[Openchrome-devel] [Openchrome-users] 答复: 答复: 答复: Getting ready to release OpenChrome Version 0.3.4
PETRY, Roman, SHS-S IT-TS
Roman.Petry at shsservices.org
Thu Mar 24 10:49:27 UTC 2016
Hello Frank, Hello Kevin
my VGA and DVI Port is working with an really old Build.. I think.. we use 2 differnent Distributions.. Here the Logfile from 1. Distri:
Works with 1680x1050, and with 1920x1080 i see wrong colors ( i can post a screenshot if you want)
Xorg log:
[ 93.139] ABI class: X.Org XInput driver, version 21.0
[ 93.139] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, KM400/KN400,
K8M800/K8N800, PM800/PM880/CN400, VM800/P4M800Pro/VN800/CN700,
CX700/VX700, K8M890/K8N890, P4M890, P4M900/VN896/CN896, VX800/VX820,
VX855/VX875, VX900
[ 93.139] (++) using VT number 7
[ 93.155] (!!) VIA Technologies does not support this driver in any way.
[ 93.155] (!!) For support, please refer to http://www.openchrome.org/.
[ 93.155] (!!) (development build, compiled on Wed Oct 8 18:05:34 2014)
[ 93.155] (II) CHROME(0): VIAPreInit
[ 93.155] (II) CHROME(0): VIAGetRec
[ 93.155] (--) CHROME(0): Chipset: VM800/P4M800Pro/VN800/CN700
[ 93.160] (--) CHROME(0): Chipset revision: 0
[ 93.160] (II) [drm] KMS not enabled
[ 93.160] (II) CHROME(0): [drm] via interface version: 2.11.1
[ 93.160] (II) CHROME(0): DRI 1 api supported
[ 93.160] (II) Loading sub module "vgahw"
[ 93.160] (II) LoadModule: "vgahw"
[ 93.160] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 93.161] (II) Module vgahw: vendor="X.Org Foundation"
[ 93.161] compiled for 1.16.1, module version = 0.1.0
[ 93.161] ABI class: X.Org Video Driver, version 18.0
[ 93.161] (--) CHROME(0): Probed amount of VideoRAM = 32768 kB
[ 93.161] (II) CHROME(0): VIAMapMMIO
[ 93.161] (--) CHROME(0): mapping MMIO @ 0xfb000000 with size 0xd000
[ 93.161] (--) CHROME(0): mapping BitBlt MMIO @ 0xfb200000 with size 0x200000
[ 93.161] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 93.161] (II) CHROME(0): VIAMapFB
[ 93.161] (--) CHROME(0): mapping framebuffer @ 0xf4000000 with size 0x2000000
[ 93.162] (--) CHROME(0): Frame buffer start: 0xb4ed5000, free start: 0x0 end: 0x2000000
[ 93.162] (**) CHROME(0): Depth 24, (--) framebuffer bpp 32
[ 93.162] (==) CHROME(0): RGB weight 888
[ 93.162] (==) CHROME(0): Default visual is TrueColor
[ 93.162] (II) CHROME(0): VIASetupDefaultOptions - Setting up default chipset options.
[ 93.162] (**) CHROME(0): Option "AccelMethod" "EXA"
[ 93.162] (**) CHROME(0): Option "SWCursor" "on"
[ 93.162] (==) CHROME(0): Shadow framebuffer is disabled.
[ 93.162] (==) CHROME(0): Hardware acceleration is enabled.
[ 93.162] (**) CHROME(0): Using EXA acceleration architecture.
[ 93.162] (==) CHROME(0): EXA composite acceleration enabled.
[ 93.162] (==) CHROME(0): EXA scratch area size is 4096 kB.
[ 93.162] (**) CHROME(0): Using software cursors.
[ 93.162] (==) CHROME(0): GPU virtual command queue will be enabled.
[ 93.162] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
[ 93.162] (==) CHROME(0): AGP DMA will be enabled if DRI is enabled.
[ 93.162] (==) CHROME(0): AGP DMA will be used for 2D acceleration.
[ 93.162] (==) CHROME(0): PCI DMA will be used for XV image transfer if DRI is enabled.
[ 93.162] (==) CHROME(0): Will not enable VBE modes.
[ 93.162] (==) CHROME(0): VBE VGA register save & restore will not be used
if VBE modes are enabled.
[ 93.162] (==) CHROME(0): Xv Bandwidth check is enabled.
[ 93.162] (==) CHROME(0): Will not impose a limit on video RAM reserved for DRI.
[ 93.162] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
[ 93.162] (==) CHROME(0): TV dotCrawl is disabled.
[ 93.162] (==) CHROME(0): TV deflicker is set to 0.
[ 93.162] (==) CHROME(0): No default TV type is set.
[ 93.162] (==) CHROME(0): No default TV output signal type is set.
[ 93.162] (==) CHROME(0): No default TV output port is set.
[ 93.162] (==) CHROME(0): Will not print VGA registers.
[ 93.162] (==) CHROME(0): Will not scan I2C buses.
[ 93.162] (II) CHROME(0): ...Finished parsing config file options.
