.9 has resulted in periodically losing video.
> > > > > > > Unfortunately, I can't reliably reproduce it, it seems to happen every
> > > > > > > once in a long while---I can go weeks without an occurance, but it
> > > > > > > always seems to happen after my workstation has been idle long enough
> > > > > > > to screen blank and put the monitor to sleep. I'm using a single
> > > > > > > display (Dell 2405FPW) connected via DVI, running X (Xorg 1.20.x from
> > > > > > > Debian sid). I don't really do anything fancy, xterms, a browser or
> > > > > > > two, play the occasional video, but like I said, I can't reliably
> > > > > > > reproduce this. I've had it happen about 11 times since August.
> > > > > > >
> > > > > > > lspci -vv output is:
> > > > > > >
> > > > > > > 01:00.0 VGA compatible controller: NVIDIA Corporation G86 [Quadro NVS 290] (rev a1) (prog-if 00 [VGA controller])
> > > > > > > Subsystem: NVIDIA Corporation G86 [Quadro NVS 290]
> > > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> > > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > > > > > > Latency: 0, Cache Line Size: 64 bytes
> > > > > > > Interrupt: pin A routed to IRQ 28
> > > > > > > Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
> > > > > > > Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> > > > > > > Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
> > > > > > > Region 5: I/O ports at dc80 [size=128]
> > > > > > > Expansion ROM at 000c0000 [disabled] [size=128K]
> > > > > > > Capabilities: [60] Power Management version 2
> > > > > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> > > > > > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > > > > > > Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
> > > > > > > Address: 00000000fee01004 Data: 4023
> > > > > > > Capabilities: [78] Express (v1) Endpoint, MSI 00
> > > > > > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
> > > > > > > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 25.000W
> > > > > > > DevCtl: CorrErr- NonFatalErr+ FatalErr+ UnsupReq-
> > > > > > > RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
> > > > > > > MaxPayload 128 bytes, MaxReadReq 512 bytes
> > > > > > > DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
> > > > > > > LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
> > > > > > > ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
> > > > > > > LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
> > > > > > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> > > > > > > LnkSta: Speed 2.5GT/s (ok), Width x16 (ok)
> > > > > > > TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> > > > > > > Capabilities: [100 v1] Virtual Channel
> > > > > > > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> > > > > > > Arb: Fixed- WRR32- WRR64- WRR128-
> > > > > > > Ctrl: ArbSelect=Fixed
> > > > > > > Status: InProgress-
> > > > > > > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> > > > > > > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> > > > > > > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
> > > > > > > Status: NegoPending- InProgress-
> > > > > > > Capabilities: [128 v1] Power Budgeting <?>
> > > > > > > Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
> > > > > > > Kernel driver in use: nouveau
> > > > > > >
> > > > > > > The last time this happened, this is what got logged:
> > > > > > >
> > > > > > > nouveau 0000:01:00.0: disp: ERROR 5 [INVALID_STATE] 06 [] chid 1 mthd 0080 data 00000001
> > > > > > > nouveau 0000:01:00.0: disp: Base 1:
> > > > > > > nouveau 0000:01:00.0: disp: 0084: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 0088: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 008c: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 0090: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 0094: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 00a0: 00000060 -> 00000070
> > > > > > > nouveau 0000:01:00.0: disp: 00a4: 00000000 -> f0000000
> > > > > > > nouveau 0000:01:00.0: disp: 00c0: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 00c4: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 00c8: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 00cc: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 00e0: 40000000
