[Openchrome-users] problem with mplayer xvmc vo

[Marco Sinhoreli]

Hello Folks,

I set my system to enable xvmc accelerator for use with my video card (CLE266)

Xorg.0.log result:
(II) VIA(0): direct rendering enabled
(II) VIA(0): [XvMC] Initialized XvMC extension.

I compile the ffmpeg and mplayer release 1.0pre6a and I apply the
patch of the unichrome project (MPlayer-1.0pre6a-unichrome-0.5):
# ./configure --enable-largefiles --enable-menu --enable-network
--enable-ftp --enable-xxmc --with-xxmclib=viaXvMC

After I run:
# make && make install

When I run the mplayer, the mplayer verbose result on "Video: no video"

The command syntax  is below:
# mplayer -vo xvmc -vc ffmeg2mc filename
MPlayer 1.0pre6-3.3.5 (C) 2000-2004 MPlayer Team
CPU: IDT/Centaur/VIA C3 Samuel 2 (WinChip C5B core)/C3 Ezra (Family: 6, Stepping
: 3)
Detected cache-line size is 32 bytes
CPUflags:  MMX: 1 MMX2: 0 3DNow: 1 3DNow2: 0 SSE: 0 SSE2: 0
Compiled for x86 CPU with extensions: MMX 3DNow


Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup
scripts.
Playing VIVO_AMIGOS2.mpg.
MPEG-PS file format detected.
VIDEO:  MPEG1  800x600  (aspect 1)  29,970 fps  8000,0 kbps (1000,0 kbyte/s)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 16000->192000 (128,0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
vo: X11 running at 800x600 with depth 16 and 16 bpp (":0.0" => local display)
vo_xvmc: X-Video extension 2.2
vo_xvmc: X-Video MotionCompensation Extension version 1.0
==========================================================================
Forced video codec: ffmpeg2mc
Read DOCS/HTML/en/codecs.html!
==========================================================================
Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
alsa-init: got device=0, subdevice=0
alsa-init: 1 soundcard found, using: default
alsa: 48000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit Little Endian
AO: [alsa] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
Video: no video
Starting playback...

1- The cpu not is used. (Viewed on "top")
2- No video on monitor.
--
Marco Sinhoreli
C-x C-s

MPlayer-1.0pre6a-unichrome-0.5