[Openchrome-devel] [Bug 106326] openchrome git failed on xubuntu 18.04

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=106326

--- Comment #40 from Kevin Brace <kevinbrace at gmx.com> ---
Okay, that's good that at least the basic functionality is working.
Regarding standby, after you resume the computer, is the computer still
running?
There are models where the computer completely locks up.
You can tell this by pressing Caps Lock or Number Lock to see if the LED
toggles.
If the LED toggles, then the computer is still running.
What you can do is you can ssh into the computer to collect the register dump
data.
To be honest, I do not know how to do this.
The lazy method I use to collect the register dump data by copying via_reg_tool
to /home/("Your user name"), and run via_reg_tool from there.
If the screen is dead after resume but the computer is running, you can switch
to the VT (Virtual Terminal) by pressing Alt + F1, enter your user name and
password, then run via_reg_tool.
In this case, you will have to enter it by the keyboard while the screen is
dead, so it is a little hard to pull this off.
If VGA is alive then you life is much easier since you have that screen to
collect the register dump data.
The data I want here is the before and after standby resume register dump data.
I already have the before standby data, so all you need to collect is the after
standby data.


(In reply to sebastien from comment #38)
> yes, i was able to disable and enable the flat panel in dual screen mode.
> 
> suspend/resume don't work

-- 
You are receiving this mail because:
You are on the CC list for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/openchrome-devel/attachments/20180514/0d664d14/attachment.html>