[ 93.162] (WW) CHROME(0): Manufacturer plainly copied main PCI IDs to subsystem/card IDs.
[ 93.162] (--) CHROME(0): Detected VIA VT3344 (VM800) - EPIA EN. Card-Ids (1106|3344)
[ 93.162] (II) CHROME(0): Detected MemClk 7
[ 93.162] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 7
[ 93.162] (II) CHROME(0): Detected TV standard: NTSC.
[ 93.162] (II) Loading sub module "i2c"
[ 93.162] (II) LoadModule: "i2c"
[ 93.162] (II) Module "i2c" already built-in
[ 93.162] (II) CHROME(0): ViaI2CInit
[ 93.163] (II) CHROME(0): ViaI2CBus1Init
[ 93.163] (II) CHROME(0): I2C bus "I2C bus 1" initialized.
[ 93.163] (II) CHROME(0): ViaI2cBus2Init
[ 93.163] (II) CHROME(0): I2C bus "I2C bus 2" initialized.
[ 93.163] (II) CHROME(0): ViaI2CBus3Init
[ 93.163] (II) CHROME(0): I2C bus "I2C bus 3" initialized.
[ 93.163] (II) Loading sub module "ddc"
[ 93.163] (II) LoadModule: "ddc"
[ 93.163] (II) Module "ddc" already built-in
[ 93.163] (II) CHROME(0): ViaOutputsDetect
[ 93.163] (==) CHROME(0): LVDS-0 : Digital output bus width is 12 bits.
[ 93.163] (==) CHROME(0): LVDS-0 : DVI Center is disabled.
[ 93.163] (==) CHROME(0): LVDS Panel will not be forced.
[ 93.163] (==) CHROME(0): Panel size is not selected from config file.
[ 93.163] (II) CHROME(0): Output VGA-1 using monitor section Monitor0
[ 93.172] (II) CHROME(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
[ 93.187] (--) CHROME(0): Test for CRT with VSYNC
[ 93.196] (II) CHROME(0): EDID for output VGA-1
[ 93.196] (II) CHROME(0): Output VGA-1 disconnected
[ 93.196] (WW) CHROME(0): No outputs definitely connected, trying again...
[ 93.196] (II) CHROME(0): Output VGA-1 disconnected
[ 93.196] (WW) CHROME(0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 93.196] (II) CHROME(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 93.196] (==) CHROME(0): DPI set to (96, 96)
[ 93.196] (II) Loading sub module "fb"
[ 93.196] (II) LoadModule: "fb"
[ 93.196] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 93.197] (II) Module fb: vendor="X.Org Foundation"
[ 93.197] compiled for 1.16.1, module version = 1.0.0
[ 93.197] ABI class: X.Org ANSI C Emulation, version 0.4
[ 93.197] (II) Loading sub module "exa"
[ 93.197] (II) LoadModule: "exa"
[ 93.197] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 93.198] (II) Module exa: vendor="X.Org Foundation"
[ 93.198] compiled for 1.16.1, module version = 2.6.0
[ 93.198] ABI class: X.Org Video Driver, version 18.0
[ 93.198] (--) Depth 24 pixmap format is 32 bpp
[ 93.198] (II) CHROME(0): VIAScreenInit
[ 93.198] (II) CHROME(0): Frame Buffer From (0,0) To (1024,8192)
[ 93.198] (II) CHROME(0): Using 7424 lines for offscreen memory.
[ 93.198] 3145728 bytes of Linear memory allocated at 300000, handle 159835224
[ 93.198] 262144 bytes of Linear memory allocated at 600000, handle 159835352
[ 93.198] 32 bytes of Linear memory allocated at 640000, handle 159835480
[ 93.198] 32 bytes of Linear memory allocated at 640080, handle 159835608
[ 93.198] (II) CHROME(0): - Visuals set up
[ 93.199] (II) CHROME(0): - B & W
[ 93.199] (**) CHROME(0): Option "MigrationHeuristic" "greedy"
[ 93.199] (II) EXA(0): Offscreen pixmap area of 30408704 bytes
[ 93.199] (II) EXA(0): Driver registered support for the following operations:
[ 93.199] (II) Solid
[ 93.199] (II) Copy
[ 93.199] (II) Composite (RENDER acceleration)
[ 93.199] (II) CHROME(0): [EXA] Enabled EXA acceleration.
[ 93.199] (==) CHROME(0): Backing store enabled
[ 93.199] (II) CHROME(0): - Backing store set up
[ 93.199] (II) CHROME(0): - SW cursor set up
[ 93.199] (II) CHROME(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 93.199] (II) CHROME(0): - Def Color map set up
[ 93.199] (II) CHROME(0): - Palette loaded
[ 93.199] (II) CHROME(0): - Color maps etc. set up
[ 93.208] (==) CHROME(0): DPMS enabled
[ 93.208] (II) CHROME(0): - DPMS set up
[ 93.208] (II) CHROME(0): VIAEnterVT
[ 93.208] (II) CHROME(0): VIASave
[ 93.208] (II) CHROME(0): Primary
[ 93.209] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
[ 93.209] (II) CHROME(0): Crtc...
