[Openchrome-users] HP 2133 1.6 2GB/120 WLAN BT 3-CELL 8.9#VHB
Jon Nettleton
jon.nettleton
Sun Dec 21 15:41:07 PST 2008
On Mon, Dec 22, 2008 at 10:33 AM, Robert Bridge <robert at robbieab.com> wrote:
> Johan T?rnklint wrote:
>> Sure, send your xorg.conf will be very appriciated! thanks!
>
>
> Attached...
>
> It is a bit of a mess really, as it was put together using X -configure
> and than tweaking to suit. However it does get the panel right.
>
> Section "ServerLayout"
> Identifier "X.org Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
> RgbPath "/usr/share/X11/rgb"
> ModulePath "/usr/lib/xorg/modules"
> FontPath "/usr/share/fonts/misc/"
> FontPath "/usr/share/fonts/TTF/"
> FontPath "/usr/share/fonts/OTF"
> FontPath "/usr/share/fonts/Type1/"
> FontPath "/usr/share/fonts/100dpi/"
> FontPath "/usr/share/fonts/75dpi/"
> EndSection
>
> Section "Module"
> #Load "dri"
> Load "GLcore"
> Load "extmod"
> Load "xtrap"
> Load "record"
> Load "glx"
> Load "dbe"
> Load "type1"
> Load "freetype"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> Option "XkbLayout" "uk"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/input/mice"
> Option "ZAxisMapping" "4 5 6 7"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "Monitor Model"
> ModeLine "1280x768" 77.37 1280 1344 1480 1680 768 769 772 794
> DisplaySize 193 117
> EndSection
>
> Section "Device"
> ### Available Driver options are:-
> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> ### [arg]: arg optional
> #Option "PrintVGARegs" # [<bool>]
> #Option "PrintTVRegs" # [<bool>]
> #Option "I2CScan" # [<bool>]
> #Option "VBEModes" # [<bool>]
> #Option "NoAccel" # [<bool>]
> Option "AccelMethod" "XAA" # <str>
> #Option "ExaNoComposite" # [<bool>]
> #Option "ExaScratchSize" # <i>
> Option "SWCursor" "on" # [<bool>]
> #Option "ShadowFB" # [<bool>]
> #Option "Rotate" # [<str>]
> #Option "VideoRAM" # <i>
> #Option "ActiveDevice" # [<str>]
> #Option "BusWidth" # [<str>]
> #Option "Center" # [<bool>]
> #Option "PanelSize" # [<str>]
> Option "ForcePanel" "on" # [<bool>]
> #Option "TVDotCrawl" # [<bool>]
> #Option "TVDeflicker" # <i>
> #Option "TVType" # [<str>]
> #Option "TVOutput" # [<str>]
> #Option "DisableVQ" # [<bool>]
> #Option "DisableIRQ" # [<bool>]
> #Option "EnableAGPDMA" # [<bool>]
> #Option "NoAGPFor2D" # [<bool>]
> #Option "NoXVDMA" # [<bool>]
> #Option "VbeSaveRestore" # [<bool>]
> #Option "DisableXvBWCheck" # [<bool>]
> #Option "MaxDRIMem" # <i>
> #Option "AGPMem" # <i>
> Identifier "Card0"
> Driver "openchrome"
> VendorName "Unknown Vendor"
> BoardName "Unknown Board"
> BusID "PCI:1:0:0"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> SubSection "Display"
> Viewport 0 0
> Depth 1
> Modes "1280x768"
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 4
> Modes "1280x768"
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 8
> Modes "1280x768"
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 15
> Modes "1280x768"
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 16
> Modes "1280x768"
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 24
> Modes "1280x768"
> EndSubSection
> EndSection
Well all I can say is that is completely broken. That chipset is
trying to use the bios modes to set the resolution and the bios is
only giving back 1 resolution. If you guys are interested in helping
debug things, I will post a patch to try and get proper Panel
Modesetting on your chipset.
The timing will be weird because I am down in Melbourne AU now. With
some patience I think we can get this fixed up for you by Xmas.
Jon
More information about the Openchrome-users
mailing list