[Openchrome-users] 720x576Noscale does not work
Udo van den Heuvel
udovdh
Mon Feb 13 07:26:14 PST 2006
Hello,
On my VIA SP8000 I cannot get 720x576Noscale to work @ 24-bit color.
The result is a warped or wrapped picture.
It works fine at 16-bit color. Plain 720x576 does work @ 24-bit color.
Why Oh Why? I did check several sites but could not find the cure.
Below is parts of my xorg.conf, composed of info from surfing the web:
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "CTX VL700 series, MS700 series, PL7 series"
DisplaySize 330 250
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 75.0
Option "dpms"
EndSection
Section "Monitor"
Identifier "TV"
VendorName "Philips"
ModelName "Unknown"
# Set for 4:3 display
DisplaySize 400 300
HorizSync 24.0 - 80.0
VertRefresh 50.0 - 75.0
Option "nodpms"
Option "noddc"
#Refresh Rate 60Hz
ModeLine "720x480" 26.7 720 736 808 896 480 481 484 497
ModeLine "720x576" 32.7 720 744 816 912 576 577 580 597
ModeLine "848x480" 31.5 848 864 952 1056 480 481 484 497
ModeLine "856x480" 31.7 856 872 960 1064 480 481 484 497
ModeLine "1024x512" 41.3 1024 1056 1160 1296 512 513 516 531
EndSection
Section "Device"
Identifier "Videocard0"
Driver "via"
VendorName "VIA"
BoardName "EPIA SP8000"
BusID "PCI:1:0:0"
Option "ActiveDevice" "CRT,TV" # CRT,
Option "TVDotCrawl" "True"
Option "TVType" "PAL"
Option "TVOutput" "Composite"
Option "EnableAGPDMA" "true"
Option "PciRetry" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "TV"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
# Modes "800x600" "640x480"
# Modes "720x576"
Modes "720x576Noscale"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
# Modes "800x600" "640x480"
Modes "720x576" # add for testing, does work
Modes "720x576Noscale" # this one gives warped image
EndSubSection
EndSection
Anyone here that sees the cause of this weird (for me at least) behaviour?
Kind regards,
Udo
More information about the Openchrome-users
mailing list