[ 93.209] (II) CHROME(0): TVSave...
[ 93.209] (II) CHROME(0): VIASave
[ 93.209] (II) CHROME(0): Primary
[ 93.209] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
[ 93.209] (II) CHROME(0): Crtc...
[ 93.209] (II) CHROME(0): TVSave...
[ 93.209] (II) CHROME(0): ViaDisplayDisableCRT
[ 93.209] (II) CHROME(0): ViaDisplayDisableCRT
[ 93.209] DRM memory allocation failed -6
[ 93.209] 635904 bytes of Linear memory allocated at 641000, handle 159856104
[ 93.223] (II) CHROME(0): Benchmarking video copy. Less time is better.
[ 93.270] (--) CHROME(0): Timed libc YUV420 copy... 16731023. Throughput: 42.4 MiB/s.
[ 93.283] (--) CHROME(0): Timed kernel YUV420 copy... 2064180. Throughput: 344.0 MiB/s.
[ 93.295] (--) CHROME(0): Timed SSE YUV420 copy... 1160229. Throughput: 612.0 MiB/s.
[ 93.316] (--) CHROME(0): Timed MMX YUV420 copy... 1803323. Throughput: 393.8 MiB/s.
[ 93.316] (--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by CPU.
[ 93.328] (--) CHROME(0): Timed MMX2 YUV420 copy... 1232690. Throughput: 576.1 MiB/s.
[ 93.328] Freed 6557696 (pool 4)
[ 93.329] (--) CHROME(0): Using SSE YUV42X copy for video.
[ 93.329] (WW) CHROME(0): [XvMC] Cannot use XvMC without DRI!
[ 93.329] (II) CHROME(0): - Done
[ 93.329] (--) RandR disabled
[ 93.818] (II) Using input driver 'mouse' for 'Mouse0'
[ 93.818] (**) Option "CorePointer"
[ 93.818] (**) Mouse0: always reports core events
[ 93.818] (**) Option "Protocol" "auto"
[ 93.818] (**) Option "Device" "/dev/input/mice"
[ 93.818] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 93.818] (**) Mouse0: Protocol: "auto"
[ 93.818] (**) Mouse0: always reports core events
[ 93.819] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 93.819] (**) Option "ZAxisMapping" "4 5 6 7"
[ 93.819] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 93.819] (**) Mouse0: Buttons: 11
[ 93.819] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 6)
[ 93.819] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 93.819] (**) Mouse0: (accel) acceleration profile 0
[ 93.819] (**) Mouse0: (accel) acceleration factor: 2.000
[ 93.819] (**) Mouse0: (accel) acceleration threshold: 4
[ 93.819] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 94.111] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 94.111] (II) Using input driver 'evdev' for 'Touch0'
[ 94.111] (**) Touch0: always reports core events
[ 94.111] (**) evdev: Touch0: Device: "/dev/input/event1"
[ 94.112] (--) evdev: Touch0: Vendor 0x46d Product 0xc52b
[ 94.112] (--) evdev: Touch0: Found 1 mouse buttons
[ 94.112] (--) evdev: Touch0: Found scroll wheel(s)
[ 94.112] (--) evdev: Touch0: Found relative axes
[ 94.112] (II) evdev: Touch0: Forcing relative x/y axes to exist.
[ 94.112] (--) evdev: Touch0: Found absolute axes
[ 94.112] (II) evdev: Touch0: Forcing absolute x/y axes to exist.
[ 94.112] (--) evdev: Touch0: Found keys
[ 94.112] (II) evdev: Touch0: Configuring as mouse
[ 94.112] (II) evdev: Touch0: Configuring as keyboard
[ 94.112] (II) evdev: Touch0: Adding scrollwheel support
[ 94.112] (**) evdev: Touch0: YAxisMapping: buttons 4 and 5
[ 94.112] (**) evdev: Touch0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 94.112] (II) XINPUT: Adding extended input device "Touch0" (type: KEYBOARD, id 7)
[ 94.112] (**) Option "xkb_rules" "evdev"
[ 94.112] (**) Option "xkb_model" "pc104"
[ 94.112] (**) Option "xkb_layout" "us"
[ 94.370] (II) evdev: Touch0: initialized for relative axes.
[ 94.370] (WW) evdev: Touch0: ignoring absolute axes.
