[Openchrome-users] Fwd: Re: Trying to use 1280x800: no mode of this name

[Roger Dover]

-------- Original-Nachricht --------

Datum: Wed, 24 Jan 2007 14:01:37 +0000

Von: John Robinson <john.robinson at anonymous.org.uk>

An: Roger Dover <rdover at gmx.net>

Betreff: Re: [Openchrome-users] Trying to use 1280x800: no mode of this name



> On 24/01/2007 06:56, Roger Dover wrote:

> > I have a Fujitsu-Siemens Amilo Pro V2055 laptop, with a Via Unichome

> > VN800 chipset and a widescreen 1280x800 display.

> > 

> > I have compiled the openchrome driver, and it successfully detects my

> > chipset and works fine on 1280x768 resolution.

> > 

> > I have put a modeline in xorg.conf for 1280x800, but the mode seems to

> be rejected for some reason.

> > 

> > xorg.conf looks like this:

> > -

> > Section "Monitor"

> >         Identifier      "Generic Monitor"

> >         Option          "DPMS"

> >         # 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz

> >         Modeline "1280x800_60.00"  83.46  1280 1344 1480 1680  800 801

> 804 828

> > -HSync +Vsync

> > 

> > EndSection

> > 

> > Section "Screen"

> >         Identifier      "Default Screen"

> >         Device          "Generic Video Card"

> >         Monitor         "Generic Monitor"

> >         DefaultDepth    24

> >         SubSection "Display"

> >                 Depth           24

> >                 Modes           "1280x800_60.00"

> >         EndSubSection

> > EndSection

> > -
> > 

> > This is what is in Xorg.0.log:

> >

> -
> > (II) VIA(0): Generic Monitor: Using default hsync range of 31.50-37.90

> kHz

> > (II) VIA(0): Generic Monitor: Using default vrefresh range of

> 50.00-70.00 Hz

> > (II) VIA(0): Not using mode "1280x800_60.00" (no mode of this name)

> > (II) VIA(0): Attempting to use 60Hz refresh for mode "800x600" (115)

> > (II) VIA(0): Attempting to use 60Hz refresh for mode "640x480" (112)

> > (--) VIA(0): Virtual size is 1600x1200 (pitch 1600)

> > (**) VIA(0):  Built-in mode "1600x1200"

> > (**) VIA(0):  Built-in mode "1400x1050"

> > (**) VIA(0):  Built-in mode "1280x1024"

> > (**) VIA(0):  Built-in mode "1280x800"

> > (**) VIA(0):  Built-in mode "1280x768"

> > (**) VIA(0):  Built-in mode "1024x768"

> > (**) VIA(0):  Built-in mode "800x600": 0.0 MHz, 37879.3 kHz, 60.8 Hz

> > (II) VIA(0): Modeline "800x600"    0.00  800 0 0 0  600 0 0 0

> > (**) VIA(0):  Built-in mode "640x480": 0.0 MHz, 31500.5 kHz, 60.5 Hz

> > (II) VIA(0): Modeline "640x480"    0.00  640 0 0 0  480 0 0 0

> > (++) VIA(0): DPI set to (100, 100)

> >

> -

> > 

> > Any ideas what went wrong here ?

> 

> Have a look a bit further up the log for 1280x800_60.00 and if there 

> isn't a previous mention, you need more logging (with `X --logverbose` I 

> think); there must be some reason.

> 

> Cheers,

> 

> John.



Hi,



I tried with -logverbose 9, but that line is the only occurrence of

1280x800_60.00 in the entire logfile.



Cheers,

Roger

-- 
"Feel free" - 5 GB Mailbox, 50 FreeSMS/Monat ...
Jetzt GMX ProMail testen: http://www.gmx.net/de/go/promail