[Openchrome-users] Having problems getting X to start with Openchrome
Chad
masterclc
Mon Mar 27 14:22:52 PST 2006
Evenin!
I may just be totally missing the ball here, so feel free to point out
the obvious.
I installed OpenChrome on my new system (P4M800CE) and created a new
xorg.conf (xorgconfig) and went to startx and get an error:
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 27 15:10:53 2006
(==) Using config file: "/etc/X11/xorg.conf"
(WW) via: No matching Device section for instance (BusID PCI:1:0:0) found
(EE) No devices detected.
This is the new Modular X.org version 7.0.0
Not sure what to do next. If I change the line in my xorg.conf from
Driver "via" to "vesa" it works of course. I'll post up my
/var/log/Xorg.0.log and my /etc/X11/xorg.conf, my lspci and my lsmod
(this is a diskless workstation, but I do have *some* modules). I'm
running Gentoo, and have a 2.6.16 kernel with AGPGart compiled into
the kernel (not module). Any ideas are very welcome, Thanks!
Xorg.0.log
===========================
X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.12 i686
Current Operating System: Linux mythtoo 2.6.16-gentoo #1 PREEMPT Mon Mar 27 01:5
5:09 MST 2006 i686
Build Date: 21 March 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 27 15:10:53 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Hansol 910"
(**) | |-->Device "ViaPro"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(**) FontPath set to "/usr/share/fonts/misc,/usr/share/fonts/100dpi,/usr/share/f
onts/TTF,/usr/share/fonts/Type1"
(**) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0314 card 1106,0314 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1314 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2314 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3208 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4314 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:7: chip 1106,7314 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0f:0: chip 1106,0571 card 1565,3206 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1565,3206 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1565,3206 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1565,3206 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1565,3206 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1565,3206 rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1106,3227 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1565,8212 rev 60 class 04,01,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1106,0102 rev 78 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1106,3344 card 1565,1202 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) unknown vendor (0x1106) unknown chipset (0x3344) rev 1, Mem @
0xf4000000/26, 0xf8000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf0000000 from 0xf3ffffff to 0xeffffff
f
(II) Active PCI resource ranges:
[0] -1 0 0xfa001000 - 0xfa0010ff (0x100) MX[B]
[1] -1 0 0xfa000000 - 0xfa0000ff (0x100) MX[B]
[2] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[3] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[B](B)
[4] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[5] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[6] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[7] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[11] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfa001000 - 0xfa0010ff (0x100) MX[B]
[1] -1 0 0xfa000000 - 0xfa0000ff (0x100) MX[B]
[2] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[3] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[B](B)
[4] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[5] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[6] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[7] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[11] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfa001000 - 0xfa0010ff (0x100) MX[B]
[6] -1 0 0xfa000000 - 0xfa0000ff (0x100) MX[B]
[7] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[8] -1 0 0xf8000000 - 0xf8ffffff (0x1000000) MX[B](B)
[9] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[13] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[14] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[18] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.0.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "via"
(II) Loading /usr/lib/xorg/modules/drivers/via_drv.so
(II) Module via: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 0.1.33
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.4
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) VIA: driver for VIA chipsets: CLE266, KM400/KN400, K8M800,
PM800/PM880/CN400
(II) Primary Device is: PCI 01:00:0
(WW) via: No matching Device section for instance (BusID PCI:1:0:0) found
(EE) No devices detected.
Fatal server error:
no screens found
==================================================
/etc/X11/xorg.conf:
==================================================
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2" # IntelliMouse PS/2
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Hansol 910"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5-50
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 40-90
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "ViaPro"
Driver "via"
#VideoRam 32768
BusID "AGP:01:00.0"
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "ViaPro"
Monitor "Hansol 910"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
===========================================================
lspci -v:
==================================
00:00.0 Host bridge: VIA Technologies, Inc. P4M800CE Host Bridge
Subsystem: VIA Technologies, Inc. P4M800CE Host Bridge
Flags: bus master, 66MHz, medium devsel, latency 8
Memory at f0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [80] AGP version 3.5
Capabilities: [50] Power Management version 2
00:00.1 Host bridge: VIA Technologies, Inc. P4M800CE Host Bridge
Flags: bus master, medium devsel, latency 0
00:00.2 Host bridge: VIA Technologies, Inc. P4M800CE Host Bridge
Flags: bus master, medium devsel, latency 0
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
Flags: bus master, medium devsel, latency 0
00:00.4 Host bridge: VIA Technologies, Inc. P4M800CE Host Bridge
Flags: bus master, medium devsel, latency 0
00:00.7 Host bridge: VIA Technologies, Inc. P4M800CE Host Bridge
Flags: bus master, medium devsel, latency 0
decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: f4000000-f7ffffff
Capabilities: [70] Power Management version 2
00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/
C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Biostar Microtech Int'l Corp Unknown device 3206
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d000 [size=16]
Capabilities: [c0] Power Management version 2
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 81) (prog-if 00 [UHCI])
Subsystem: Biostar Microtech Int'l Corp Unknown device 3206
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 81) (prog-if 00 [UHCI])
Subsystem: Biostar Microtech Int'l Corp Unknown device 3206
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 81) (prog-if 00 [UHCI])
Subsystem: Biostar Microtech Int'l Corp Unknown device 3206
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 81) (prog-if 00 [UHCI])
Subsystem: Biostar Microtech Int'l Corp Unknown device 3206
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHC
I])
Subsystem: Biostar Microtech Int'l Corp Unknown device 3206
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at fa000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T89
0 South]
Subsystem: VIA Technologies, Inc. DFI KT600-AL Motherboard
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 A
C97 Audio Controller (rev 60)
Subsystem: Biostar Microtech Int'l Corp Unknown device 8212
Flags: medium devsel, IRQ 10
I/O ports at e400 [size=256]
Capabilities: [c0] Power Management version 2
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet Con
troller on VT8235
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at ec00 [size=256]
Memory at fa001000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
01:00.0 VGA compatible controller: VIA Technologies, Inc. UniChrome Pro IGP (rev
01) (prog-if 00 [VGA])
Subsystem: Biostar Microtech Int'l Corp Unknown device 1202
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
Memory at f4000000 (32-bit, prefetchable) [size=64M]
Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at f9000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Capabilities: [70] AGP version 3.0
==============================================================
lsmod:
===================================
Module Size Used by
via 42848 0
drm 61076 1 via
agpgart 25648 1 drm
snd_via82xx 22036 0
snd_ac97_codec 88736 1 snd_via82xx
snd_ac97_bus 1920 1 snd_ac97_codec
snd_pcm 73992 2 snd_via82xx,snd_ac97_codec
snd_timer 19588 1 snd_pcm
snd_page_alloc 8072 2 snd_via82xx,snd_pcm
snd_mpu401_uart 6016 1 snd_via82xx
snd_rawmidi 19744 1 snd_mpu401_uart
snd_seq_device 6668 1 snd_rawmidi
snd 43236 7
snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 7392 1 snd
i2c_viapro 7444 0
i2c_core 16784 1 i2c_viapro
ehci_hcd 26376 0
uhci_hcd 27920 0
usbcore 108420 3 ehci_hcd,uhci_hcd
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal
More information about the Openchrome-users
mailing list