[Openchrome-users] issues with a VIA Chrome9 HC IGP (1106:3371)

Javier Martínez jamarsa
Wed Mar 7 05:41:21 PST 2007


I downloaded yesterday the latest svn driver (rev 280M)  and after tinkering a  bit with  the  PCI ids , I managed to get it to work with this card, i.e. modifying/adding the following lines in the vt3336 branch:

via_id.h:
#define PCI_CHIP_VT3336         0x3371 /* K8M890 */

via_id.c:
    {"Chrome9 HC IGP",                         VIA_K8M890,  0x1106, 0x3371, VIA_DEVICE_CRT | VIA_DEVICE_LCD},


There is only a small (but very annoying) issue: when exiting from gnome, or using CTRL-ALT-Backspace, the system always hangs showing only my background pic (I gather hangs exiting from Xorg). Searching the maillist, there was a similar bug with K8M890 (http://openchrome.org/trac/ticket/86) but seems corrected in svn 280M. Tried forcing again the soft reset instruction, with no improvement.

It fails even with dri and glx modules commented and the "NoAccel" option enabled.

This is my lspci info (the bit referring to the VGA card):

01:00.0 VGA compatible controller: VIA Technologies, Inc. Chrome9 HC IGP (rev 01) (prog-if 00 [VGA])
        Subsystem: VIA Technologies, Inc. Chrome9 HC IGP
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (500ns min)
        Interrupt: pin A routed to IRQ 50
        Region 0: Memory at d8000000 (32-bit, prefetchable)  [size=64M]
        Region 1: Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
        [virtual] Expansion ROM at de000000 [disabled] [size=64K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [70] AGP version 3.0
                Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
                 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>

see attached Xorg.log and xorg.conf  for more info.

Thanks in advance for your help,
Javier.
 		
---------------------------------

LLama Gratis a cualquier PC del Mundo.
Llamadas a fijos y m?viles desde 1 c?ntimo por minuto.
http://es.voice.yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://wiki.openchrome.org/pipermail/openchrome-users/attachments/20070307/aba0991e/attachment.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: xorg.conf.via
Type: application/octet-stream
Size: 4127 bytes
Desc: pat602751722
Url : http://wiki.openchrome.org/pipermail/openchrome-users/attachments/20070307/aba0991e/xorg.conf.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0.log.gz
Type: application/x-gzip
Size: 10010 bytes
Desc: 3729682390-Xorg.0.log.gz
Url : http://wiki.openchrome.org/pipermail/openchrome-users/attachments/20070307/aba0991e/Xorg.0.log.bin



More information about the Openchrome-users mailing list