[ 94.371] (**) Touch0: (accel) keeping acceleration scheme 1
[ 94.371] (**) Touch0: (accel) acceleration profile 0
[ 94.371] (**) Touch0: (accel) acceleration factor: 2.000
[ 94.371] (**) Touch0: (accel) acceleration threshold: 4
[ 94.376] (II) Using input driver 'kbd' for 'Keyboard0'
[ 94.376] (**) Option "CoreKeyboard"
[ 94.376] (**) Keyboard0: always reports core events
[ 94.376] (**) Keyboard0: always reports core events
[ 94.376] (**) Option "Protocol" "standard"
[ 94.376] (**) Option "XkbRules" "thinbox"
[ 94.376] (**) Option "XkbModel" "pc105"
[ 94.376] (**) Option "XkbLayout" "de"
[ 94.376] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 8)
[ 94.868] (--) CHROME(0): Test for CRT with VSYNC
[ 94.986] (--) CHROME(0): Test for CRT with VSYNC
[ 95.108] (--) CHROME(0): Test for CRT with VSYNC
[ 95.363] (--) CHROME(0): Test for CRT with VSYNC
[ 95.529] (--) CHROME(0): Test for CRT with VSYNC
[ 95.571] (--) CHROME(0): Test for CRT with VSYNC
[ 95.676] (--) CHROME(0): Test for CRT with VSYNC
[ 95.847] (--) CHROME(0): Test for CRT with VSYNC
[ 95.856] (II) CHROME(0): ViaFirstCRTCModeValid
[ 95.856] (II) CHROME(0): ViaDisplayDisableCRT
[ 95.856] (II) CHROME(0): ViaModeFirstCRTC
[ 95.856] (II) CHROME(0): ViaFirstCRTCSetMode
[ 95.856] (II) CHROME(0): Setting up 1024x768
[ 95.856] (II) CHROME(0): ViaSetPrimaryFIFO
[ 95.856] (II) CHROME(0): ViaSetDotclock to 0x0b30ad
[ 95.856] (II) CHROME(0): ViaSetUseExternalClock
[ 95.856] (II) CHROME(0): ViaDisplayDisableSimultaneous
[ 95.856] (II) CHROME(0): ViaFirstCRTCSetStartingAddress
[ 95.856] (II) CHROME(0): ViaDisplayEnableCRT
[ 95.856] (II) CHROME(0): VIALoadRgbLut
[ 95.856] (II) CHROME(0): ViaDisplayEnableCRT
[ 95.930] (--) CHROME(0): Test for CRT with VSYNC
[ 107.285] (--) CHROME(0): Test for CRT with VSYNC
[ 107.813] (--) CHROME(0): Test for CRT with VSYNC
[ 687.141] (--) CHROME(0): Test for CRT with VSYNC
And now from the Thinstatation 5.1 Distribution: this one has now the garbage on the screen 8-)
[ 34.274] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, KM400/KN400,
K8M800/K8N800, PM800/PM880/CN400, VM800/P4M800Pro/VN800/CN700,
CX700/VX700, K8M890/K8N890, P4M890, P4M900/VN896/CN896, VX800/VX820,
VX855/VX875, VX900
[ 34.274] (II) VESA: driver for VESA chipsets: vesa
[ 34.274] (++) using VT number 5
[ 34.350] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
[ 34.350] (!!) VIA Technologies does not support this driver in any way.
[ 34.350] (!!) For support, please refer to http://www.openchrome.org/.
[ 34.350] (!!) (developement build, branch master at revision eee95bd)
[ 34.350] (WW) Falling back to old probe method for vesa
[ 34.351] (II) CHROME(0): VIAPreInit
[ 34.351] (II) CHROME(0): VIAGetRec
[ 34.351] (--) CHROME(0): Chipset: VM800/P4M800Pro/VN800/CN700
[ 34.351] (--) CHROME(0): Chipset revision: 0
[ 34.351] drmOpenDevice: node name is /dev/dri/card0
[ 34.429] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 34.429] drmOpenDevice: node name is /dev/dri/card0
[ 34.429] drmOpenDevice: open result is 9, (OK)
[ 34.429] drmOpenByBusid: drmOpenMinor returns 9
[ 34.430] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 34.430] (II) [drm] KMS not enabled
[ 34.430] (II) CHROME(0): [drm] via interface version: 2.11.1
[ 34.430] (II) CHROME(0): DRI 1 api supported
[ 34.430] (II) Loading sub module "vgahw"
[ 34.430] (II) LoadModule: "vgahw"
[ 34.430] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 34.431] (II) Module vgahw: vendor="X.Org Foundation"
[ 34.431] compiled for 1.11.4, module version = 0.1.0
[ 34.431] ABI class: X.Org Video Driver, version 11.0
[ 34.431] (--) CHROME(0): Probed amount of VideoRAM = 32768 kB
[ 34.431] (II) CHROME(0): VIAMapMMIO
[ 34.431] (--) CHROME(0): mapping MMIO @ 0xfb000000 with size 0xd000
[ 34.431] (--) CHROME(0): mapping BitBlt MMIO @ 0xfb200000 with size 0x200000
[ 34.432] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 34.432] (II) CHROME(0): VIAMapFB
[ 34.432] (--) CHROME(0): mapping framebuffer @ 0xf4000000 with size 0x2000000
[ 34.432] (--) CHROME(0): Frame buffer start: 0x74fb7000, free start: 0x0 end: 0x2000000
[ 34.432] (==) CHROME(0): Depth 24, (--) framebuffer bpp 32
[ 34.432] (==) CHROME(0): RGB weight 888
[ 34.432] (==) CHROME(0): Default visual is TrueColor
[ 34.432] (II) CHROME(0): VIASetupDefaultOptions - Setting up default chipset options.
[ 34.432] (==) CHROME(0): Shadow framebuffer is disabled.
