[Openchrome-users] CX700M(2) on VIA EPIA-EX15000G
bWare@iWare.co.uk
bWare
Wed Feb 13 06:02:05 PST 2008
Hi Tobias,
You ranges look sensible (and work from me on a PX1000 with CX700M(2)).
This is a shot in the dark by have you tried adding:
Option "VBEModes" "true"
to
Section "Device"
This is documented as preventing a similar black screen on DVI output.
Barnaby
Tobias Ceglarek wrote:
> Hello again,
>
>> Either manually set proper values for your monitor
>
> I am not an expert in configuring X, but I have tried out to manually
> set the values by adding
>
> HorizSync 30-80
> VertRefresh 30-100
>
> in the xorg.conf. Then the output is a little bit different (without the
> message "vrefresh out of range"):
>
> ...
> (II) CHROME(0): monitor0: Using default hsync range of 30.00-80.00 kHz
> (II) CHROME(0): monitor0: Using default vrefresh range of 30.00-100.00
> Hz
> (II) CHROME(0): Clock range: 20.00 to 230.00 MHz
> (II) CHROME(0): ViaValidMode: Validating 640x350 (31500)
> (II) CHROME(0): ViaModePrimaryVGAValid
> (II) CHROME(0): Not using default mode "320x175" (bad mode
> clock/interlace/doublescan)
> ...
>
This is certanly needed for DVI output.
> But below there is "hsync out of range" anymore.
>
> Which ranges are needed by openchrome?
>
>> or fix the conf to allow the monitor to send its EDID.
>
> How can I do this?
>
> Regards,
>
> TC
>
>
More information about the Openchrome-users
mailing list