<html> <head> <base href="https://bugs.freedesktop.org/"> </head> <body> <div> <a class="bz_bug_link bz_status_NEW " title="NEW - H/W Acceleration sufficiently buggy on Debian to hard lock machine GeForce 7600 GO" href="https://bugs.freedesktop.org/show_bug.cgi?id=112070#c29">Comment # 29</a> on <a class="bz_bug_link bz_status_NEW " title="NEW - H/W Acceleration sufficiently buggy on Debian to hard lock machine GeForce 7600 GO" href="https://bugs.freedesktop.org/show_bug.cgi?id=112070">bug 112070</a> from <a class="email" href="mailto:dooby.dave@virgin.net" title="Doobz <dooby.dave@virgin.net>"> Doobz</a> <pre>So.. My laptop's interrupt issues disappear when booting with acpi=off. So did nouveau however. Have tried a few other boot parameters, including acpi_apic_instance=2 as suggested in dmesg, but no joy. Could these ACPI warnings be hinting at something? [ 20.414011] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 20.416862] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\PMIO) (20190703/utaddress-204) [ 20.416870] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 20.416873] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20190703/utaddress-204) [ 20.416878] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 20.416879] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20190703/utaddress-204) [ 20.416883] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 20.416884] lpc_ich: Resource conflict(s) found affecting gpio_ich</pre> </div> <hr> You are receiving this mail because: <ul> <li>You are the assignee for the bug.</li> </ul> </body> </html>