[Openchrome-users] Openchrome on Suse 10.1

Fri Jun 2 03:08:24 PDT 2006

Hi,
i?m using a VIA K8M800 on an x86_64 board. I confgigured my Xserver with
Sax with the option m 0=via.
My xorg.conf looks:

Section "Device"
BoardName "Framebuffer Graphics"
BusID "1:0:0"
Driver "via"
Identifier "Device[0]"
Option "EnableAGPDMA"
Option "PanelSize" "1024x768"
VendorName "VESA"
EndSection

Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
Load "dri"
Load "v4l"
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection

In my xorg.log i get the following:

X Window System Version 6.9.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 6.9
Build Operating System: SuSE Linux [ELF] SuSE
Current Operating System: Linux egal 2.6.16.19-
SL101_BRANCH_20060531173846-default #1 Wed May 31 17:38:46 UTC 2006
x86_64
Build Date: 02 May 2006
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 1 10:47:58 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout[all]"
----------------------------------------------------------------------
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib64/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib64/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib64/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib64/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib64/modules/drivers/v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.0.1
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "via"
(II) Loading /usr/X11R6/lib64/modules/drivers/via_drv.so
(II) Module via: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 0.1.33
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
----------------------------------------------

(II) v4l driver for Video4Linux
(II) VIA: driver for VIA chipsets: CLE266, KM400/KN400, K8M800,
PM800/PM880/CN400
(II) Primary Device is: PCI 01:00:0
(--) Chipset K8M800 found
(!!) VIA Technologies does not support or endorse this driver in any
way.
(!!) For support please contact the driver maintainer or your X vendor.
(II) resource ranges after xf86ClaimFixedResources() call:
------------------------------------------------------------------------
----

(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib64/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(**) VIA(0): Depth 24, (--) framebuffer bpp 32
(==) VIA(0): RGB weight 888
(==) VIA(0): Default visual is TrueColor
(**) VIA(0): Option "PanelSize" "1024x768"
(**) VIA(0): Option "EnableAGPDMA"
(==) VIA(0): Using HW cursor
(**) VIA(0): Option: EnableAGPDMA - Enabling AGP DMA
(**) VIA(0): Selected Panel Size is 1024x768
(--) VIA(0): Chipset: "K8M800"
(--) VIA(0): mapping MMIO @ 0xfb000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xfb200000 with size 0x10000
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(--) VIA(0): Chipset Rev.: 0
(--) VIA(0): Detected Asus K8V-MX.
(==) VIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) VIA(0): videoram = 65536k
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib64/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) VIA(0): I2C bus "I2C bus 1" initialized.
(II) VIA(0): I2C bus "I2C bus 2" initialized.
(II) VIA(0): I2C bus "I2C bus 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib64/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) VIA(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) VIA(0): I2C device "I2C bus 1:ddc2" removed.
(II) VIA(0): Monitor[0]: Using hsync range of 31.00-80.00 kHz
(II) VIA(0): Monitor[0]: Using vrefresh range of 60.00-75.00 Hz
(II) VIA(0): Clock range: 20.00 to 230.00 MHz
------------------------------------------------------------------------
(**) VIA(0): Display dimensions: (335, 265) mm
(**) VIA(0): DPI set to (77, 73)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib64/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib64/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib64/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.9.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
----------------------------------------------------------
(--) VIA(0): mapping framebuffer @ 0xf4000000 with size 0x4000000
(==) VIA(0): Write-combining range (0xf4000000,0x4000000)
(--) VIA(0): Frame buffer start: 0x2b2e9ad8c000, free start: 0x300000
end: 0x4000000
(--) VIA(0): mapping MMIO @ 0xfb000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xfb200000 with size 0x10000
(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(II) VIA(0): 3D Engine has been initialized.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) VIA(0): [drm] DRM interface version 1.2
(II) VIA(0): [drm] created "via" driver at busid "PCI:1:0:0"
(II) VIA(0): [drm] added 8192 byte SAREA at 0x10009000
(II) VIA(0): [drm] mapped SAREA 0x10009000 to 0x2b2e9edb5000
(II) VIA(0): [drm] framebuffer handle = 0xf4000000
(II) VIA(0): [drm] added 1 reserved context for kernel
(II) VIA(0): [dri] visual configs initialized.
(II) VIA(0): [drm] register handle = 0xfb000000
(II) VIA(0): [drm] mmio Registers = 0xfb000000
(II) VIA(0): [dri] mmio mapped.
(II) VIA(0): VIAInternalScreenInit
(II) VIA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
10 256x256 slots
32 8x8 color pattern slots
(==) VIA(0): Backing store disabled
(II) VIA(0): [drm] Detected AGP vendor 0x1106, device 0x204
(II) VIA(0): [drm] Found AGP v3 compatible device. Trying AGP 8X mode.
(II) VIA(0): [drm] Trying to enable AGP fast writes.
(II) VIA(0): [drm] drmAgpEnabled succeeded
(II) VIA(0): [drm] agpAddr = 0xf0000000
(II) VIA(0): [drm] agpBase = (nil)
(II) VIA(0): [drm] agpAddr = 0xf0000000
(II) VIA(0): [drm] agpSize = 0x01e00000
(II) VIA(0): [drm] agp physical addr = 0x00000000
(II) VIA(0): [dri] use agp.
(II) VIA(0): [drm] FBFreeStart= 0x00800000 FBFreeEnd= 0x03fbf000 FBSize=
0x037bf000
(II) VIA(0): [dri] frame buffer initialized.
(II) VIA(0): X context handle = 0x1
(II) VIA(0): [drm] installed DRM signal handler
(II) VIA(0): [DRI] installation complete
(II) VIA(0): [dri] kernel data initialized.
(II) VIA(0): [drm] Irq handler installed, using IRQ 193.
(II) VIA(0): [drm] Initialized AGP ring-buffer, size 0x200000 at AGP
offset 0x1e00000.
(II) VIA(0): direct rendering enabled
(II) VIA(0): Using default xfree86 memcpy for video.
(II) VIA(0): [XvMC] Registering viaXvMC.
(II) VIA(0): [XvMC] Initialized XvMC extension.
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE

When i run glxinfo, i get the output:
glxinfo -v
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:

By calling the Yast configuration for X, the graphic-card is named: VESA
Framebuffer Graphics.

Why does the xorg.log show the loading of libdri.so (not unichrome.dri)?
And why does glxinfo show no direct rendering, while xorg.log shows dri
and drm loadet?