[ 34.432] (==) CHROME(0): Hardware acceleration is enabled.
[ 34.432] (==) CHROME(0): Using EXA acceleration architecture.
[ 34.432] (==) CHROME(0): EXA composite acceleration disabled.
[ 34.432] (==) CHROME(0): EXA scratch area size is 4096 kB.
[ 34.432] (==) CHROME(0): Using hardware two-color cursors and software full-color cursors.
[ 34.432] (==) CHROME(0): GPU virtual command queue will be enabled.
[ 34.432] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
[ 34.432] (==) CHROME(0): AGP DMA will be enabled if DRI is enabled.
[ 34.432] (==) CHROME(0): AGP DMA will be used for 2D acceleration.
[ 34.432] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
[ 34.432] (==) CHROME(0): AGP DMA will be enabled if DRI is enabled.
[ 34.432] (==) CHROME(0): AGP DMA will be used for 2D acceleration.
[ 34.433] (==) CHROME(0): PCI DMA will be used for XV image transfer if DRI is enabled.
[ 34.433] (==) CHROME(0): Will not enable VBE modes.
[ 34.433] (==) CHROME(0): VBE VGA register save & restore will not be used
if VBE modes are enabled.
[ 34.433] (==) CHROME(0): Xv Bandwidth check is enabled.
[ 34.433] (==) CHROME(0): Will not impose a limit on video RAM reserved for DRI.
[ 34.433] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
[ 34.433] (==) CHROME(0): TV dotCrawl is disabled.
[ 34.433] (==) CHROME(0): TV deflicker is set to 0.
[ 34.433] (==) CHROME(0): No default TV type is set.
[ 34.433] (==) CHROME(0): No default TV output signal type is set.
[ 34.433] (==) CHROME(0): No default TV output port is set.
[ 34.433] (==) CHROME(0): Will not print VGA registers.
[ 34.433] (==) CHROME(0): Will not scan I2C buses.
[ 34.433] (II) CHROME(0): ...Finished parsing config file options.
[ 34.433] (WW) CHROME(0): Manufacturer plainly copied main PCI IDs to subsystem/card IDs.
[ 34.433] (--) CHROME(0): Detected VIA VT3344 (VM800) - EPIA EN. Card-Ids (1106|3344)
[ 34.433] (II) CHROME(0): Detected MemClk 7
[ 34.433] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 7
[ 34.433] (II) CHROME(0): Detected TV standard: NTSC.
[ 34.433] (II) Loading sub module "ramdac"
[ 34.433] (II) LoadModule: "ramdac"
[ 34.433] (II) Module "ramdac" already built-in
[ 34.433] (II) Loading sub module "i2c"
[ 34.433] (II) LoadModule: "i2c"
[ 34.433] (II) Module "i2c" already built-in
[ 34.433] (II) CHROME(0): ViaI2CInit
[ 34.433] (II) CHROME(0): ViaI2CBus1Init
[ 34.433] (II) CHROME(0): I2C bus "I2C bus 1" initialized.
[ 34.433] (II) CHROME(0): ViaI2cBus2Init
[ 34.433] (II) CHROME(0): I2C bus "I2C bus 2" initialized.
[ 34.433] (II) CHROME(0): ViaI2CBus3Init
[ 34.433] (II) CHROME(0): I2C bus "I2C bus 3" initialized.
[ 34.433] (II) Loading sub module "ddc"
[ 34.433] (II) LoadModule: "ddc"
[ 34.433] (II) Module "ddc" already built-in
[ 34.433] (II) CHROME(0): ViaOutputsDetect
[ 34.433] (==) CHROME(0): LVDS-0 : Digital output bus width is 12 bits.
[ 34.433] (==) CHROME(0): LVDS-0 : DVI Center is disabled.
[ 34.433] (==) CHROME(0): LVDS Panel will not be forced.
[ 34.433] (==) CHROME(0): Panel size is not selected from config file.
[ 34.433] (II) CHROME(0): Output VGA-1 has no monitor section
[ 34.435] (II) CHROME(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
[ 34.438] (II) CHROME(0): ViaDisplayDisableCRT
[ 34.438] (II) CHROME(0): EDID for output VGA-1
[ 34.438] (II) CHROME(0): Output VGA-1 disconnected
[ 34.438] (WW) CHROME(0): No outputs definitely connected, trying again...
