[Openchrome-users] VN800 Laptop Support

[Aaron Moses]

HI,

I have a gateway MX3220b with a VN800. Ive got the driver somewhat working
under Ubuntu Dapper Drake using the svn drivers and a cvs copy of drm. The
driver instillation was similar to Martin's, but I used ./autogen.sh
--prefix=/usr/ (autogen.sh automatically runs ./configure so you don't need
this step) to get the modules in the right path for Ubuntu (means you don't
need to add 'ModulePath "/usr/local/lib/xorg/modules"' to the xorg.conffile) .

once this is done you can check out and compile drm as detailed on the wiki
http://wiki.openchrome.org/tikiwiki/tiki-index.php?page=Compiling+the+source+code
(follow the instructions for Xorg 7.0. or later - Direct Rendering Manager)

To get this to work for the vn800 you will have to add the line:-

0x1106 0x3344 0 "VIA P4VM800PRO"

to the [viadrv] section of the files shared-core/drm_pciids.txt and
shared/drm_pciids.txt (in the drm source code) so that it recognises the
chip.
(Do this before making the kernel modules)

also for Ubuntu you should use ./configure --prefix=/usr/ instead of
./configure so that everything can be found properly.

After all this you should have a somewhat working driver. Opengl works for
me but xv just results in a coloured section on the screen where the video
should be (you can use opengl video rendering instead, but I find its not
powerful enough for DVDs). Also I find I cant change resolutions without
rebooting as the screen gets messed up (looks like its not figuring out
where the end of each horizontal line of the image is).

I've spoken with Ivor about this and he got me to try some things with the
overlay and xvtest card, but the most we managed to achieve was changing the
colour of the overlay section where the video should be.

The procedure I described above should be similar for fedora core 5, if you
manage to get it working for a distro other than ubuntu Id be interested in
hearing your outcome!

Also with the Gateway laptop Network Manager is no longer playing nice with
the built in wifi card (broardcom), it used to work perfectly but since a
recent update its stopped. I have to manually bring it up and down. I'd be
interested in hearing your experiences with this.

I hope some of this was at least vaguely useful.

Aaron


Hi Bill,
> I use Ubuntu Dapper (current Ubuntu development release, it will get
> stable at 1st June).
>
> The procedure was like that:
>
> sudo apt-get install  subversion build-essential automake1.9 libtool
> pkg-config xserver-xorg-dev libxvmc-dev x11proto-gl-dev libglu1-mesa-dev
> mkdir openchrome
> cd openchrome
> svn co http://svn.openchrome.org/svn/trunk
> cd trunk
> ./autogen.sh
> ./configure
> make
> sudo make install
>
> Then I added
>
> ModulePath "/usr/lib/xorg/modules"
> ModulePath "/usr/local/lib/xorg/modules"
>
> to my "Files" section in my xorg.conf and changed Driver in the Section
> "Device" to via.
>
> Please note that xv support with VN800 is currently broken, I already
> opened a trac ticket.
>
> Martin
>
> spambot schrieb:
> > Hi Martin
> >
> > That's great!!
> >
> > Which Linux Distribution did you use? And if you don't mind what was the
> > procedure, just install the X RPMs and then select the VIA driver in the
> X
> > Windows "Display" configuration applet?
> >
> > Thanks,
> >
> > Bill.
> >
> >
> > -----Original Message-----
> > From: Martin Juergens [mailto:martin at gamesplace.info]
> > Sent: Friday, May 26, 2006 4:52 PM
> > To: openchrome-users at openchrome.org
> > Cc: spambot
> > Subject: Re: [Openchrome-users] VN800 Laptop Support
> >
> > Hi spambot,
> > I have a Fujitsu Siemens laptop with a VN800 chipset, too and I was able
> to
> > use the openchrome drivers without any problems. If you want, I can give
> you
> > my compiled Xorg 7 via driver.
> >
> > Martin
> >
> > spambot schrieb:
> >
> >> Hi Team,
> >>
> >> I have a Gateway MX3210 laptop with VIA Unichrome VN800 Graphics and a
> >> 1280x768 display.
> >>
> >> I've installed Fedora Core 5 and Centos V4.3. On both i tried getting
> >> the OpenChrome drivers to work, but i did not have any luck.
> >>
> >> For Centos V4.3, i installed the Xwindows RPMS, rebooted the computer,
> >> selected the VIA driver in X-Windows, and then tried to log out. The
> >> screen went black and that was the end of that. Is the VN800 and a LCD
> >> laptop panel a supported configuration?
> >>
> >> Also what is the process for customizing the resolution list in the
> >> Gnome Desktop -> Display utility to add the 1280x768, resolution?
> >>
> >> Any help will be appreciated!
> >>
> >> Thanks,
> >>
> >> Bill G.
> >> ------------------------------

----------------------------------------
>> --
>>
>> _______________________________________________
>> openchrome-users mailing list
>> openchrome-users at openchrome.org
>> http://wiki.openchrome.org/mailman/listinfo/openchrome-users
>> Main page:
>> http://www.openchrome.org
>> Wiki:
>> http://wiki.openchrome.org
>> User Forum:
>> http://wiki.openchrome.org/tikiwiki/tiki-view_forum.php?forumId=1
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://wiki.openchrome.org/pipermail/openchrome-users/attachments/20060528/ece9e028/attachment.html