[Openchrome-devel] arandr rotate screen

[Eric Kudzin]

Ok so I installed Lubuntu 12.04 i386 and followed your compile instructions. 
Current setup: Wyse Vx0LE http://www.parkytowers.me.uk/thin/wyse/vx0/WyseV90LE.shtml , lspci shows: [S3 Unichrome Pro] (rev 01), HP LP2065 4:3 monitor, VGA mode (DVI-VGA adapter) 1600x1200 60hz. 

I installed ARandR and tried to rotate the screen. if I go 180' a dialog box comes up and says:XRandR failed:XRandR returned error code 1: xrandr: Configure crtc 0 failed
If I rotate 90' or 270' the display blanks out and the login box appears after a bit. I think it crashes X. 
dmesg shows:agpgart-via 0000:00:00:0: AGP V3 bridgeagpgart-via 0000:00:00:0: putting agp V3 device into 8x modepci 0000:01:00:0: putting agp V3 device into 8x mode
Let me know if I need to test this at different resolutions or using DVI.
Eric
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/openchrome-devel/attachments/20160219/e90f236c/attachment.html>