[ 34.438] (II) CHROME(0): Output VGA-1 disconnected
[ 34.438] (WW) CHROME(0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 34.438] (II) CHROME(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 34.438] (==) CHROME(0): DPI set to (96, 96)
[ 34.438] (II) Loading sub module "fb"
[ 34.438] (II) LoadModule: "fb"
[ 34.439] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 34.440] (II) Module fb: vendor="X.Org Foundation"
[ 34.440] compiled for 1.11.4, module version = 1.0.0
[ 34.440] ABI class: X.Org ANSI C Emulation, version 0.4
[ 34.440] (II) Loading sub module "exa"
[ 34.440] (II) LoadModule: "exa"
[ 34.441] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 34.441] (II) Module exa: vendor="X.Org Foundation"
[ 34.441] compiled for 1.11.4, module version = 2.5.0
[ 34.441] ABI class: X.Org Video Driver, version 11.0
[ 34.441] (II) UnloadModule: "vesa"
[ 34.441] (II) Unloading vesa
[ 34.441] (--) Depth 24 pixmap format is 32 bpp
[ 34.442] (II) CHROME(0): VIAScreenInit
[ 34.442] drmOpenDevice: node name is /dev/dri/card0
[ 34.442] drmOpenDevice: open result is 9, (OK)
[ 34.442] drmOpenDevice: node name is /dev/dri/card0
[ 34.442] drmOpenDevice: open result is 9, (OK)
[ 34.442] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 34.442] drmOpenDevice: node name is /dev/dri/card0
[ 34.442] drmOpenDevice: open result is 9, (OK)
[ 34.442] drmOpenByBusid: drmOpenMinor returns 9
[ 34.442] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 34.443] (II) [drm] DRM interface version 1.4
[ 34.443] (II) [drm] DRM open master succeeded.
[ 34.443] (II) CHROME(0): [drm] Using the DRM lock SAREA also for drawables.
[ 34.443] (II) CHROME(0): [drm] framebuffer handle = 0xf4000000
[ 34.443] (II) CHROME(0): [drm] added 1 reserved context for kernel
[ 34.443] (II) CHROME(0): X context handle = 0x1
[ 34.444] (II) CHROME(0): [drm] installed DRM signal handler
[ 34.444] (II) CHROME(0): [dri] visual configs initialized.
[ 34.444] (II) CHROME(0): [drm] register handle = 0xfb000000
[ 34.444] (II) CHROME(0): [drm] framebuffer handle = 0xf4000000
[ 34.444] (II) CHROME(0): [drm] mmio Registers = 0xfb000000
[ 34.444] (II) CHROME(0): [dri] mmio mapped.
[ 34.444] (II) CHROME(0): DRI1 ScreenInit commplete
[ 34.444] (II) CHROME(0): [drm] Detected AGP vendor 0x1106, device 0x0314
[ 34.444] (II) CHROME(0): [drm] Found AGP v3 compatible device. Trying AGP 8X mode.
[ 34.444] (II) CHROME(0): [drm] Trying to enable AGP fast writes.
[ 34.520] (II) CHROME(0): [drm] drmAgpEnabled succeeded
[ 34.520] (II) CHROME(0): [drm] agpAddr = 0xe8000000
[ 34.520] (II) CHROME(0): [drm] agpSize = 0x01e00000
[ 34.520] (II) CHROME(0): [drm] agp physical addr = 0x73183000
[ 34.520] (II) CHROME(0): [dri] Using AGP.
[ 34.520] (II) CHROME(0): [drm] Using 32768 KB for DRM memory heap.
[ 34.520] (II) CHROME(0): [dri] Frame buffer initialized.
[ 34.520] (II) CHROME(0): [dri] Kernel data initialized.
[ 34.520] 3145728 bytes of DRI memory allocated at 0, handle 1
[ 34.520] 262144 bytes of DRI memory allocated at 300000, handle 2
[ 34.521] 32 bytes of DRI memory allocated at 340000, handle 3
[ 34.521] 32 bytes of DRI memory allocated at 340020, handle 4
[ 34.521] (II) CHROME(0): - Visuals set up
[ 34.521] (II) CHROME(0): - B & W
[ 34.521] (II) CHROME(0): [EXA] Disabling EXA accelerated composite.
[ 34.521] (**) CHROME(0): Option "MigrationHeuristic" "greedy"
[ 34.521] (II) EXA(0): Offscreen pixmap area of 30408704 bytes
[ 34.521] (II) EXA(0): Driver registered support for the following operations:
[ 34.521] (II) Solid
[ 34.521] (II) Copy
[ 34.521] (II) DownloadFromScreen
[ 34.521] (II) CHROME(0): [EXA] Enabled EXA acceleration.
[ 34.521] (==) CHROME(0): Backing store disabled
[ 34.521] (II) CHROME(0): - Backing store set up
[ 34.521] (II) CHROME(0): - SW cursor set up
[ 34.521] (II) CHROME(0): HWCursor ARGB enabled
[ 34.522] 16384 bytes of DRI memory allocated at 340040, handle 5
[ 34.522] 16384 bytes of DRI memory allocated at 344040, handle 6
[ 34.522] (II) CHROME(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 34.522] (II) CHROME(0): - Def Color map set up
[ 34.522] (II) CHROME(0): - Palette loaded
[ 34.522] (II) CHROME(0): - Color maps etc. set up
[ 34.522] (==) CHROME(0): DPMS enabled
[ 34.522] (II) CHROME(0): - DPMS set up
[ 34.522] (II) CHROME(0): VIAEnterVT
[ 34.522] (II) CHROME(0): VIASave
[ 34.522] (II) CHROME(0): Primary
[ 34.523] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
[ 34.523] (II) CHROME(0): Crtc...
[ 34.523] (II) CHROME(0): TVSave...