> > > > > > > nouveau 0000:01:00.0: disp: 00e4: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 00e8: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 00ec: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 00fc: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 0100: fffe0000
> > > > > > > nouveau 0000:01:00.0: disp: 0104: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 0110: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 0114: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: Base 1 - Image 0:
> > > > > > > nouveau 0000:01:00.0: disp: 0800: 00009500
> > > > > > > nouveau 0000:01:00.0: disp: 0804: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 0808: 04b00780
> > > > > > > nouveau 0000:01:00.0: disp: 080c: 00007804
> > > > > > > nouveau 0000:01:00.0: disp: 0810: 0000cf00
> > > > > > > nouveau 0000:01:00.0: disp: Base 1 - Image 1:
> > > > > > > nouveau 0000:01:00.0: disp: 0c00: 00009500
> > > > > > > nouveau 0000:01:00.0: disp: 0c04: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 0c08: 04b00780
> > > > > > > nouveau 0000:01:00.0: disp: 0c0c: 00007804
> > > > > > > nouveau 0000:01:00.0: disp: 0c10: 0000cf00
> > > > > > > nouveau 0000:01:00.0: disp: ERROR 5 [INVALID_STATE] 06 [] chid 1 mthd 0080 data 00000001
> > > > > > > nouveau 0000:01:00.0: disp: Base 1:
> > > > > > > nouveau 0000:01:00.0: disp: 0084: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 0088: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 008c: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 0090: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 0094: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 00a0: 00000060 -> 00000070
> > > > > > > nouveau 0000:01:00.0: disp: 00a4: 00000000 -> f0000000
> > > > > > > nouveau 0000:01:00.0: disp: 00c0: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 00c4: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 00c8: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 00cc: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 00e0: 40000000
> > > > > > > nouveau 0000:01:00.0: disp: 00e4: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 00e8: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 00ec: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 00fc: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 0100: fffe0000
> > > > > > > nouveau 0000:01:00.0: disp: 0104: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 0110: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 0114: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: Base 1 - Image 0:
> > > > > > > nouveau 0000:01:00.0: disp: 0800: 00009500
> > > > > > > nouveau 0000:01:00.0: disp: 0804: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 0808: 04b00780
> > > > > > > nouveau 0000:01:00.0: disp: 080c: 00007804
> > > > > > > nouveau 0000:01:00.0: disp: 0810: 0000cf00
> > > > > > > nouveau 0000:01:00.0: disp: Base 1 - Image 1:
> > > > > > > nouveau 0000:01:00.0: disp: 0c00: 00009500
> > > > > > > nouveau 0000:01:00.0: disp: 0c04: 00000000
> > > > > > > nouveau 0000:01:00.0: disp: 0c08: 04b00780
> > > > > > > nouveau 0000:01:00.0: disp: 0c0c: 00007804
> > > > > > > nouveau 0000:01:00.0: disp: 0c10: 0000cf00
> > > > > > > nouveau 0000:01:00.0: DRM: core notifier timeout
> > > > > > > nouveau 0000:01:00.0: DRM: base-0: timeout
> > > > > > >
> > > > > > > I've got logs of all of this, if they help I can collect them. The
> > > > > > > timeout message are consistent the error messages a little less so.
> > > > > > >
> > > > > > > If there's more debugging I can do when this happens, I'd love to know
> > > > > > > what it is.
> > > > > > >
> > > > > > > kernel config: http://audible.transient.net/~jamie/k/nouveau.config-5.10.0
> > > > > > > dmesg at boot: http://audible.transient.net/~jamie/k/nouveau.dmesg
> > > > > > >
> > > > > > > --
> > > > > > > Jamie Heilman http://audible.transient.net/~jamie/
> > > > > > > _______________________________________________
> > > > > > > Nouveau mailing list
> > > > > > > Nouveau at lists.freedesktop.org
> > > > > > > https://lists.freedesktop.org/mailman/listinfo/nouveau
> > > > > > >
> > > > > >
> > > > >
> > > > > --
> > > > > Jamie Heilman http://audible.transient.net/~jamie/
> > > >
> > > > --
> > > > Jamie Heilman http://audible.transient.net/~jamie/
> > >
> > > --
> > > Jamie Heilman http://audible.transient.net/~jamie/
> > >
> >
>
> --
> Jamie Heilman http://audible.transient.net/~jamie/
>
More information about the Nouveau
mailing list