[Openchrome-users] DRI / DRM not working unichrome pro
Karl Hiramoto
karl
Mon Feb 20 04:21:25 PST 2006
Hi I'm using the svn latest rev 161, openchrome on a via epia 13000
kernel 2.6.15.4
Xorg 7.0.0
From glxinfo i have:
Direct Rendering: No
I see an error in my Xorg.0.log
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
In my Xorg.0.log:
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.0.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
II) VIA: driver for VIA chipsets: CLE266, KM400/KN400, K8M800,
PM800/PM880/CN400, VM800
(II) Primary Device is: PCI 01:00:0
(--) Chipset PM800/PM880/CN400 found
(!!) VIA Technologies does not support or endorse this driver in any way.
(!!) For support, please refer to http://www.openchrome.org/ or
(!!) your X vendor.
(!!) (development build, at svn revision )
II) Setting vga for screen 0.
(II) VIA(0): VIAPreInit
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(II) VIA(0): VIAGetRec
(**) VIA(0): Depth 24, (--) framebuffer bpp 32
(==) VIA(0): RGB weight 888
(==) VIA(0): Default visual is TrueColor
(==) VIA(0): Using XAA acceleration architecture
(==) VIA(0): Using HW cursor
(--) VIA(0): Chipset: "PM800/PM880/CN400"
(II) VIA(0): VIAMapMMIO
(--) VIA(0): mapping MMIO @ 0xe8000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xe8200000 with size 0x10000
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) VIA(0): Chipset Rev.: 0
(WW) VIA(0): Manufacturer plainly copied main PCI ids to Subsystem/Card ids.
(--) VIA(0): Detected VIA VT3118 (PM800).
(II) VIA(0): Detected MemClk 6
(II) VIA(0): ViaGetMemoryBandwidth
(II) VIA(0): Detected TV Standard: NTSC.
(==) VIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) VIA(0): videoram = 32768k
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) VIA(0): ViaI2CInit
(II) VIA(0): ViaI2CBus1Init
(II) VIA(0): I2C bus "I2C bus 1" initialized.
////
In dmesg i have:
agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
agpgart: AGP aperture is 32M @ 0xea000000
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:11.5 to 64
lirc_dev: IR Remote Control driver registered, at major 61
lirc_serial: auto-detected active low receiver
lirc_dev: lirc_register_plugin: sample_rate: 0
[drm] Initialized drm 1.0.0 20040925
# lspci
00:00.0 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
00:0f.0 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
(rev 78)
01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome
Pro VGA Adapter (rev 02)
Any idea how to fix this?
Thanks,
-Karl
More information about the Openchrome-users
mailing list