[ 34.523] (II) CHROME(0): VIASave
[ 34.523] (II) CHROME(0): Primary
[ 34.524] (II) CHROME(0): Primary Adapter! saving VGA_SR_ALL !!
[ 34.524] (II) CHROME(0): Crtc...
[ 34.524] (II) CHROME(0): TVSave...
[ 34.524] (II) CHROME(0): ViaDisplayDisableCRT
[ 34.524] (II) CHROME(0): ViaDisplayDisableCRT
[ 34.524] (WW) CHROME(0): [drm] The DRM heap and pixmap cache memory may be too
[drm] small for optimal performance. Please increase
[drm] the frame buffer memory area in the BIOS.
[ 34.524] 8388608 bytes of DRI memory allocated at 348040, handle 7
[ 34.524] (II) CHROME(0): [DRI] installation complete
[ 34.524] (II) CHROME(0): [drm] IRQ handler installed, using IRQ 16.
[ 34.524] (II) CHROME(0): [drm] Initialized AGP ring-buffer, size 0x200000 at AGP offset 0x1e00000.
[ 34.524] (II) CHROME(0): direct rendering enabled
[ 34.524] 4194304 bytes of DRI memory allocated at 0, handle 8
[ 34.524] (II) CHROME(0): Allocated 4096 kiB of AGP memory for EXA scratch area.
[ 34.525] (II) CHROME(0): [Xv] Using PCI DMA for Xv image transfer.
[ 34.525] 635904 bytes of DRI memory allocated at b48040, handle 9
[ 34.526] (II) CHROME(0): Benchmarking video copy. Less time is better.
[ 34.533] (--) CHROME(0): Timed libc YUV420 copy... 2168281. Throughput: 327.5 MiB/s.
[ 34.539] (--) CHROME(0): Timed kernel YUV420 copy... 2117391. Throughput: 335.4 MiB/s.
[ 34.543] (--) CHROME(0): Timed SSE YUV420 copy... 1241982. Throughput: 571.8 MiB/s.
[ 34.548] (--) CHROME(0): Timed MMX YUV420 copy... 1839143. Throughput: 386.1 MiB/s.
[ 34.549] (--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by CPU.
[ 34.553] (--) CHROME(0): Timed MMX2 YUV420 copy... 1311444. Throughput: 541.5 MiB/s.
[ 34.553] Freed 11829312 (pool 4)
[ 34.553] (--) CHROME(0): Using SSE YUV42X copy for video.
[ 34.554] (II) CHROME(0): [XvMC] Registering chromeXvMC.
[ 34.554] (II) CHROME(0): [XvMC] Initialized XvMC extension.
[ 34.554] (II) CHROME(0): - Done
[ 34.962] (II) CHROME(0): ViaDisplayDisableCRT
[ 35.178] (II) CHROME(0): ViaDisplayDisableCRT
[ 36.928] (II) CHROME(0): ViaDisplayDisableCRT
[ 38.321] (II) CHROME(0): ViaDisplayDisableCRT
[ 43.421] (II) CHROME(0): ViaDisplayDisableCRT
[ 81.153] (II) CHROME(0): ViaDisplayDisableCRT
-----Ursprüngliche Nachricht-----
Von: 黄然 [mailto:huangran at iscas.ac.cn]
Gesendet: Donnerstag, 24. März 2016 10:51
An: PETRY, Roman, SHS-S IT-TS; noloader at gmail.com; Kevin Brace
Cc: openchrome-users at lists.freedesktop.org; openchrome-devel at lists.freedesktop.org
Betreff: 答复: [Openchrome-users] 答复: 答复: 答复: [Openchrome-devel] Getting ready to release OpenChrome Version 0.3.4
CC Kevin.
Hi Roman,
As I replied to Kevin on bug 91966, right now I used the latest UMS(xf86-video-openchrome) code, my Wyse V90LE board has output issue both on VGA and DVI ports.
At least, your VGA port is working now. So which commit id you are using now for UMS driver? I can give a try on that firstly.
By the way, as you have seen, right now Kevin is working on the rewrite of display and output control code for UMS driver. Let me check with Kevin to see if he need me do something here. I do have some other engineers who can help on some bugs with my guide.
Thanks,
Frank
> -----邮件原件-----
> 发件人: PETRY, Roman, SHS-S IT-TS [mailto:Roman.Petry at shsservices.org]
> 发送时间: 2016年3月24日 17:43
> 收件人: 黄然; noloader at gmail.com
> 抄送: openchrome-users at lists.freedesktop.org;
> openchrome-devel at lists.freedesktop.org
> 主题: AW: [Openchrome-users] 答复: 答复: 答复: [Openchrome-devel] Getting
> ready to release OpenChrome Version 0.3.4
>
> Hi, yes we have issues with DVI Connected Displays with "high" resolutions..
> I can use VGA with 1920x1080 without an issue, if i use the dvi
> connector i see garbage on the screen.. it works till 1680x1050 if i
> remember correctly via the DVI port..
> If you wan´t i can test it again and write down my findings..
