[Openchrome-users] CX700M2 blank screan...

[Damian Kolkowski]

Hi there,

I Have a problem with CX700M2:

[root at localhost ~]# lspci -v | grep VGA -A 6
01:00.0 VGA compatible controller: VIA Technologies, Inc. CX700M2 UniChrome 
PRO II Graphics (rev 03) (prog-if 00 [VGA])
        Subsystem: FIRST INTERNATIONAL Computer Inc Unknown device 2d30
        Flags: bus master, 66MHz, medium devsel, latency 16, IRQ 20
        Memory at a0000000 (32-bit, prefetchable) [size=512M]
        Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [60] Power Management version 2
        Capabilities: [70] AGP version 3.0
[root at localhost ~]#

I have compiled openchrome from SVN, and then after X server starts, I have:

[root at localhost openchrome]# cat /var/log/Xorg.0.log | grep EE
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(EE) CHROME(0): Unknown Card-Ids (3157|1509|2D30); please report to 
openchrome-users at openchrome.org
[root at localhost openchrome]# 

So I have add my chp-id to via_id.c:

{"VIA VT8380D (CX700M2)", VIA_CX700, 0x1509, 0x2D30, VIA_DEVICE_LCD},

And now I do not have (EE), but screen is still blank :-(

Tak a look:

[root at localhost openchrome]# startx
xauth:  creating new authority file /root/.serverauth.6409

X Window System Version 1.3.0

Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Fedora 8 Red Hat, Inc.
Current Operating System: Linux localhost.localdomain 2.6.23.9-85.fc8 #1 SMP 
Fri Dec 7 15:49:59 EST 2007 i686
Build Date: 13 December 2007
Build ID: xorg-x11-server 1.3.0.0-37.fc8
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 27 17:31:59 2007
(==) Using config file: "/etc/X11/xorg.conf"
(II) Module already built-in
(II) Module already built-in
(II) Module already built-in
Freed 4917760 (pool 1)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Synaptics DeviceInit called
SynapticsCtrl called.
Synaptics DeviceOn called

waiting for X server to shut down Synaptics DeviceOff called


xinit:  unexpected signal 2.
[root at localhost openchrome]#

Whay should I do?

Take ceare.


P.S. I also have recompile drm module from git.freedesktop.org/git/mesa/drm 
but with no effect.

-- 
Damian Kolkowski