[PATCH v3 03/13] drm/dp: Add argument for max luminance in drm_edp_backlight_init
Suraj Kandpal
suraj.kandpal at intel.com
Fri Jun 20 06:34:35 UTC 2025
Add new argument to drm_edp_backlight_init which gives the
max_luminance which will be needed to set the max values for
backlight.
--v2
-Use pass only max luminance instead of luminance_range_info struct
[Arun]
Signed-off-by: Suraj Kandpal <suraj.kandpal at intel.com>
---
drivers/gpu/drm/display/drm_dp_helper.c | 4 +++-
drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c | 6 ++++--
drivers/gpu/drm/nouveau/nouveau_backlight.c | 3 ++-
include/drm/display/drm_dp_helper.h | 1 +
4 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/display/drm_dp_helper.c b/drivers/gpu/drm/display/drm_dp_helper.c
index 2a662951f7a8..9df95776d1cb 100644
--- a/drivers/gpu/drm/display/drm_dp_helper.c
+++ b/drivers/gpu/drm/display/drm_dp_helper.c
@@ -4251,6 +4251,7 @@ drm_edp_backlight_probe_state(struct drm_dp_aux *aux, struct drm_edp_backlight_i
* interface.
* @aux: The DP aux device to use for probing
* @bl: The &drm_edp_backlight_info struct to fill out with information on the backlight
+ * @max_luminance: max luminance when need luminance is set as true
* @driver_pwm_freq_hz: Optional PWM frequency from the driver in hz
* @edp_dpcd: A cached copy of the eDP DPCD
* @current_level: Where to store the probed brightness level, if any
@@ -4267,6 +4268,7 @@ drm_edp_backlight_probe_state(struct drm_dp_aux *aux, struct drm_edp_backlight_i
*/
int
drm_edp_backlight_init(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl,
+ u32 max_luminance,
u16 driver_pwm_freq_hz, const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE],
u16 *current_level, u8 *current_mode, bool need_luminance)
{
@@ -4396,7 +4398,7 @@ int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux)
bl->aux = aux;
- ret = drm_edp_backlight_init(aux, &bl->info, 0, edp_dpcd,
+ ret = drm_edp_backlight_init(aux, &bl->info, 0, 0, edp_dpcd,
¤t_level, ¤t_mode, false);
if (ret < 0)
return ret;
diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
index dc6f6680774f..ab594bf028da 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
@@ -599,8 +599,10 @@ static int intel_dp_aux_vesa_setup_backlight(struct intel_connector *connector,
connector->base.base.id, connector->base.name);
} else {
ret = drm_edp_backlight_init(&intel_dp->aux, &panel->backlight.edp.vesa.info,
- panel->vbt.backlight.pwm_freq_hz, intel_dp->edp_dpcd,
- ¤t_level, ¤t_mode, false);
+ luminance_range->max_luminance,
+ panel->vbt.backlight.pwm_freq_hz,
+ intel_dp->edp_dpcd, ¤t_level, ¤t_mode,
+ false);
if (ret < 0)
return ret;
diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c b/drivers/gpu/drm/nouveau/nouveau_backlight.c
index 7d93266bf26a..d45619db02a2 100644
--- a/drivers/gpu/drm/nouveau/nouveau_backlight.c
+++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c
@@ -261,7 +261,8 @@ nv50_backlight_init(struct nouveau_backlight *bl,
NV_DEBUG(drm, "DPCD backlight controls supported on %s\n",
nv_conn->base.name);
- ret = drm_edp_backlight_init(&nv_conn->aux, &bl->edp_info, 0, edp_dpcd,
+ ret = drm_edp_backlight_init(&nv_conn->aux, &bl->edp_info,
+ 0, 0, edp_dpcd,
¤t_level, ¤t_mode, false);
if (ret < 0)
return ret;
diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h
index fcbf447206cf..91094a38594c 100644
--- a/include/drm/display/drm_dp_helper.h
+++ b/include/drm/display/drm_dp_helper.h
@@ -860,6 +860,7 @@ struct drm_edp_backlight_info {
int
drm_edp_backlight_init(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl,
+ u32 max_luminance,
u16 driver_pwm_freq_hz, const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE],
u16 *current_level, u8 *current_mode, bool need_luminance);
int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl,
--
2.34.1
More information about the Nouveau
mailing list