> Bye
> roman
>
> -----Ursprüngliche Nachricht-----
> Von: Openchrome-users
> [mailto:openchrome-users-bounces at lists.freedesktop.org] Im Auftrag von ??
> Gesendet: Donnerstag, 24. März 2016 10:38
> An: PETRY, Roman, SHS-S IT-TS; noloader at gmail.com
> Cc: openchrome-users at lists.freedesktop.org;
> openchrome-devel at lists.freedesktop.org
> Betreff: [Openchrome-users] 答复: 答复: 答复: [Openchrome-devel] Getting
> ready to release OpenChrome Version 0.3.4
>
> Hi Roman,
>
> Okay...
> It is very similar as my Wyse V90LE platform(P4M800Pro). And
> P4M800Pro and CN700 are all belonging to Unichrome Pro GPU chipset.
> Do you met any issues on this platform with current OpenChrome code?
>
> Thanks,
> Frank
>
>
> > -----邮件原件-----
> > 发件人: PETRY, Roman, SHS-S IT-TS [mailto:Roman.Petry at shsservices.org]
> > 发送时间: 2016年3月24日 16:05
> > 收件人: 黄然; noloader at gmail.com
> > 抄送: openchrome-users at lists.freedesktop.org;
> > openchrome-devel at lists.freedesktop.org
> > 主题: AW: [Openchrome-users] 答复: 答复: [Openchrome-devel] Getting
> ready to
> > release OpenChrome Version 0.3.4
> >
> > Hi,
> > i have some TK 3770 and TK3772 Termtek ThinCLients here..
> >
> > Termtek TK3770 with DVI and VGA Via Eden CN700 and VT8237R+ Chipset
> see.
> > http://www.novatronix.com.co/pdf/TERMTEK/TK-3770S.pdf
> > Termtek TK3772 with DVI and VGA - with VIA 1.2 GHz GHz and CN700
> > chipset I use thinstation 5.x as my distribution.. if you need help. Just ask.
> > Bye
> > roman
> >
> >
> > -----Ursprüngliche Nachricht-----
> > Von: Openchrome-users
> > [mailto:openchrome-users-bounces at lists.freedesktop.org] Im Auftrag
> von ??
> > Gesendet: Donnerstag, 24. März 2016 08:26
> > An: noloader at gmail.com
> > Cc: openchrome-users at lists.freedesktop.org;
> > openchrome-devel at lists.freedesktop.org
> > Betreff: [Openchrome-users] 答复: 答复: [Openchrome-devel] Getting
> ready
> > to release OpenChrome Version 0.3.4
> >
> > Hi Jeff,
> >
> > Appreciate your help here.
> > Right now I have purchased 3 thin clients(HP T510(VX900), Wyse
> > C90LE(VX855/875) and Wyse V90LE(P4M800PRO/CN700)). The price is
> > similar as your recommendation one(P4M900 which is Chrome9). I think
> > those are enough for my current work! By the way, I have another
> > VX900 developer board which has HDMI+VGA ports on it.
> > So right now I have no plan to buy more only when it is needed.
> >
> > Thanks,
> > Frank
> >
> >
> >
> > > -----邮件原件-----
> > > 发件人: Jeffrey Walton [mailto:noloader at gmail.com]
> > > 发送时间: 2016年3月24日 10:11
> > > 收件人: 黄然
> > > 抄送: openchrome-users at lists.freedesktop.org;
> > > openchrome-devel at lists.freedesktop.org
> > > 主题: Re: [Openchrome-users] 答复: [Openchrome-devel] Getting ready
> to
> > > release OpenChrome Version 0.3.4
> > >
> > > On Mon, Feb 22, 2016 at 4:27 AM, 黄然 <huangran at iscas.ac.cn> wrote:
> > > > Hi Kevin,
> > > >
> > > > Now that KMS is the trend and being adopted by main
> > > > graphics
> > > cards vendor(Intel, AMD/AIT), so I think KMS driver is needed to
> > > be tested as you said here.
> > > > I will get a VX900 chipset based board and try/test
> > > > OpenChrome
> > > KMS driver then based on my experience for 5 years' working on AMD
> > > open source RADEON KMS driver.
> > > > Simultaneously, I prefer to get/buy more old VIA boards
> > > > as you
> > > have done.
> > > > Keep contact.
> > >
> > > Here's an inexpensive one I use for testing OpenSSL and Crypto++
> > > under VIA's C7-D processor with Padlock extensions. It also has a
> > > [formerly problematic]
> > > P4M900 chipset. Its available for $120 USD:
> > > http://www.amazon.com/dp/B01AXR2KBQ.
> > >
> > > Jeff
> >
> >
> > _______________________________________________
> > Openchrome-users mailing list
> > Openchrome-users at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/openchrome-users
> > Main page: http://www.openchrome.org
> > Wiki: http://www.openchrome.org/trac/wiki/TOC
>
>
> _______________________________________________
> Openchrome-users mailing list
> Openchrome-users at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/openchrome-users
> Main page: http://www.openchrome.org
> Wiki: http://www.openchrome.org/trac/wiki/TOC
More information about the Openchrome-devel
mailing list